Interbus Scanner With Remote Link Library Features for Allen-Bradley ControlLogix • Includes Remote Link Library functionality; works with: - RSLINX 2.2 OEM 1 Professional or later - Contact CMD 4.5 or later • Uses the latest Generation 4 (G4) Interbus firmware, including support for InLine and Loop 2 • Supports 2 Mbaud as well as 500 Kbaud interface devices • Uses Interbus PCP V4.0 • Serial port supports CMD for G4 Interbus features • Fast, easy set up into ControlLogix backplane SST~ Interbus Scanner • Interbus 110 is easily mapped into the ControlLogix The SST Interbus scanner connects your Allen-Bradley processor's Input and Output ControlLogix to Interbus. The Remote Link Library software tables provides added functionality to the SST Interbus module by allowing you to remotely monitor or download changes to your • Supports asynchronous scan Interbus configuration. This is done by routing data from mode Phoenix Contact's Configuration, Monitoring, and Diagnostics (CMD) software for Interbus through Rockwell Automation's • Support for the following: - 256 remote bus slave devices RSLinx to the Rockwell Automation ControlLogix backplane. - 256 local bus devices The SST Interbus module then takes this routed data and acts on - 16 remote bus levels in tree the network as if the CMD data were directly connected through topology the local serial port. This allows the user to now use their existing - 62 PCP 4.0 slaves Interbus network to connect through a Rockwell Automation - Scans 3968 Interbus Inputs and ControlLogix controller to RSLinx supported networks including 3936 Interbus Outputs Ethernet and Serial networks .. ·2417 global technical support Affiliations: . Member of Interbus Club . SST-IBS-CLX-RLL is referenced in Rockwell Automation Encompass Programs Interbus Scanner Hardware Specifications • Maximum number of slave devices: 512 (up to 256 remote slave devices, up to 512 remote bus and local bus devices) ·512 Kbytes flash for storage of parameter data • Phoenix Contact USC/4 -1 controller for Interbus functions • Standard Interbus 9-pin O-connector • 9-pin serial connector for upload of software and CMO • COMM SYS and OK LEOs for immediate notification of 110 or network errors • Optical isolation on 9-pin remote bus connector • Environmental: - Storage temperature: -25 to 70C (-13 to 158°F) - Operating temperature: a to 50C (32 to 122°F) - Power requirements: 850 mA @ 5 V, 1.75 mA @ 24V Ordering Information Part Number Oeseri tion SST-IBS-CLX-RLL Interbus Scanner with Remote Link Library for Allen-Bradley ControlLogix /\ INTERBus AMERICAS - EUROPEAN PARTNER www.mySST.com1-800-225-7724 ©Woodhead L.P. 2002 All rights reserved DW200213