SIMPLEX TIME REC. CO. 2190-9155 .09A 2190-9157 .012A INSTAL. INSTRUC. 575-592 SIMPLEX TIME REC. CO. 2190-9161 .04A 2190-9163 .04A 2190-9155 .09A INSTAL..INSTRUC. 575-279 2190-9157 .012A 3333 BAUD RATE 28 VDC INSTAL. INSTRUC. 575-592 519-576 A 2190-9161 .04A 2190-9163 .04A INSTAL..INSTRUC. 575-279 3333 BAUD RATE 28 VDC 519-576 A ® MAPNET II Communicating Devices UL Listed; FM and Zone Adapter Modules (ZAMs) CSFM Approved* Addressable Interface to Conventional Circuits Features MAPNET II ZAMs provide an addressable interface to conventional fire alarm zone circuit devices** including: �� Initiating devices (Monitor ZAM) �� Notification appliance circuits (Signal ZAM) �� Control relays (Control ZAM) These ZAMs are compatible with the following ® Simplex fire alarm control panels when equipped with MAPNET II communications: �� 4100/4100U Series fire alarm control panels Signal/Control ZAM �� 4100 Series Universal Transponders �� 4120 Series Network node fire alarm control panels �� 4020 Series fire alarm control panels �� 2120 Communicating Device Transponders MAPNET II communications can be wired: �� NFPA Style 4/Class B or Style 6/Class A �� Style 4/Class B communications may be wired either “T” tapped or In/Out Convenient DIP switch address selection UL listed to Standard 864 Monitor ZAM Description Description (Continued) MAPNET II zone adapter modules (ZAMs) provide an addressable interface between conventional zone Control ZAMs provide addressable control functions devices and the host fire alarm control panel. such as elevator capture, HVAC control, pressurization fan control, and damper control. The control relay Monitor ZAMs provide status monitoring and provides a DPDT contact (contact ratings are shown on supervision of an initiating device circuit (IDC) zone and page 4). are used for circuits with non-addressable detectors and for other contact closures such as waterflow and tamper General Specifications switches or non-addressable manual stations. Different models of Monitor ZAMs are available for two-wire IDCs Supplied by MAPNET II, Class B, or Class A, and for four-wire IDCs with Class B Communications 24 to 40 VDC with data IDC input. Each type required a separate 24 VDC input Separate 24 VDC required from listed power from a listed fire alarm power supply. Power fire alarm power supply Signal ZAMs supervise and operate 24 VDC notification Refer to reference diagrams on Wiring Information appliances, speakers, and telephone circuits. Output pages 3 and 4 capacity is up to 2 A @ 24 VDC, or 50 W of 25 VRMS Screw terminals for in/out wiring, speakers, or up to three simultaneously activated Wire Connections 18 to 12 AWG wire firefighter phones. The signal ZAM is available for either Style Y/Class B or Style Z/Class A operation for Address Means DIP switch, 8 position notification appliance circuits. 32° F to 120° F (0° C to 49° C) Temperature Range * This product has been approved by the California State Fire Marshal (CSFM) pursuant to intended for indoor operation Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7300-0026:182 for allowable values and/or conditions concerning material presented in this Humidity Range Up to 85% RH at 86° F (30° C) document. It is subject to re-examination, revision, and possible cancellation. This product was not ULC listed or approved by MEA (NYC) as of document revision date. Additional listings may be applicable, contact your local Simplex product supplier for the latest status. ** MAPNET II addressable communications are protected by U.S. Patent No. 4,796,025. S2190-0012-14 12/01 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 ADDRESS CODE ADDRESS CODE SIMPLEX TIME REC. CO. 2190-9155 .09A 2190-9157 .012A INSTAL. INSTRUC. 575-592 2190-9161 .04A 2190-9163 .04A INSTAL..INSTRUC. 575-279 3333 BAUD RATE 28 VDC 519-576 A Product Selection Zone Adapter Modules, Monitor ZAMs (separate 24 VDC power is required) Model Cover Type Description Supervisory Current Alarm Current 2190-9153 Surface Monitor ZAM, Class A (Style D) 2190-9154 Flush 2190-9155 Surface Monitor ZAM, Class B (Style B) 20 mA @ 24 VDC 90 mA @ 24 VDC 2190-9156 Flush 2190-9157 Surface 4-Wire Detector ZAM, Class B IDC input 2190-9158 Flush Zone Adapter Modules, Signal and Control ZAMs (separate 24 VDC power is required) Model Cover Type Description Supervisory Current Alarm Current 2190-9159 Surface Signal ZAM, Class A (Style Z) 15 mA @ 24 VDC 65 mA @ 24 VDC 2190-9160 Flush 2190-9161 Surface Signal ZAM, Class B (Style Y) 15 mA @ 24 VDC 2190-9162 Flush 40 mA @ 24 VDC 2190-9163 Surface Control Relay ZAM, DPDT Contacts 10 mA @ 24 VDC 2190-9164 Flush Typical ZAM Mounting 4-11/16" (119 mm) Square box, 2-1/8" (54 mm) deep Typical ZAM assembly 4-11/16" (119 mm) Square extension ring, 1-1/2" (54 mm) deep Flush cover, 5-7/16" square (138 mm) Surface cover, 4-15/16" square (125 mm) 2 S2190-0012-14 12/01 1 2 3 4 5 6 7 8 ADDRESS CODE Monitor ZAM Reference Wiring Diagram + + 24 VDC - Class B, Style B Monitor 2-Wire monitor circuit ZAM + "T" Tapped MAPNET II - or IN/OUT communications wiring - Shield Monitor Monitor circuit circuit Resettable End of line Return Detector power relay 4- Wire detector Class A/Style D ZAM wiring 2-Wire monitor circuit Signal ZAM Wiring Reference + + 24 VDC Class B/Style Y notification appliance - circuit (speakers shown for reference) - + "T" Tapped or MAPNET II IN/OUT wiring communications - Signal input, audio or phone Shield Primary Class A/Style Z notification appliance circuit Return Signal input, audio or phone 3 S2190-0012-14 12/01 Control ZAM Reference Wiring Diagram Control ZAM N. C. 1 + 24 VDC Common 1 - N.O. 1 + "T" Tapped or MAPNET II IN/OUT wiring communications N. C. 2 - Common 2 Shield Controlled device N.O. 2 Control Power Control ZAM Relay Ratings (DPDT Contacts) Application Resistive Rating Inductive Rating** Power Limited* 2 A @ 28 VDC 1 A @ 28 VDC 2 A @ 28 VDC 1 A @ 28 VDC Non-Power Limited 1/2 A @ 120 VAC 1/2 A @ 120 VAC * DC Voltage must be from a listed Fire Alarm power supply. ** Inductive loads must be properly suppressed. Tyco, Simplex, the Simplex logo, and MAPNET II are trademarks of Tyco International Services AG or its affiliates in the U.S. and/or other countries. Westminster, Massachusetts 01441-0001 USA www.simplexnet.com S2190-0012-14 12/01 © 2001 Simplex Time Recorder Co. DBA TEPG-US (a Tyco company). All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice.