Low-Profile Modular DSX-3 System Copper :: Up to 32 Terminations, DSX + Active Functionality Overview Primary Benefits Build versatility, efficiency and reliability into your network with • Traditional DSX-3 connectivity and versatile active the Broadband Connectivity System II (BCS II), the unique functionality (repeaters, optical transport) in a single space low profile modular solution for DS3 connectivity. saving chassis • 1 RU horizontal chassis provides up to 10 terminations in just The cost-effective and dynamic BCS II offers the optimum blend 1.75 inches for ultra-high density of high density (up to 32 T3/E3s in 23 x 4-inch chassis), cable • PCB technology makes the BCS II a more reliable management and advanced functionality. Module choices connectivity solution than traditional coax systems, while include a broad range of DSX-3 configurations, along with active significantly decreasing overall weight repeater and optical transport units. • Pre-wireable backplane enables rapid expansion and deployment • Industry’s most robust range of chassis options and dynamic modules that include: the 6-port DSX-3, and Vector DS3 Applications media converter and transport • High-density central office bays • Chassis options include 19-inch and 23-inch, 1.75-inch and • Compact horizontal chassis for remote sites 4-inch heights • Point-to-point DS3 extension (optical transport • All T elect DSX-3 products are backed by Telect’s DSX modules) lifetime warranty • Enterprise networks Chassis 19”/24-termination 010-0000-2401BCS © Telect, Inc., All Rights Reserved, 11.8.11/rev.3 1 1.509.926.6000 :: telect.com Low-Profile Modular DSX-3 System Copper :: Up to 32 Terminations, DSX + Active Functionality Ordering Information Chassis Dimensions Description Part Number 19” traditional 19” W x 4” H x 12” D 23” traditional 23” W x 4” H x 12” D Chassis 19”/24-termination 010-0000-2401BCS 19” horizontal 19” W x1.75”Hx8”D 23”/24-termination 010-0000-1401BCS 23”/32-termination 010-0000-3201BCS 23” horizontal 23” W x 1.75” H x 12” D 19”/8-termination horizontal 1 RU 010-0000-0471BCS 23”/10-termination horizontal 1 RU 010-0000-1471BCS DSX-3 Modules DSX-3 Jack Specifications 6-port mini-WECO 010-3201-0410 Electrical 4-port mini-WECO 010-3201-0401 Insertion loss < 0.30 dB at DS3 signal rates for 3-port mini-WECO 010-3201-0407 assem- blies that do not include a Active Modules monitor network< 1.00 dB at DS3 Simplex repeater 710-3201-0002 signal rates for assem- blies that include a single monitor network Duplex repeater 710-3201-0005 DS3 Extension, single mode SC 710-3201-2002-U Crosstalk ≤ -60 dB DS3 Extension, single mode ST 710-3201-2001-U Return loss < -26 dB at DS3, STS-1 and E3 DS3 Extension, multimode SC 710-3201-1002-U rates DS3 Extension, multimode ST 710-3201-1001-U Monitor level 21 dB +/-1.5 dB below signal level Loaded Panels — Modules Included 23”/24-term. panel, 6-port modules 010-3224-0001 Contact resistance < 0.01 ohms 23”/32-term. panel, 6-port modules 010-3232-0001 Interconnect System Characteristic impedance 75 ohms 23”/32-position chassis 010-0000-1402BCS 6-port inter connect module, mini-WECO 010-3201-0402 Mechanical Loaded 19”/24-term. panel 010-3224-0402 Insertion force 10 lbs. (4.6 kg) maximum Accessories BNC patch cord removal tool 907197 Withdrawal force 7 lbs. (3.2 kg) maximum Mini-WECO terminating plug 100293 Life Min. 10,000 insertion/withdrawal Standard WECO looping plug 096032 cycles Pin plug 102147 Mini-WECO circuit guard PLG-MW-BLK Environmental Standard WECO circuit guard PLG-SW-LK Thermal limits 67 to 185°F (-55 to 85° C) operating 32-position designation holders 999-3200-0008 and non-operating Thermal shock Per MIL-STD-202, method 107D Humidity 0 to 95% operating and non- operating Telect provides a complete range of DS3 patch cords/jumpers and cable assemblies. See Telect.com for details and ordering information. © Telect, Inc., All Rights Reserved, 11.8.11/rev.3 2 1.509.926.6000 :: telect.com