SST SST-PFB-PLC5

™ ™ ® The BradCommunications SST PROFIBUS scanner ® ® connects your Allen-Bradley PLC-5 controller to PROFIBUS DP. PROFIBUS DP Scanner For the Allen-Bradley PLC-5 Controller Features • BradCommunications SST PROFIBUS DP Master Configuration Software • Supports all standard PROFIBUS baud rates (up to 12 Mbaud) • Simultaneous operation of PROFIBUS DP Master and Slave • Flash memory for storage of DP Master I/O configuration • Fast, easy set up into PLC-5 backplane, PROFIBUS I/O data is automatically transferred into the PLC-5 processor’s integer (N) files of choice • Supports exported configuration files from the BradCommunications Overview SST DP configuration software The BradCommunications SST PROFIBUS scanner connects your Protocols Allen-Bradley PLC-5 controller to PROFIBUS as a master or slave to scan or • PROFIBUS DP Master V0-Class 1&2 emulate PROFIBUS DP I/O. • PROFIBUS DP Slave V0 Typical Applications • Process application, e.g. waste water treatment • Real-time control in steel industry • Brewery applications The BradCommunications SST PROFIBUS scanner fastens onto the side of any PLC-5 processor that supports a side car and functions with the Allen-Bradley PLC-5 as a co-processor. A 9-pin serial port included on the scanner provides for firmware upgrades in the field and the upload of I/O configurations. The PLC-5 processor logic scan and the PROFIBUS I/O scan are independent of each other. The PLC-5 processor reads the scanner input data during its input scan and writes the output data during its output scan. The scanner continues reading input data from the slaves and writing output data to the slaves independent of what the PLC-5 is doing. Slave status, diagnostic status information on all slaves, network diagnostic counters and DP Master diagnostic counters are maintained by the scanner. ® PROFIBUS DP Scanner Diagnostic & Software Tools Network Specifications ™ ™ BradCommunications SST • PROFIBUS DP Master V0, class 1&2 Protocol • PROFIBUS DP Slave V0 Configuration Software LAN Controller • Siemens ASPC2 • Browse your DP network for slave Slaves Supported • Maximum of 125 devices you want to include in your I/O per Slave • Maximum of 244 bytes in/out DP Master configuration using the • Choose integer file (N) in PLC-5 for all card inputs DPView component • Choose a different integer file (N) for all card outputs I/O Mapping ® • Maximum 1000 words in, 1000 words out (for PLC-5 ) Scanner Software • Mapping depends on the addresses assigned in the configuration you create • Maintains slave status, diagnostic Data Rate • All standard PROFIBUS data rates up to 12 Mbps status information on all slaves, • Belden 3079A ™ ® network diagnostic counters, and Cable • BradConnectivity Brad Harrison 85-0001 DP Master diagnostic counters PVR2 conductor with shield, UL-listed Connector • DB9 female connector • Maintains network and I/O module status information including: Hardware Specifications • Active Slave Station Bit table • Configured Slave Station Bit Bus Interface Allen-Bradley PLC-5 table Processor Intel i960 • Network diagnostic counters 512 KB of local i960 RAM • DP Master diagnostic counters 256 KB of onboard shared memory Memory 512 KB of sectored flash memory Diagnostic LEDs for storage of program and configuration data • COMM, SYS and OK LEDs provide Three LEDs indicate: 1. health of the PROFIBUS network (COMM) immediate notification of network Diagnostics 2. communication status with PROFIBUS slaves (SYS) and system errors 3. that initialization is complete and the module is ok (OK) ® Other PROFIBUS Products Backplane 1.5A @ 5V from a supply delivering Separated Extra Low Current Consumption Voltage (SELV) • PROFIBUS modules for ® ® Operating Temperature 0ºC (32ºF) up to +70ºC (158ºF) Allen-Bradley ControlLogix and Storage Temperature -25ºC (-13°F) up to +70ºC (158°F) ™ SLC 500 Relative Humidity 5% to 95% non-condensing • PROFIBUS network interface cards (PCI, C-PCI, PC/104, ISA, VME64, Ordering Information PCMCIA) with many user interfaces (DLL, OPC, ActiveX…) Part Number Description • PROFIBUS gateways to ASi, Serial PROFIBUS Scanner for Allen-Bradley PLC-5 SST-PFB-PLC5 and Ethernet networks PROFIBUS Scanner for Allen-Bradley ControlLogix, SST-PFB-CLX-RLL • IP67 PROFIBUS I/O modules includes Remote Link Library (M8/M12 connectors) PROFIBUS Scanner for SLC 500 series SST-PFB-SLC • Full metal PROFIBUS connector Gateway for PROFIBUS to serial/Ethernet APP-ESP-GTW • IDC-technique provides quick and error-free connection PROFIBUS PCI interface card SST-PB3-PCU • Optional diagnostic LED IP67 PROFIBUS I/O compact block 4 ports, 8 channels TBDPB-4xxx-B8U reduces downtime PROFIBUS connector with integrated diagnostics, vertical • PROFIBUS media PA9D01-42 PROFIBUS connector, vertical • Cable, cordsets, receptacles PA9S01-42 PROFIBUS connector with integrated diagnostics, MA9D00-42 horizontal Cable stripping tool for use with PROFIBUS connector PBSTRIP PROFIBUS cable 85-001 To contact us: www.woodhead.com Reference Number: DW2006135 Date Published: April 2006 North America: US + 1 800 225 7724 -Canada, +1 519 725 5136 Europe: France, +33 2 32 96 04 20 – Germany, +49 711 782 3740 – Italy, +39 010 59 30 77 – United Kingdom, +44 1495 356300 Asia: China, +86 21 50328080 – Singapore, +65 261 6533 – Japan, +81 45 224 3560 Brad Harrison is a registered trademark and BradConnectivity, BradCommunications and SST are trademarks of Woodhead Industries, Inc. © 2006 Woodhead Industries, Inc.