Elite.Parts

Description

Sixnet ET-5RS-4ST-E1 Real-Time-Ring Industrial Ethernet Switch with 3 RJ45 Ports 2 multimode ST 4 km Fiber Ports

Part Number

ET-5RS-4ST-E1

Price

Request Quote

Manufacturer

SIXNET

Lead Time

Request Quote

Category

PRODUCTS - E

Specifications

Environmental

Humidity (non-condensing) 5 to 95% RH
Operating temperature range -40 to +85 °C
Storage temperature range -40 to +85 °C
Vibration IEC60068-2-6

Ethernet Compliance

IEEE 802.1p (QoS / CoS – Quality & Class of Service)
IEEE 802.3 (10Mbps Ethernet supports legacy devices)
IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
IEEE 802.3x (Full-Duplex with Flow Control)

Ethernet Performance

5 Ethernet ports total
Ethernet isolation 1500 VRMS 1 minute
Ethernet protocols supported all IEEE 802.3
Fiber maximum distance (full duplex) 4 km (mm), 20 km (sm), 40 km (long haul) or more
Fiber multimode 50- 62.5/125 um (SC or ST)
Fiber optic port speed 100BaseFX (100 Mbps)
Fiber optic port wavelength 1300 nm center typ.
Fiber singlemode 8-10 9/125 um (SC or ST)
Full or half duplex operation configurable
Intelligent store & forward Ethernet switch
MAC addresses supported 2048
Memory bandwidth 3.2 Gbps
RJ45 MDI/MDIX auto-crossover
RJ45 ports (shielded) 10/100BaseTX
RJ45 speed (10 or 100 Mbps) auto-negotiation
RJ45 TD and RD auto-polarity
Typical latency for 10 Mbps ports 16 us + frame time; Typical latency for 100 Mbps ports 5 us + frame time; varies on load and settings

Physical

Case (UL 94V-0 Lexan & rust-free aluminum case) IP30 protection
DIN rail or direct panel mounting

Power Input

4.0 W (model -1 without fi ber)
5.0 W (model -2 & -3 with 1 fi ber)
6.0 W (models -4 & -5 with 2 fi ber)
Input power (typical - all ports active at 100 Mbps)
MIL-STD-1275 power protection standard
Military surge protection 100 volts for 1 second
Power Input 10-50 VDC (Derate 1.8°C / V above 30V)
Spike potection 5,000 watts (10x for 10 uS) or 250 volts (50x for 100 uS)
Transient protection 15,000 watts peak

Real Time Ring Features

Dual ring support
Link loss recovery time: 30mS + 5mS/hop
Maximum switches in ring: 50+

Standards Compliance

Electrical safety - UL508/CSA C22.2/4: EN61010-1, CE
EMC immunity - EN61000-6-2, CE
EMI emissions - FCC part 15, ICES-003; EN61000-6-4, CE
Eye safety ( fiber models) IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
Hazardous locations: UL1604/CSA C22.2/213 (Class I, Div. 2); EN60079-15 (Zone 2, Category 3), CE (ATEX)

Status Reporting

“OK” contact output up to 0.5 Amp
Modbus Ethernet over UDP

Features

5 ports with up to two fiber optic ports
Dual power with MIL-STD-1275 protection
Pre-configured for true plug and play simplicity
Super-fast, fault tolerant ring redundancy
Truly rugged design with -40 to 85°C operation

Datasheet

Sixnet-ET-5RS-Series-datasheet-7602735091.pdf

141 KiB

Download

Extracted Text

PRODUCT DATASHEET ET-5RS REAL-TIME-RING™ ETHERNET SWITCH WITH 5 PORTS The ET-5RS is a 5 port industrial Ethernet switch featuring Sixnet’s Real-Time-Ring™ which provides very fast, fault-tolerant network redundancy and prioritized message delivery needed in critical real-time systems. These Rings self-configure and just run, without the complex configuration steps required by alternative solutions. This advanced technology delivers reliability and performance, saves you money, and makes your job easier. PRODUCT HIGHLIGHTS  5 ports with up to two Ţ ber optic ports  Super-fast, fault tolerant ring redundancy  Pre-conŢ gured for true plug and play simplicity IDEAL FOR  Truly rugged design with -40 to 85°C operation  Real-time control  Distributed systems  Dual power with MIL-STD-1275 protection  Outdoor / marine use REAL-TIME FAULT-TOLERANT RINGS  Recovery time of 30 mS plus 5 mS per hop!  Ideal for deterministic systems and PLCs  Real-time Modbus over Ethernet monitoring REAL-TIME TRAFFIC PRIORITIZATION  Assure delivery of real-time data  Improve network utilization  User settable priority assignments MANAGED SWITCH FEATURES – At a Lower Cost  User conŢ gurable port settings  Port mirroring for trafŢ c diagnostics  Message Ţ ltering to prevent broadcast storms TROUBLE FREE OPERATION  Firmware upgrades are FREE forever  Ultra-reliable 1,000,000 hours MTBF  -40 to +85 °C operating range  UL/CSA, (CUL), CE, and Hazloc (zone 2) SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM ET-5RS REAL-TIME-RING™ ETHERNET SWITCH WITH 5 PORTS SPECIFICATIONS ETHERNET PERFORMANCE ETHERNET COMPLIANCE  IEEE 802.3 (10Mbps Ethernet supports legacy devices)  5 Ethernet ports total  IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)  Intelligent store & forward Ethernet switch  IEEE 802.3x (Full-Duplex with Flow Control)  Ethernet protocols supported all IEEE 802.3  IEEE 802.1p (QoS / CoS – Quality & Class of Service)  RJ45 ports (shielded) 10/100BaseTX POWER INPUT   RJ45 speed (10 or 100 Mbps) auto-negotiation Input power (typical - all ports active at 100 Mbps)  4.0 W (model -1 without Ţ ber)  RJ45 MDI/MDIX auto-crossover  5.0 W (model -2 & -3 with 1 Ţ ber)  RJ45 TD and RD auto-polarity  6.0 W (models -4 & -5 with 2 Ţ ber)  Fiber optic port speed 100BaseFX (100 Mbps)  Power Input 10-50 VDC (Derate 1.8°C / V above 30V)  Fiber optic port wavelength 1300 nm center typ.  MIL-STD-1275 power protection standard   Fiber multimode 50- 62.5/125 um (SC or ST) Military surge protection 100 volts for 1 second  Transient protection 15,000 watts peak  Fiber singlemode 8-10 9/125 um (SC or ST)  Spike potection 5,000 watts (10x for 10 uS) or 250 volts (50x  Fiber maximum distance (full duplex) 4 km (mm), 20 km for 100 uS) (sm), 40 km (long haul) or more ENVIRONMENTAL   Typical latency for 10 Mbps ports 16 us + frame time;  Operating temperature range -40 to +85 °C Typical latency for 100 Mbps ports 5 us + frame time; varies  Storage temperature range -40 to +85 °C on load and settings  Humidity (non-condensing) 5 to 95% RH  Full or half duplex operation conŢ gurable  Vibration IEC60068-2-6  MAC addresses supported 2048 STANDARDS COMPLIANCE   Memory bandwidth 3.2 Gbps Electrical safety - UL508/CSA C22.2/4: EN61010-1, CE  EMI emissions - FCC part 15, ICES-003; EN61000-6-4, CE  Ethernet isolation 1500 VRMS 1 minute  EMC immunity - EN61000-6-2, CE REAL-TIME-RING™ FEATURES  Hazardous locations: UL1604/CSA C22.2/213 (Class I, Div.  Maximum switches in ring: 50+ 2); EN60079-15 (Zone 2, Category 3), CE (ATEX)  Dual ring support  Eye safety (Ţ ber models) IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11  Link loss recovery time: 30mS + 5mS/hop PHYSICAL STATUS REPORTING  DIN rail or direct panel mounting  Modbus Ethernet over UDP  Case (UL 94V-0 Lexan & rust-free aluminum case) IP30  “OK” contact output up to 0.5 Amp protection  Dimensions - see mechanical drawing ORDERING GUIDE All speciŢ cations are subject to change. Consult factory for latest info. RJ45 Ports FIBER Ports ET-5RS-1-E1 5 MECHANICAL DRAWING ET-5RS-2SC-E1 4 1 multimode SC 4 km ET-5RS-2ST-E1 4 1 multimode ST 4 km ET-5RS-3SC-E1 4 1 singlemode SC 20 km ET-5RS-3ST-E1 4 1 singlemode ST 20 km ET-5RS-3SCL-E1 4 1 singlemode SC 40 km ET-5RS-3STL-E1 4 1 singlemode ST 40 km ET-5RS-4SC-E1 3 2 multimode SC 4 km ET-5RS-4ST-E1 3 2 multimode ST 4 km ET-5RS-5SC-E1 3 2 singlemode SC 20 km ET-5RS-5ST-E1 3 2 singlemode ST 20 km ET-5RS-5SCL-E1 3 2 singlemode SC 40 km ET-5RS-5STL-E1 3 2 singlemode ST 40 km Note: Contact Sixnet for special or long haul Ţ ber transceivers up to 120 km The sufŢ x 1 means preconŢ gured for 1 ring. Contact Sixnet for other options. Sixnet Technology Park • • 331 Ushers Road Ballston Lake, NY 12019 USA Datasheet ET-5RS • • 1.518.877.5173 Fax 1.518.877.8346 sales@sixnet.com Rev April 15, 2009 SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES WWW.SIXNET.COM

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products