SCHNEIDER ELECTRIC APJ3485
Description
Schneider Electric APJ3485 30 Amp, Pin & Sleeve Plug
Part Number
APJ3485
Price
Request Quote
Manufacturer
SCHNEIDER ELECTRIC
Lead Time
Request Quote
Category
PRODUCTS - A
Specifications
Amperage
30 A
Application-Rating
Weatherproof
Approval
UL 514, UL 1010, UL 1682, CSA C22.2
Cable OD Max (in)
1.200
Cable OD Min (in)
0.600
Catalog Number
APJ3485
Commodity Code
51500
Constructional Feature
Corrosion Resistant, Dirt Tight, Dust Tight, Moisture Resistant
Grounding Style
2, Shell, Extra Pole
Item Number
04780
Manufacturer Brand
Arktite (REG TM)
Manufacturer Model
None
Manufacturers
Crouse-Hinds
Maximum Cable Outer Diameter
1.2 in
Minimum Cable Outer Diameter
0.6 in
Number Of Wires
3
Plug Type
Service Inlet
Rating - Amps
30
Rating - Volts
600VAC/250VDC
Voltage
600 VAC At 50 to 400 Hz/250 Vdc
Weight
0.01
Features
- 3 Wire, 4 Pole
- 30 Amps
- Approval UL 514, UL 1682, CSA C22.2
- Circuit breaking compressor
- Copper free aluminum
- Corrosion, dirt, dust and moisture resistant
- Polarized conveyor, motor generator set
- UL Listed and CSA Certified
Datasheet
Extracted Text
2: 5: 50: 95: 98: 100: SYS19: BASE2 JOB: CRMAIN06-0966-2 Name: 1P-966 DATE: JAN 19 2006 Time: 6:04:24 PM Operator: JB COLOR: CMYK TCP: 15001 Typedriver Name: TS name csm no.: 100 Zoom: 100 ® NEMA 4 Watertight 1P Arktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas illustrated here, is for conditions where it Application: is desired to use the contact of the plug sleeve with the detent spring to complete Arktite circuit breaking plugs and receptacles the grounding safety circuit. The extra are used: grounding conductor in the portable � to supply power to portable electrically cable is connected to the plug sleeve by a operated devices such as motor-generator pressure connector.) sets, compressors, heating and cooling units, Each plug contact fits closely the welders, conveyors, lighting systems and opening of its individual arcing chamber. similar equipment Grounding contact is bonded to the � where temporary power is needed, such as plug sleeve. Grounding contact is keyed at trailers, building units, heavy machinery to its proper location to prevent and similar equipment mispolarization. � wherever electrical loads must be quickly Arktite connectors’ gasketing system disconnected from power source provides unsurpassed watertight integrity. � in a typical installation, where a large TM All-aluminum UNI-SHELL threaded machine utilizes a number of electrical motor construction provides added strength to drives and for ease of adjustment, removal, withstand extreme physical abuse. maintenance and replacement, each motor is connected by portable cord and Arktite receptacles rather than permanently wired � in areas where dust, dirt, moisture and corrosion are a problem NEW! � indoors and outdoors in non-hazardous NEMA 4 areas of chemical plants, process industry Rating facilities, meat packing plants, manufacturing plants and similar industrial locations Features: � Circuit breaking: Plugs through 200 ampere rating may be disconnected under load; 400 ampere units are for service disconnect use only. � Receptacles accept only plugs of the same amperage rating, style and number of poles, Arktite Style 2 making it impossible to mismate, and 60 ampere provides for positive polarization. � Extra wide electrical spacing allows for maximum safety. � Insulator materials are the result of intensive testing. Selection has been made based on highest dielectric strength, maximum mechanical and impact resistance, lowest moisture absorption and highest arc tracking resistance. � A variety of installations is possible due to NEW! the availability of several types of back boxes. Smaller � Designed to withstand rough usage and the Cable effects of adverse environments. Range � Reversible interiors, 30, 60 and 100 ampere (except 30 and 60 ampere, 5-pole) Arktite safety circuit under severe service. plug and receptacle interiors are Grounding contact is no longer than the interchangeable using a screwdriver. This others, so grounding circuit is made makes it possible to feed a normally first and broken last. deenergized receptacle from an energized The arc formed by pulling the plug is plug with usual Arktite safety; no energized instantly snuffed in the deep, confined TM contacts are exposed. Arktite’s TRI-LOCK cable grip has insulated arcing chamber while the plug � Additional features are indicated in the view three clamps that tighten around the contact is still a considerable distance at right: cable to securely lock it in place, even inside. The arc cannot travel over to the Grounding contact in Style 2 is bonded to when subjected to extreme flexing and other side of the circuit or to the the