™ E1 SuperMIX DSX Overview Primary Benefits Add the flexibility of DSX to traditional E1 digital • Chassis options include 58.42 cm (23-in.) and distribution frame applications with SuperMIX. This 48.26 cm (19-in.) sizes, providing up to 64 terminations modular DSX system provides a multiple interface point • Modules come with 4 jacks that accept all standard for testing, patching, monitoring, and cross-connecting Bantam-style single and dual patch cords and accessories E1 circuits. A configurable backplane accommodates the • Modules also have manufacturer-configurable termination of E1 switch and MUX equipment through backplanes that accommodate any type of switch a variety of 75- or 120-ohm impedance connectors. and MUX coaxial output • Modular design enables cost management by allowing SuperMIX converts E1 cabling media from 75-ohm you to add modules as your network grows characteristics to 120-ohm for twisted-pair wire-wrap • All Telect DSX products have a lifetime guarantee cross connection on the front of the modules. Individual modules snap into the SuperMIX chassis for instant power connection. The result is vastly improved cable Applications management, distribution frame space savings, installer • High-density central office bays cost savings, and DSX capabilities (patch, test, monitor, • Traditional E1 digital distribution frames cross-connect) for E1 systems. • Individual panels for remote sites and other smaller applications ® Telect, Inc. • USA +1.509.926.6000 • Mexico +1.52.33.3836.3700 Poland +1.48.713.239.100 • UK +1.44.1489.889500 • www.telect.com ® CONNECTING THE FUTURE ™ E1 SuperMIX DSX Specifications Electrical Panel Dimensions 48.26 cm W x 13.34 cm H x 24 cm D Power: -48V office battery for module LEDs (19 in. x 5.25 in. x 9.45 in.) LED drain: 9 mA 58.42 cm W x 13.34 cm H x 24 cm D Insertion Loss: +/-0.5 dB at 772 kHz and 1.024 MHz (23 in. x 5.25 in. x 9.45 in.) Crosstalk: DS1, DS1C, E1: -60 dB Return Loss: -26 dB at 772 kHz and 1.024 MHz Contact Resistance: 0.01 Ohm Characteristic Impedance: 75 Ohm/120 Ohm precision baluns for coax inputs; 100 Ohm or 120 Ohm for wire wrap inputs, depending on impedance of interconnecting equipment Rear View E1 Digital Transmission Rate: 2.048 Mb/s at 120 Ohm impedance Mechanical Insertion Force: 1.9 kg. (4.17 lb.) average Withdrawal Force: 2.4 kg. (5.21 lb.) average Life: Minimum 20,000 insertion/withdrawal cycles Vibration: Per MIL-STD-202F, Method 201A Plastics: Module frame, faceplate, and housing made of Cycolac ABS, Top View grade KJW thermoplastic, UL 94V-0; oxygen index 30% Environmental Humidity: To 95% (operating and nonoperating) Moisture Resistance: Per MIL-STD-202F, Method 106E Salt Spray: Per MIL-STD-202F, Method 101D Temperature: -40 to 149° F (-40 to 65° C) operating Front View -67 to 185° F (-55 to 85° C) nonoperating Thermal Shock: Per MIL-STD-202, Method 107D Ordering Information Description Part Number Side View Chassis 010-0000-2709 chassis shown 58 cm (23-in.)/64-term. (16 module capacity) 010-0000-2701 48 cm (19-in.)/56-term. (14 module capacity) 010-0000-2702 48 cm (19-in.)/56-term with 10x10cm (4x4-in.) cable rings 010-0000-2709 48 cm (19-in.)/56-term with 5x5cm (2x2-in.) cable rings 010-0000-2710 4-Termination Front Cross-connect Modules Wire-wrap I/O, wire-wrap cross-connect 010-2704-1100 BNC I/O, wire-wrap cross-connect 010-2704-1200 RJ48C I/O, wire-wrap cross-connect 010-2704-1800 RJ48C I/O, wire-wrap cross-connect, with +24V LED 010-2704-1801 Accessories 010-2704-1200 module shown Single Blue Nickel Bantam patch cords 040-1000-xxx Dual Blue Nickel Bantam patch cords 040-2000-xxx Bantam looping plugs 040-3000-0000 5-conductor cross-connect wire, 304 M (1000') reel 060115 10 x 10 cm (4 x 4-in.) ring kit 999-0041-2706 5 x 5 cm (2 x 2-in.) ring kit 999-0041-2702 ® Telect, Inc. • USA +1.509.926.6000 • Mexico +1.52.33.3836.3700 Poland +1.48.713.239.100 • UK +1.44.1489.889500 • www.telect.com 9/29/04 ® CONNECTING THE FUTURE