Manufacturers
SL POWER / CONDOR POWER GNT60-12
Description
60W 12V/4.2A AC/DC open frame power supply
Part Number
GNT60-12
Price
Request Quote
Manufacturer
SL POWER / CONDOR POWER
Lead Time
Request Quote
Category
POWER
Datasheet
Extracted Text
GNT60 MEDICAL SERIES SINGLE OUTPUT POWER SUPPLY Low Power Medical Power Supplies 60 Watt AC/DC Universal Input Power Supply SUMMARY • 100 - 240 Vac nominal input range • Overvoltage and short circuit protection • Approved to UL, CSA and EN Standards • Class II input available (G2T60) The GNT60 Series is a 60 W universal input AC/DC power supply in a very small footprint. With the medical approvals the GNT60 is ideal for a variety of medical device applications including, small single board computers, battery charging, and running small motors, pumps, and solenoids. The series with full approval to EN60601-1 and EN60950 Standard, improves design-in time and reduces end system compliance costs. O All specifications are typical at nominal input, full load at 25 C unless otherwise stated SPECIFICATIONS OUPUT SPECIFICATIONS INPUT SPECIFICATIONS Output Power Natural Convection 60 Watts max.(65 W with airflow) Input Voltage range Universal input 100-240 nom (85 - 264 max) Vac Total Regulation See table Input frequency 55 Hz +/- 10 Hz Rise time At turn-on 2.0 s max. Input surge current Thermistor limited 37 A max. Transient response Main output 50% 5% max. dev. 1 ms recovery to 0.2 A/ms 1% Ground Leakage current 264 Vac 60 Hz 200 mA (400 mA single fault) Temperature Coef- +/-0.03%/oC Input current 120 Vac 1.2 A ficient 230 Vac 0.7 A Overvoltage protection 125% +/-10% Input fuse F1,F2 3.15 A Short Circuit protection Power cycling Yes EMC INFORMATION ENVIRONMENTAL SPECIFICATIONS o RF emissions EN55011 Conducted Class B Thermal Performance operating ambient 0-70 C Radiated Class A (see ratings chart) o Line freq. harmonics EN61000-3-2 Complies non-operating -40 to +85 C o Voltage fluctuations EN61000-3-3 Complies 0 - 50 C 60 Watts Convection cooled ESD EN61000-4-2 Contact 6 kV o Air 8 kV 50 -70 C ambient derate to 50% Convection cooled Radiated immunity EN61000-4-3 3 V/m Relative Humidity non-condensing 5% - 95% RH Fast Transients (EFT) EN61000-4-4 2 kV Maximum Altitude operating / non-operating 10,000 ft. / 40,000 Line surge immunity EN61000-4-5 DIfferential 1 kV ft. max. Common 2 kV Vibration 5 Hz- 500 Hz 2.5 g rms Conducted immunity EN61000-4-6 3 Vrms Shock per MIL-STD-810E 516.4 part IV Power freq. mag. field EN61000-4-8 3 A/m Voltage dip immunity EN61000-4-11 95% dip, 0.5 cycle 60% dip, 5 cycles 30% dip, 25 cycles Note: Voltage dip immunity at 100 V is done with a 20% load GENERAL SPECIFICATIONS Hold-up time 120 Vac, 60 Hz 16 ms at 60 Watts output Efficiency 120 Vac 60 W output >80 % isolation voltage input to ouput 4000 Vac input to ground 1500 Vac Switching frequency fixed 60 KHz, +/- 5 KHz Safety Approvals UL/EN/IEC 60601-1 CSA22.2 No.601 UL/EN/IEC 60950-1 CSA22.2 No.60950-1 Maximum weight 140 g (0.29 lbs) o o o MODEL NUMBER 40 C Convection 50 C Convection 50 C Airflow RIPPLE REGULATION GNT60-12 12 V 4.2 A 12 V 3.35 A 12 V 5.0 A 120 mV 2% GNT60-15 15 V 4.0 A 15 V 3.7 A 15 V 4.35 A 150 mV 2% GNT60-24 24 V 2.1 A 24 V 1.9 A 24 V 2.7 A 150 mV 2% GNT60-48 48 V 1.1 A 48 V 0.95 A 48 V 1.35 A 300 mV 2% NOTES o 1. Convection cooling rating is 40 Watts worst case (GNT60-12 @ 50 C) o o 2. When the input voltage is less than 90 Vac the operating temperature range is 0 C to 40 C. The ripple and regulation specs. may not be met. 3. Peak output rating is 70 Watts for 1 minute. 4. Noise 0.5% RMS, 1% Pk-Pk, 20 MHz Bandwidth, differential mode. Measured with scope probe directly across output terminals of the power supply. o 5. Heatsink temperatures should not be allowed to exceed 90 C 6. Installation data is online at www.condorpower.com MECHANICAL NOTES INPUT J1 AMP P/N 640445-2 TB1 PIN 1 AC LINE PIN 1 AC LINE PIN 2 AC NEUTRAL PIN 2 AC NEUTRAL 0.187 FASTON GROUND OUTPUT J2 AMP P/N 640445-4 TB2 PIN 1 COMMON PIN 1 COMMON PIN 2 COMMON PIN 2 OUTPUT 1 PIN 3 OUTPUT 1 PIN 4 OUTPUT 1 MATING CONNECTOR (TYCO/AMP) INPUT HOUSING 640250-2 CONTACT 640706-1 OUTPUT HOUSING 640250-4 CONTACT 640706-1 Condor DC Power Supplies Inc. 2311 Statham Parkway, Oxnard CA, 93033, USA. Phone:(805) 486 4565 Fax:(805) 487 8911 Email: condor@condordc.com GNT60 Rev D 10/12/05. Data Sheet © 2005 Condor DC Power Supplies Inc. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Condor accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the GNT60-12 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods