SICK WL160F142

DB_W160_2-15_en.qxp 26.07.2002 10:14 Uhr Seite 8 WL 160 Photoelectric Reflex Switch, Red Light -- DC Scanning range Dimensional drawing 0.01 ... 6 m 11 11 38 Phtotoelectric reflex switch WL 160...3. 1 ■Horizontal and vertical models 2 ■Polarizing filter for detecting ø4.2 10 15.4 8.1 objects with reflecting surfaces ■Contamination control 11 23 with green LED indicator and WL 160...4. contamination control output 1 2 ø4.2 3 Setting options 1 Optics center, receiver 6 Red LED signal All types 2 Optics center, transmitter strength indicator 3 Plug M 8 or (Status output) connection cable 7 Green LED signal 4 Sensitivity control strength indicator 5 Light/dark rotary switch: (Operating reserve) L= light switching D= dark switching D L 4 Operating diagram 5 7 Light reception >1.5 1.5 6 1.0 Switching threshold (1) Red LED indicator without reserve ON OFF Green LED indicator with reserve ON OFF ON Switching output Q light switching OFF ON OFF Switching output Q dark switching C R s V Connection type WL 160-E132 WL 160-E330 WL 160-E430 WL 160-E142 WL 160-E340 WL 160-E440 WL 160-F132 WL 160-F330 WL 160-F430 WL 160-F142 WL 160-F340 WL 160-F440 Accessories Cable receptacles Mounting bracket (included) Reflectors (P250 included) 2 3x0.2 mm 3 pin, M 8 4 pin, M 8 1 1 brn brn brn L+ L+ L+ 3 3 blu blu blu M M M 4 4 blk blk blk Q Q Q 2 wht NC NC = not connected 8 SENSICK 11.5 7.4 9 7.4 11 38 3 23 3 10 15.4 8.1 4.2 3.3 DB_W160_2-15_en.qxp 26.07.2002 10:14 Uhr Seite 9 WL 160 Specifications WL 160- F132 F330 F430 E132 E330 E430 F142 F340 F440 E142 E340 E440 Housing shape Horizontal Vertical Scanning range typ. max./on reflector 0.01 ...6m/PL 80 A typ. max./on reflector 0.005...4m/P 250 (supplied w. equip.) Operating range 0.01 ...3m/P 250 Adjustable sensitivity Potentiometer, 2 rotations w. scaling 270° 1) Light source , light type LED, red light with polarizing filter Light spot diameter Approx. 300 mm at 3 m distance Transmitter dispersion angle Approx. 4.5° 2) Supply voltage V DC 10 ... 30 V S 3) Residual ripple ±10% 4) Current consumption ≤ 25 mA Switching outputs PNP, open collector: Q NPN, open collector: Q Output current I max. 100 mA A Light receiver, switching type Light/dark switching per rotary switch 5) 6) Response time /Max. switching frequ. ≤ 0.5 ms /1000/s 7) 2 Connection type: connection cable PVC, 2 m ; 3 x 0.2 mm , ø 4.2 mm plug 3 pin, M8 plug 4 pin, M8 8) VDE protection class V 9) Protection circuits A, B, C, D Enclosure rating IP 67 Ambient temperature Operation –25 ... +55 °C Storage –40 ... +70 °C Weight With connection cable approx. 60 g With plug approx. 20 g Housing material Housing: PBT; optics: PMMA 1) Average service life 100,000 h at 5) Signal operating time with ohmic 18) Rated voltage DC 50 V C= Interference pulse suppression T = + 25°C load 09) A = V connections reverse-polarity U D= Outputs overload and short- S 2) Limit values 6) With light/dark ratio 1:1 protected circuit protected 3) May not exceed or fall short of 7) Do not bend connection cable B= Inputs and outputs reverse- V tolerances below 0 °C polarity protected S 4) Without load Scanning range and operating reserve Ordering information Type Order no. WL 160-F132 6 022 767 1 0.01 4 6 WL 160-F330 6 022 771 100 0.01 3 4 2 WL 160-F430 6 022 772 0.01 3,5 4,3 WL 160-F142 6 022 769 3 1 WL 160-F340 6 022 773 4 0.01 2,5 3,5 WL 160-F440 6 022 774 0.01 2 3,5 5 WL 160-E132 6 022 759 6 0.01 1,8 2,3 WL 160-E330 6 022 763 10 WL 160-E430 6 022 764 01 2 3 4 5 6 (m) WL 160-E142 6 022 761 Operating range Typ. max. scanning range■■ WL 160-E340 6 022 765 P45 WL 160-E440 6 022 766 APM foil Reflector type Operating Range 100x100 mm 3 Operating 5 1 PL80 A 0.01 . . . 4 m range 1 2 PL250 0.01 . . . 3 m 6 4 2 3 PL50 A/PL40 A 0.01 . . . 3.5 m 0 (m) 1 2 34 5 6 4 PL30 A/PL31A 0.01 . . . 2.5 m 5 PL20 A 0.01 . . . 2 m Scanning range Reflector tap 6 0.01 . . . 1.8 m Diamond Grade SENSICK 9 Operating reserve