331 Ushers Road, P.O. Box 767, Clifton Park, NY 12065 USA +1 (518) 877-5173 Fax +1 (518) 877-8346 email: sales@SIXNETio.com www.SIXNETio.com Makes Your Job Easier Industrial Ethernet Switches For real-time deterministic performance ● Real-time 10BaseT/100BaseTx auto-detection ● Auto-MDI/MDI-X operation ● Optional fiber optic ports º ● Industrial rated for -40 to +85 C ● UL 508, CSA, and rated ● DC powered - No bulky adapters ● DIN rail or direct panel mounting ● Supports ALL standard IEEE 802.3 Ethernet protocols 5 RJ45 Ports 9 RJ45 Ports 8 RJ45 and 1 Fiber 3 RJ45 and 2 Fiber 2 RJ45 and 1 Fiber 4 RJ45 and 1 Fiber Interface with Ethernet devices Industrial Work Station Ethernet I/O PLC PC Industrial Switches Make Your Job Easier SIXNET Industrial Ethernet Switches Eliminate the difficulties often encountered with installing office-grade devices in industrial settings. These ruggedized switches connect to any ethernet device and provide the important features you have been looking for. Simplify Installation • Increase Reliability • Improve Network Bandwidth • Insure Real-time Operation • Allow for Deterministic Control • 5 RJ45 Ports Why an Industrial Ethernet Switch? SIXNET industrial switches are designed for industrial Industrial switch survives heat & cold environments. Their rugged packaging and protected SIXNET industrial switches work reliably through circuitry keep them working under conditions that the dead of winter and those hot summer days. may cause cheap office-grade units to fail. Industrial Unlike office-grade switches that are intended only applications are demanding - it gets hot, it gets cold - for use in air conditioned offices, SIXNET industrial the power browns out or spikes wildly - and you switches are designed for those places that you don’t need a reliable industrial switch that can keep on going. o want to be-over a temperature range of -40 to 85 C. Lose those bulky power transformers Minimize your wiring headaches SIXNET industrial switches run directly on the DC Eliminate unwieldy bundles of ethernet cables by power that you already have in your control cabinet. placing these efficient wiring concentrators right on Get rid of those cumbersome AC outlet transformers. the plant floor. Simpler and shorter cabling means No AC power means fewer safety issues. If you ship higher reliability, too! your equipment internationally, you can forget about the headaches caused by different line voltages and Forget the Velcro and makeshift brackets incompatible power plugs. SIXNET industrial switches can be DIN rail or direct panel mounted. Their compact footprint fits easily into equipment-filled enclosures. Why use a switch instead of a hub? The common ethernet hub simply broadcasts each Real-time deterministic performance message it receives to every one of its ports. Each SIXNET industrial switches are one of the best and ethernet device also has to wait for its turn to ‘talk’ to easiest ways to insure the real-time operation of your the hub, increasing the likelihood of message collisions; data acquisition and/or control system. With plug therefore, real-time operation is jeopardized and and play ease, simply replace your existing hubs determinism is difficult. Alternatively, the SIXNET with these active switches and you’ll immediately industrial ethernet switch automatically determines and reap the benefits of increased performance. By remembers where an ethernet device is located and eliminating message collision, these switches allow routes messages only through the appropriate port. This for true network determinism. minimizes network loading and enables true deterministic communications over ethernet. 331 Ushers Road, P.O. Box 767, Clifton Park, NY 12065 USA +1 (518) 877-5173 Fax +1 (518) 877-8346 email: sales@SIXNETio.com www.SIXNETio.com Performance Specifications Mounting Dimensions Ethernet switch type Unmanaged, store & forward RJ45 ports (shielded) 10/100BaseT(x) RJ45 speed (auto-negotiating) 10 Mbps or 100 Mbps RJ45 auto-mdi/mdi-x Most models Fiber optic port (dual SC or ST) Multimode or singlemode Fiber optic port speed 100 Mbps (100BaseFX) Max. height off Panel ET-GT-3ES-xxx: 1.75” (4.45 cm) Fiber port wavelength 1300 nm center ET-GT-5ES-1,-2xx,-3xx: 1.75” (4.45 cm) Optimal fiber multimode (mm) 50/125 um, 62.5/125 um ET-GT-5ES-4xx,-5xx: 2.25’ (5.72 cm) Optimal fiber singlemode (sm) 9/125 um, 10/125 um ET-GT-9ES-1;-2xx,-3xx: 2.25” (5.72 cm) Fiber maximum distance 2 km (mm), 15 km (sm) Ethernet protocols supported All standard IEEE 802.3 Broadcast storm protection 5%(9ES), 25%(5ES) of bandwidth Memory bandwidth 1 Gbps (3ES), 1.4 Gbps (5ES), 2 Gbps(9ES) Completely compliant IEEE 802.3, 802.3u, 802.3x Note: Screw holes are provided as an alternative to DIN rail mounting. Auto-sensing on RJ45 ports; Full or half duplex operation Switchable on fiber port 1K (automatic learning, aging, MAC addresses supported Typical Switch Installation and migration) Ethernet isolation 1500 VRMS 1 minute Required supply voltage 10-30 VDC Main Ethernet Backbone 2 W (3ES); 2 W (5ES-1); 3 W (5ES- Power consumption (typical) #SC); 4 W (9ES-1); 6 W (9ES-#SC) º Operating and storage temp. -40 to +85 C OFFICE AREA Humidity (non-condensing) 5 to 95% RH Flammability UL 94V-0 materials UL 508, CSA C22/14; Electrical safety EN61010-1 (IEC1010) Office-grade FCC part 15, ICES 003, EMI emissions switch EN55022, Class B EMC immunity and surge EN61326-1 (EN61000-4- Industrial switch withstand 2, 3, 4, 5 and 6) Vibration IEC68-2-6 UL 1604, CSA C22.2/213 (Class 1, Hazardous locations Div. 2), Cenelec EN50021 (Zone 2) FACTORY FLOOR IEC60825-1, Class 1; FDA 21 Eye safety (fiber models) CFR 1040.10 and 1040.11 Ethernet Industrial Control Computer Ordering Information Cabinet Ethernet Part RJ45 Ports Fiber Ports PLC I/O Number (10/100 Mbps) (100 Mbps) ET-GT-3ES-2SC or ST 2 1 multimode Complete Documentation ET-GT-3ES-3SC or ST 2 1 singlemode is provided on the SIXNET CD or may be ET-GT-5ES-1 5 n/a downloaded from www.get2support.com. ET-GT-5ES-2SC or ST 4 1 multimode Includes applications help for many common ET-GT-5ES-3SC or ST 4 1 singlemode situations. ET-GT-5ES-4SC or ST 3 2 multimode ET-GT-5ES-5SC or ST 3 2 singlemode ET-GT-9ES-1 9 n/a ET-GT-9ES-2SC or ST 8 1 multimode Contact your SIXNET Applications Engineer today! ET-GT-9ES-3SC or ST 8 1 singlemode For instant availability and Accessories the latest product information check out RM-PS-024-01F Universal AC/DC supply; 24 VDC, 1 AMP www.industrialmodem.com SP-ETH-2 Ethernet surge protector (protects 2 RJ45 ports) NOTE: Each SP-ETH-2 includes a grounding kit and two Ethernet patch cables. 331 Ushers Road, P.O. Box 767, Clifton Park, NY 12065 USA +1 (518) 877-5173 Fax +1 (518) 877-8346 email: sales@SIXNETio.com www.SIXNETio.com A Complete Family of I/O Solutions Ethernet I/O Ethernet and RS485 I/O SIXNET can provide you the building blocks for the open systems you are looking for. Three Remote Terminal Unit complementary families of modular DIN rail mounted I/O provide local, remote, enterprise level, or Internet I/O solutions. Ethernet-Ready RTU VersaTRAK is a versatile RTU with powerful 32-bit programming, discrete and analog I/O, datalogging and communications, including support for Ethernet, radios and telephones integrated into a single compact package. Industrial Phone Modems Industrial Modems SIXNET rugged industrial modems eliminate the hassles of mounting a telephone modem in an industrial enclosure. These robust modems are º rated for -30 to +70 C industrial operation. TrakPAK Packaged Systems SIXNET delivers complete I/O cabinets that come to you designed; built; tested; and Contact your SIXNET Applications Engineer today! ready for installation. For the latest information, check out www.SIXNETio.com 331 Ushers Road, P.O. Box 767, Clifton Park, NY 12065 USA +1 (518) 877-5173 Fax +1 (518) 877-8346 email: sales@SIXNETio.com www.SIXNETio.com Switch Datasheet REV 0501