SST SST-REL-GE

Allen-Bradley RIO Module Reliance AutoMax Module for GE Fanuc Series 90-70 for GE Fanuc Series 90-70 The SST Reliance AutoMax DCS/RIO module The SST Allen-Bradley 1771 Remote I/O scanner allows a GE Fanuc Series 90-70 to control Allen-Bradley connects a GE Fanuc Series 90-70 to a Reliance AutoMax DCS or RIO network. Applications include 1771 Remote I/O. The SST 1771 Remote I/O scanner data acquisition, network monitoring, and peer-to-peer can be used in the GE Fanuc Series 90-70 to control up to 32 Allen-Bradley remote I/O racks. communications. Features: Features: - Operates on Reliance AutoMax DCS networks as a - Support for 57.6, 115.2 and 230.4 Kbaud master or slave - Sample GE Fanuc Series 90-70 ladder logic for setup - Card can monitor (passive) or emulate (active) one or and configuration more drops on a Reliance AutoMax remote I/O - Diagnostic LEDs for quick verification of card network operation - Access the card using VME_RD and VME_WRT - 6-pin terminal connector for quick connection to commands in the GE Fanuc Series 90-70 network and ease when making daisy chain - Diagnostic LEDs for verification of card operation connections - Two BNC connectors included for daisy chain - Access tables on the card using VME_RD and configuration VME_WRT commands in your GE Fanuc 90-70 - Software watchdog for improved reliability GE Fanuc Series 90-70 Configuration: GE Fanuc Series 90-70 Configuration: Configure the SST Allen-Bradley RIO scanner in the Configure the SST Reliance AutoMax module in the GE Fanuc Series 90-70 as a foreign VME module. GE Fanuc Series 90-70 as a foreign VME module. Sample 90-70 ladder logic is provided to assist you with Sample GE Fanuc Series 90-70 ladder logic is provided the setup and configuration. to assist you with setup and configuration. Specifications: Specifications: - Z180 CPU local processor - NEC V40 local processor - 64 Kbytes static RAM in VME standard address space - 128 Kbytes of static RAM in VME standard address - Occupies 1 Kbyte of short address space, set by DIP space switches on the card - Occupies 1 Kbyte of short address space, base address - Responds to Standard Supervisory or Non-Privileged set by DIP switches on the card Address Modifier Codes - Encoder/decoder and transceiver circuitry for - Power requirements: 1 A @ 5 V (does not require sending and receiving packets over the coaxial +/- 12 V) transmission medium o - Operating temperature: 0 to 50C (32 to 122 F) - Responds to Standard Supervisory or Non-Privileged o - Storage temperature: -25 to 70C (-13 to 158 F) Address Modifier Codes - Phoenix MSTB1.5/6ST-5.08 terminal connector - Power requirements: 2 A @ 5 V and 50 mA @ +12 V o - Operating temperature: 0 to 50C (32 to 122 F) VME Specifications: o - Storage temperature: -25 to 70C (-13 to 158 F) - Size: double height (6U), single width card using P1 connector compatible with ANSI/IEEE 1014 VME Specifications: - Capabilities: memory - SD16, SDO8 (EO), SA24 - Size: double height (6U), single width card using P1 registers - SD08(O), SA16 connector compatible with ANSI/IEEE 1014 - Addressing: standard - 64 Kbytes on any 64 Kbyte - Capabilities: memory - SD16, SDO8 (EO), SA24 boundary; short - 1 Kbyte on any 1 Kbyte boundary registers - SD08(O), SA16 - Addressing: standard - 128 Kbytes on any 128 Kbyte Part Number: SST-RMAS-GE boundary; short - 8 bytes on any 1 Kbyte boundary Part Number: SST-REL-GE -85-