T&C Power Conversion Up to 300 Watts of RF Power From 20 kHz to 1 MHz For Industrial, RF Power Source Laboratory And Front Panel view Medical Application. Amplifier/Generator AG 1007 is a a 50 Ohm Load and are accurate robust source of RF power for when unit operates into matched FEATURING: ultrasonic, laser modulation, RFI/ load. Outside of matched • 20 kHz to 2 MHz up to EMI, plasma generation, condition, the model AG 1007’s greater than 200 W laboratory and general industrial power measurement system applications. provides an accurate reading of • Output of 200 Watts Featuring leading edge solid VSWR. h3≤ -20 dBc state design for all RF amplifier When used as amplifier, the AG stages and a built-in DDS signal 1007 is compatible with most • Digital Meter, source, it provides everything for signal and function measures forward, a complete and reliable, generators,computer synthesizer reflected and load controlled RF power delivery cards within its output and system. This unit features bandwidth limits. power “Frequency Recall” when the unit The forced-air cooling system • Automatic Frequency is turned off/on, the unit resets to and the internal power supply the last frequency used. Another are designed to permit operation Recall ongoing T&C commitment to over a wide range of temperature • Front Panel Control provide RF power products of the and global AC line conditions. highest quality, incorporating the The AG 1007 is built to withstand of Amplifier and current requirements for a +5 dBm maximum input. The Generator functions complete remote control and data unit amplifies the inputs of AM, acquisition. • Data acquisition: FM, SSB and pulse modulations. OPERATION OUTPUT PROTECTION Status Monitoring & The AG 1007 produces up to 300 AG 1007 is protected by its Power Measurement at Watts of RF power over a internal control system for 300 Analog Port frequency range from 20 kHz to Watts of total Forward Power 1 MHz. It operates over the entire and 70 Watts of Reflected • RS232 frequency range without band Power. This will protect the communication: Full switching or other adjustments. amplifier output stage from Extended range is possible with Control Of Amplifier & accidental overdrive at the input reduced output power. Gain is and an extreme mismatch at the Generator Functions rated at 55 dB with a typical gain Output. • AGC or Power flatness of ±1 dB. GENERAL Leveling: Gain Control The Front Panel offers a LCD T&C’s products are designed to display of Forward, Reflected and 110 Halstead Street be reliable, compact and light in to better than ±0.5 dB Rochester, New York 14610 USA Load Power readings, RF Status, weight. The use of conservatively Tel: 585.482.5551 • Pulse and Sweep of Fax: 585.482.8487 MGC/AGC setups and operating rated components ensures high www.tcpowerconversion.com sales@tcpowerconversion.com frequency in Generator Mode. RF internal signal reliability and eliminates the Power meters are calibrated into need for periodic calibration. generator www.tcpowerconversion.com Rev. A, November 2009 Page 1 of 2 sales@tcpowerconversion.com T&C POWER CONVERSION AG 1007 Specifications Class Of Operation Output VSWR Protection RF Connectors Class “B” 70 W max reflected power limit for BNC Female: Back Panel Load Impedance > 50 Ohm. Current level protection for Load Impedance < Frequency Of Operation AC Power Connection 50 Ohm. 20 kHz to 2 MHz IEC Standard Power Entry followed by RFI filter. RF Power Output Harmonic Level @ 200W Filter range 0.1 to 30 MHz minimum 50 Ohm load: Better then - 20 dBc for 3-d harmonic, Up to 200W for 20 kHz to 2 MHz any other better then –25 dBc AC Input Current (RMS) Up to 300W for 20 kHz to 1.0 MHz 100 - 120 V ac, 50 - 60 Hz, 9.0 A Harmonic Level @ 300W 200 - 240 V ac, 50 - 60 Hz, 4.5 A Any load: Better than –18 dBc Up to 150W, continuous operation. Cooling Spurious Output Forced air, temperature controlled, Mismatch Power Output - 26 dBm equivalent noise level heatsink temperature monitored via Continuous Load Power at 20C: generated by internal circuits RS232 GUI interface. 2:1 VSWR (25 Ohm) 180W minimum 3:1 VSWR (15 Ohm) 115W minimum Output Settings & Control Acoustic level: Limited by heat protection circuit! - Front Panel EDITOR and function 45dBa @ Max Fan Speed @ temp. switches for manual control, Burst and Pulse mode Load Power: - RS232 port for GUI or other 3:1 VSWR, 115W minimum Case computer communication. Rear Limited by Reverse Power Limitter! Designed to meet EMI and RFI Panel. shielding requirements AL chassis, - SubD 25 Analog and Digital I/O . yellow conductive finish. Gain Port power scale 1V=100W. Rear Front Panel: T&C off-white. 55 dB @ 300W / 0.45 MHz Panel Cover: T&C black. ±1 dB 50 kHz to 2 MHz (@ 200 W) BURST operation Dimensions Pulse range: 1 to 500 usec 135mm x 254 mm x 385 mm RF Input Drive for AGC Period: 1 to 50 milliseconds ( H 5.25” x W 10” x L 15” ) Recommended -5 dBm to 0 dBm for User settings via GUI and RS232 ±0.5 dB gain flatness Weight: 12 kg, 26 lbs. BURST - external Input Drive Source DC to > 200 kHz. User defined Signal or function generator, analog BURST scheme via SubD-25. Mounting computer input capable of up to 1 Vp-p See analog port description for more Table top, stand alone unit. @ 50 Ohm details. Optional: Rack Mount Kit. Input range: -30 to 0 dBm typical, +5 dBm maximum SWEEP operation Environmental conditions 0.02 to 2 MHz. Min time 10 ms, max Temp.: 10° to 30° C ambient Internal RF Source 10s. Settings and activation from GUI Humidity: 80% DDS oscillator: 20 kHz to 2 MHz, only. 1 kHz resolution, Equipment intended for ISM applica- Factory setting for 450 kHz. Output Blanking tions in laboratory and light industrial For pulsed applications, T&C environment. Input and Output Impedance amplifiers and generators offer 50 Ohm blanking of the output signal for minimum noise RF spectrum 2:1 max INPUT VSWR 3:1 max OUTPUT VSWR AG 1007 Performance Chart 300W T&C Power Conversion, Inc. 110 Halstead Street, Suite 7 200W Rochester, NY 14610, USA Tel: 585-482-5551 Fax: 585-482-8487 20 kHz 1 MHz 2 MHz 4 MHz 3 MHz www.tcpowerconversion.com sales@tcpowerconversion.com Total Power Range into 50 Ohm Nominal Power Output