Elite.Parts Manufacturers S STMICROELECTRONICS STP16CP05TTR
About product Datasheet FAQ

STMICROELECTRONICS STP16CP05TTR

Description

IC LED SINK DRVR 16CH CC 24TSSOP

Part Number

STP16CP05TTR

Price

Request Quote

Manufacturer

STMICROELECTRONICS

Lead Time

Request Quote

Category

PRODUCTS - S

Datasheet

pdf file

4224452_1.pdf

564 KiB

Extracted Text

STP16CP05 Low voltage 16-bit constant current LED sink driver Features ■ Low voltage power supply down to 3V ■ 16 constant current output channels ■ Adjustable output current through external SO-24 resistor ■ Serial Data IN/Parallel Data OUT ■ Can be driven by a 3.3V microcontroller TSSOP24 TSSOP24 ■ Output current: 5-100mA (exposed pad) ■ Max clock frequency 30MHz ■ ESD protection 2.5kV HBM, 200V MM Description The STP16CP05 guarantees a 20V output driving The STP16CP05 is a monolithic, low voltage, low capability, allowing users to connect more LEDs in current power 16-bit shift register designed for series.The high clock frequency, 30MHz, makes LED panel displays. The STP16CP05 contains a the device suitable for high data rate 16-bit serial-in, parallel-out shift register that transmission. The 3.3V voltage supply is useful in feeds a 16-bit, D-type storage register. In the applications that interface with a 3.3V micro output stage, sixteen regulated current sources controller. provide from 5mA to 100mA constant current to drive the LEDs. The output current setup time is 40ns (typ), thus improving the system performance. The LEDs' brightness can be controlled by using an external resistor to adjust the STP16CP05 output current. Table 1. Device summary Order codes Package Packaging STP16CP05MTR SO-24 1000 parts per reel STP16CP05TTR TSSOP24 2500 parts per reel STP16CP05XTTR TSSOP24 Exposed Pad 2500 parts per reel July 2007 Rev 4 1/25 www.st.com 25 Contents STP16CP05 Contents 1 Summary description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 Pin connection and description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.3 Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Equivalent circuit and outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 Timing diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 6 Typical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 7 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 2/25 STP16CP05 Summary description 1 Summary description Table 2. Typical current accuracy Current accuracy Output voltage Output current V temp. DD Between bits Between ICs ≥ 1.3V ±1.5% ±5% ≥20 to 100 mA 3.3V to 5V 25°C 1.1 Pin connection and description Figure 2. Pin connection Note: The exposed pad is electrically not connected Table 3. Pin description PIN N° Symbol Name and function 1 GND Ground terminal 2 SDI Serial data input terminal 3 CLK Clock input terminal 4 LE Latch input terminal 5-20 OUT 0-15 Output terminal 21 OE Input terminal of output enable (active low) 22 SDO Serial data out terminal 23 R-EXT Input terminal of an external resistor for constant current programing 24 V Supply voltage terminal DD 3/25 Electrical ratings STP16CP05 2 Electrical ratings 2.1 Absolute maximum ratings Stressing the device above the rating listed in the “Absolute Maximum Ratings” table may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in the Operating sections of this specification is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Refer also to the STMicroelectronics SURE Program and other relevant quality documents. Table 4. Absolute maximum ratings Symbol Parameter Value Unit V Supply voltage 0 to 7 V DD V Output voltage -0.5 to 20 V O I Output current 100 mA O V Input voltage -0.4 to V +0.4 V I DD I GND terminal current 1600 mA GND f Clock frequency 50 MHz CLK 2.2 Thermal data Table 5. Thermal data Symbol Parameter Value Unit T Operating temperature range -40 to +125 °C OPR T Storage temperature range -55 to +150 °C STG DIP-24 60 °C/W TSSOP24 85 °C/W (1) R Thermal resistance junction-case thJC TSSOP24 37.5 °C/W Exposed Pad SO-24 75 °C/W 1. The exposed pad should be soldered directly to the PCB to realize the thermal benefits. 4/25 STP16CP05 Electrical ratings 2.3 Recommended operating conditions Table 6. Recommended operating conditions at 25°C Symbol Parameter Test conditions Min Typ Max Unit V Supply voltage 3.0 5.5 V DD V Output voltage 20 V O I Output current OUTn 3 100 mA O I Output current SERIAL-OUT +1 mA OH I Output current SERIAL-OUT -1 mA OL V Input voltage 0.7V V +0.3 V IH DD DD V Input voltage -0.3 0.3V V IL DD t LE pulse width 20 ns wLAT t CLK pulse width 16 ns wCLK t OE pulse width 200 ns wEN V = 3.3V to 5.0V DD t Setup time for DATA 20 ns SETUP(D) t Hold time for DATA 15 ns HOLD(D) t Setup time for LATCH 15 ns SETUP(L) (1) f Clock frequency Cascade operation 30 MHz CLK 1. If the device is connected in cascade, it may not be possible achieve the maximum data transfer. Please considered the timings carefully. 5/25 Electrical characteristics STP16CP05 3 Electrical characteristics Table 7. Electrical characteristics (V = 3.3V to 5V, T = 25°C, unless otherwise specified.) DD Symbol Parameter Test conditions Min Typ Max Unit V Input voltage high level 0.7V V V IH DD DD V Input voltage low level GND 0.3V V IL DD I Output leakage current V = 20V 10 µA OH OH Output voltage V I = 1mA 0.4 V OL OL (Serial-OUT) Output voltage V I = -1mA V -0.4V V OH OH DD (Serial-OUT) I V = 0.3V, R = 3.9kΩ 4.25 5 5.75 OL1 O ext I Output current V = 0.3V, R = 970Ω 19 20 21 mA OL2 O ext I V = 1.3V, R = 190Ω 96 100 104 OL3 O ext ∆I V = 0.3VR = 3.9kΩ ± 5 ± 8 OL1 O EXT Output current error ∆I between bit V = 0.3VR = 970Ω ± 1.5 ± 3 % OL2 O EXT (All Output ON) ∆I V = 1.3VR =190Ω ± 1.2 ± 3 OL3 O EXT R Pull-up resistor 150 300 600 KΩ SIN(up) R Pull-down resistor 100 200 400 KΩ SIN(down) R = 970 EXT I 4 DD(OFF1) OUT 0 to 15 = OFF Supply current (OFF) R = 240 EXT I 11.2 DD(OFF2) OUT 0 to 15 = OFF mA R = 970 EXT I 4.5 DD(ON1) OUT 0 to 15 = ON Supply current (ON) R = 240 EXT I 11.7 DD(ON2) OUT 0 to 15 = ON Thermal Thermal protection 170 °C 6/25 STP16CP05 Electrical characteristics Table 8. Switching characteristics (V = 5V, T = 25°C, unless otherwise specified.) DD Symbol Parameter Test conditions Min Typ Max Unit V = 3.3V 62 90 DD Propagation delay time, t ns PLH1 CLK-OUTn, LE = H, OE = L V = 5V 39 55 DD V = 3.3V 60 88 DD Propagation delay time, t ns PLH2 LE-OUTn, OE = L V = 5V 41 57 DD V = 3.3V 65 95 DD Propagation delay time, t ns PLH3 OE-OUTn, LE = H V = 5V 43 60 DD V = 3.3V 8 12 DD Propagation delay time, t ns PLH CLK-SDO V = 5V 5 7 DD Propagation delay time, V = 3.3V 18 25 DD t CLK-OUTn, LE = H, ns PHL1 V = V IH DD V = 5V 16 22 OE = L DD V = GND C = 10pF IL L I = 20mA V = 3.0 V V = 3.3V 19 25 DD Propagation delay time, O L t ns PHL2 R = 1KΩ R = 60 Ω LE-OUTn, OE = L EXT L V = 5V 15 21 DD V = 3.3V 23 31 DD Propagation delay time, t ns PHL3 OE-OUTn, LE = H V = 5V 20 27 DD V = 3.3V 8.5 13 DD Propagation delay time, t ns PHL CLK-SDO V = 5V 5.5 8 DD Output rise time V = 3.3V 100 130 DD t 10~90% of voltage ns ON V = 5V 22 35 waveform DD Output fall time V = 3.3V 13 18 DD t 90~10% of voltage ns OFF V = 5V 18 25 waveform DD (1) t CLK rise time 5000 ns r (1) t CLK fall time 5000 ns f 1. In order to achieve high cascade data transfer,please consider tr/tf timings carefully. 7/25 Equivalent circuit and outputs STP16CP05 4 Equivalent circuit and outputs Figure 3. OE terminal Figure 4. LE terminal Figure 5. CLK, SDI terminal 8/25 STP16CP05 Equivalent circuit and outputs Figure 6. SDO terminal Figure 7. Block diagram 9/25 Timing diagrams STP16CP05 5 Timing diagrams Table 9. Truth table SERIAL- CLOCK LE OE OUT0 ............. OUT7 ................ OUT15 SDO IN H L Dn Dn ..... Dn - 7 ..... Dn -15 Dn - 15 L L Dn + 1 No Change Dn - 14 H L Dn + 2 Dn + 2 ..... Dn - 5 ..... Dn -13 Dn - 13 X L Dn + 3 Dn + 2 ..... Dn - 5 ..... Dn -13 Dn - 13 X H Dn + 3 OFF Dn - 13 Note: OUTn = ON when Dn = H OUTn = OFF when Dn = L Figure 8. Timing diagram Note: The latches circuit holds data when the LE terminal is Low. 1 When LE terminal is at High level, latch circuit hold the data it passes from the input to the output. 2 When OE terminal is at Low level, output terminals OUT0 to OUT15 respond to the data, either ON or OFF. 3 When OE terminal is at High level, it switches off all the data on the output terminal. 10/25 STP16CP05 Timing diagrams Figure 9. Clock, serial-in, serial-out 11/25 Timing diagrams STP16CP05 Figure 10. Clock, serial-in, latch, enable, outputs Figure 11. Outputs 12/25 STP16CP05 Typical characteristics 6 Typical characteristics Figure 12. Output current-R resistor EXT Table 10. Output current-R resistor EXT Rext (Ohm) Output current (mA) 976 20 780 25 652 30 560 35 488 40 433 45 389 50 354 55 325 60 300 65 278 70 259 75 241 80 229 85 215 90 13/25 Typical characteristics STP16CP05 Figure 13. Output current vs ± ∆I (%) OL Figure 14. I vs drop out voltage (V ) SET drop 14/25 STP16CP05 Typical characteristics Figure 15. I ON\OFF DD 15/25 Test circuit STP16CP05 7 Test circuit Figure 16. DC characteristic Figure 17. AC characteristic 16/25 STP16CP05 Test circuit Figure 18. Typical application schematic + C = 10µF STP16CP05 Note: V will be determined by the V of the LEDs L F Test condition: Temp. = 25°C, V = 3.0V, V = V , C = 10pF, Freq. = 1MHz, DD IN DD L Ch1 = CLK, Ch2 = SDI, Ch3 = OUTn , Ch4 = V OUT Figure 19. Turn ON output current setup Figure 20. Turn OFF output current setup 17/25 Package mechanical data STP16CP05 8 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 18/25 STP16CP05 Package mechanical data Table 11. TSSOP24 mechanical data mm. inch Dim. Min. Typ Max. Min. Typ. Max. A 1.1 0.043 A1 0.05 0.15 0.002 0.006 A2 0.9 0.035 b 0.19 0.30 0.0075 0.0118 c 0.09 0.20 0.0035 0.0079 D 7.7 7.9 0.303 0.311 E 4.3 4.5 0.169 0.177 e 0.65 BSC 0.0256 BSC H 6.25 6.5 0.246 0.256 K 0° 8° 0° 8° L 0.50 0.70 0.020 0.028 Figure 21. TSSOP24 package dimensions 19/25 Package mechanical data STP16CP05 Table 12. Tape and reel TSSOP24 mm. inch Dim. Min. Typ Max. Min. Typ. Max. A 330 12.992 C 12.8 13.2 0.504 0.519 D 20.2 0.795 N 60 2.362 T 22.4 0.882 Ao 6.8 7 0.268 0.276 Bo 8.2 8.4 0.323 0.331 Ko 1.7 1.9 0.067 0.075 Po 3.9 4.1 0.153 0.161 P 11.9 12.1 0.468 0.476 Figure 22. Reel dimensions 20/25 STP16CP05 Package mechanical data Table 13. SO-24 mechanical data mm. inch Dim. Min. Typ Max. Min. Typ. Max. A 2.65 0.104 a1 0.1 0.2 0.004 0.008 a2 2.45 0.096 b 0.35 0.49 0.014 0.019 b1 0.23 0.32 0.009 0.012 C 0.5 0.020 c1 45°(typ.) D 15.20 15.60 0.598 0.614 E 10.00 10.65 0.393 0.419 e 1.27 0.050 e3 13.97 0.550 F 7.40 7.60 0.291 0.300 L 0.50 1.27 0.020 0.050 S °(max.) 8 Figure 23. SO-24 package dimensions 21/25 Package mechanical data STP16CP05 Table 14. Tape and reel SO-24 mm. inch Dim. Min. Typ Max. Min. Typ. Max. A 330 12.992 C 12.8 13.2 0.504 0.519 D 20.2 0.795 N 60 2.362 T 30.4 1.197 Ao 10.8 11.0 0.425 0.433 Bo 15.7 15.9 0.618 0.626 Ko 2.9 3.1 0.114 0.122 Po 3.9 4.1 0.153 0.161 P 11.9 12.1 0.468 0.476 Figure 24. Reel dimensions 22/25 STP16CP05 Package mechanical data Table 15. TSSOP24 exposed-pad mm inch Dim. Min. Typ. Max. Min. Typ. Max. A 1.2 0.047 A1 0.15 0.004 0.006 A2 0.8 1 1.05 0.031 0.039 0.041 b 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 7.7 7.8 7.9 0.303 0.307 0.311 D1 2.7 0.106 E 6.2 6.4 6.6 0.244 0.252 0.260 E1 4.3 4.4 4.5 0.169 0.173 0.177 E2 1.5 0.059 e 0.65 0.0256 K 0° 8° 0° 8° L 0.45 0.60 0.75 0.018 0.024 0.030 Figure 25. TSSOP24 dimensions 23/25 Revision history STP16CP05 9 Revision history Table 16. Revision history Date Revision Changes 28-Jul-2006 1 First release 21-Dec-2006 2 Final datasheet 17-May-2007 3 Updated Table 7 on page 6 10-Jul-2007 4 Updated Table 9: Truth table on page 10 24/25 STP16CP05 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 25/25

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the STP16CP05TTR have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

TRANSIL 400W 130V BIDIR SMA

product

TVS 600W 12V UNI-DIR DO-214AA

product

TVS 600W 30V BI-DIR DO-214AA

product

TRISIL 100A 360V BIDIRECT SMB

product

TRANSISTOR NPN SS SOT23

product

STMICROELECTRONICS ST10F269Z2Q6 MICROCONTROLLER - 16-BIT MCU WITH MAC UNIT, 128K to 256K BYTE FLASH ...