receptacle housing. jerking. housing. TM Easily wired interior assemblies in The unique SURE-SEAL cable gland Detent spring forms a grounding receptacles and plugs. See table on page provides a complete environmental seal path from plug sleeve to receptacle 938 for type of contacts in units. by distributing pressure equally around housing. Arktite plugs and receptacles Arktite Style 2, illustrated here, has an the circumference of the cable. are made in two styles. With either style, extra grounding contact which forms a Wrenching surfaces make Arktite the portable appliance is grounded parallel circuit with the circuit formed by the connector quick and easy to assemble. before it is energized and remains plug sleeve and receptacle detent spring, grounded until after it is deenergized. and assures continuity of the grounding (Arktite Style 1, not © 966 US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2006 Cooper Crouse-Hinds STIBOINFO((CRH:66008com:1P:966)) PDFINFO C H 0 0 1 P - 2 2: 5: 50: 95: 98: 100: SYS19: BASE2 JOB: CRMAIN06-0967-29 Name: 1P-967 DATE: JAN 19 2006 Time: 6:05:30 PM Operator: RB COLOR: CMYK TCP: 15001 Typedriver Name: TS name csm no.: 100 Zoom: 100 ® NEMA 4 Watertight Arktite Heavy Duty Circuit 1P Breaking Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas Grounding: Style 1 vs. Style 2 Cooper Crouse-Hinds Arktite devices utilize two methods, or styles, for completing the grounding circuit in plugs and receptacles. NEC reference 250.138 (A) & (B). Style 1 – Metallic STYLE 2 – Metallic Style 2 – Non-Metallic A Style 1 plug is one in which the grounding A Style 2 metallic housing plug is one in In a Style 2 receptacle, the grounding conductor in the flexible cable is bonded to which the grounding conductor in the flexible connection is made before line and load the plug sleeve by a pressure connector. A cable is bonded to the extra (grounding) pole poles engage, and is broken after the line Style 1 receptacle is one which is grounded and metal plug sleeve by a pressure load poles disengage. Furthermore, upon by virtue of the fact that it is an integral part of connector. A Style 2 metallic housing insertion, the plug sleeve of metal shelled a grounded conduit system. On insertion, the receptacle is one in which the extra units, makes contact with detent springs of plug sleeve makes contact with detent (grounding) pole is electrically connected to the grounded receptacle housing before line springs of the grounded receptacle housing the equipment grounding conductor and the and load poles engage, and on withdrawal, metal receptacle housing which itself is remains in contact until after line and load before line and load poles engage, and on grounded by virtue of the fact that it is an poles disengage. Therefore, exposed metal withdrawal, remains in contact until after line integral part of a grounded conduit system. In parts of the portable equipment or plug are and load poles disengage. Therefore, Style 2, non-metallic housing plugs and suitably grounded. exposed metal parts of the portable receptacles, the extra pole is used for equipment or plug are suitably grounded. grounding since the housings are non- Made of conductive. non-metallic Krydon material Metal shelled type Style 2 Style 1 Ground conductor Ground conductor attaches to contact, attaches to shell. which is bonded to shell. © US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2006 Cooper Crouse-Hinds 967 STIBOINFO((CRH:66008com:1P:967)) PDFINFO C H 0 0 1 P - 3 2: 5: 50: 95: 98: 100: SYS19: BASE2 JOB: CRMAIN06-0968-18 Name: 1P-968 DATE: JAN 19 2006 Time: 6:05:35 PM Operator: RB COLOR: CMYK TCP: 15001 Typedriver Name: TS name csm no.: 100 Zoom: 100 ® NEMA 4 Watertight 1P Arktite Heavy Duty Circuit Breaking§ Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas Options: � The following special options are available from factory by adding suffix to Cat. No.: Suffix to be Added to Arktite receptacles have a cast Cat. # Description raised rib located inside the S22.....Reversed contacts. Receptacle receptacle sleeve. The location of assembled with plug interior the rib is in a specific relationship to (exposed contacts), plug the receptacle insulator that houses assembled with receptacle interior the contacts. (recessed contacts). For applications where plug is energized to feed normally de- energized receptacle. Available on 30 through 400 ampere units NOTE: 30 (2, 3, 4-pole), 60 and 100 ampere interiors can be interchanged in the field using a screwdriver. Factory conversion is required for 200 and 400 ampere products. S4......Special polarity. For use where two or more receptacles of the same ampere rating, style and number of poles are to be installed in the same area for use on different voltages and/or frequencies. Prevents insertion of a plug in a receptacle The mating plug has a cast groove with different electrical rating. located on the outside of the plug Available on 20 through 400 ampere sleeve. This groove lines up with the units as follows: raised rib. 1 Receptacle interior rotated 22 ⁄2 degrees to right and plug changed to match (See photo to right) Standard Materials: � Metallic receptacle housings, plug and cord connector bodies – high impact strength copper-free aluminum � Nonmetallic receptacles, plugs and cord ® connectors – Krydon fiberglass-reinforced polyester material Accessories: � Back boxes: 20, 30, 60, 100 and 200 Accessories include a variety of angle adapters, panel adapters and back boxes for Arktite ampere – cast aluminum; 400 ampere – ® receptacles, listed on pages 990-993. Included throughout 1P are wire mesh cable grips and Feraloy iron alloy protective caps for Arktite plugs. � Insulation (metallic products): (2-, 3-, and 4-pole) 30, 60, 100, 200, 400 ampere – Certifications and Compliances: fiberglass-reinforced polyester; 20, 30 ampere (5-pole) – melamine � UL Standards: 1682, 514; 1010 (APJ and NPJ plugs only) � Contacts: pressure, solder, binding screw – � CSA Standard: C22.2 No. 182.1 brass; crimp/solder – leaded red brass; 20, 30, 60, 100 ampere – telurium copper; 200, 400 ampere Typical installation Standard Finishes: � Feraloy—electrogalvanized and aluminum acrylic paint � Aluminum – natural � Krydon fiberglass-reinforced polyester material – grey � Fiberglass-reinforced polyester insulation – (red) � Melamine – natural (brown) � Brass – natural � Leaded red brass – electro-tin-plate § 400A rated units are for service disconnect use only. © 968 US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2006 Cooper Crouse-Hinds STIBOINFO((CRH:66008com:1P:968)) PDFINFO C H 0 0 1 P - 4 2: 5: 50: 95: 98: 100: SYS19: BASE2 JOB: CRMAIN06-0969-13 Name: 1P-969 DATE: JAN 19 2006 Time: 6:05:36 PM Operator: RB COLOR: CMYK TCP: 15001 Typedriver Name: TS name csm no.: 100 Zoom: 100 ® NEMA 4 Watertight Arktite Heavy Duty Circuit 1P Breaking§ Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas Arktite Horsepower Ratings � Locked-Rotor Interrupting � Emergency Interrupting Ampere Ampere Motor Horsepower† H.P. Rating Rating Rating Electrical Plug and 120 240 480 600 Electrical Plug and 120 240 480 600 System Receptacle Volts Volts Volts Volts System Receptacle Volts Volts Volts Volts 30 2 3 7.5 10 30 2310 10 60 5 102520 60 5 102520 Single-phase Single-phase 100 10 20 100 7.5 20 30 30 200 15 40 200 15 40 40 40 30 3510 10 30 3 7.5 15 20 60 10 20 40 50 60 10 20 40 50 Three-phase Three-phase 100 15 30 40 25 100 10 30 40 40 200 30 60 25 15 200 20 60 50 50 Wire Sizes: The table below lists the diameter of the wire recess in Arktite plug and receptacle contacts so that maximum size of bare conductor can be figured. Range of wire sizes shown in table is intended only as a guide. Depending on type of wire used (building wire, flexible or extra flexible cable) and its construction (number and size of strands), bare copper diameters vary widely. Diameter of Wire Recess in Plug and Receptacle Contacts Wire Size‡ Ampere Contact Diameter Rating Type of Recess Building Extra Flex 20 Binding Screw N/A #14-#12 #14-#12 30 (2, 3, & 4-pole) Pressure .281 #10-#6 #10-#8 30 (2, 3, & 4-pole) Crimp/Solder .180 #10-#8** #10-#8 30 (5-pole) Solder .188 #12-#6 #12-#8 60 (2, 3, 4 & 5-pole) Pressure .312 #6-#4 #8-#4 60 (3 & 4-pole) Crimp/Solder .277 #6-#4** #8-#4 100 (2, 3 & 4-pole) Pressure .390 #4-#1 #4-#2 100 (3 & 4-pole) Crimp/Solder .390 #2-#1** #2-#2 200 (Std. 3 & 4-pole) Crimp/Solder .56 #1-4/0 #1-3/0 200 (Lg. 3 & 4-pole) Crimp/Solder .75 4/0-250MCM 3/0-250MCM 400 (Std. 3 & 4-pole) Crimp/Solder .84 250-500MCM 250-400MCM 400 (Lg. 3 & 4-pole) Crimp/Solder 1.25 500-1000MCM 400-750MCM ** Smaller sizes may be used with well reducers – information on request. † Horsepower ratings are based on Cooper Crouse-Hinds testing in which locked-rotor currents were interrupted by withdrawing the plug from the receptacle. It is highly recommended, however, that such use be limited to emergency conditions only; and that a horsepower rated switch be used for motor disconnect. ‡ Do not use wire size smaller than minimum size recommended. § 400A rated units are for service disconnect use only. © US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2006 Cooper Crouse-Hinds 969 STIBOINFO((CRH:66008com:1P:969)) PDFINFO C H 0 0 1 P - 5 2: 5: 50: 95: 98: 100: SYS19: BASE2 JOB: CRMAIN06-0972-12 Name: 1P-972 DATE: JAN 19 2006 Time: 6:05:40 PM Operator: RB COLOR: CMYK TCP: 15001 Typedriver Name: TS name csm no.: 100 Zoom: 100 ® NEMA 4 Watertight 1P Arktite Heavy Duty Circuit Breaking Receptacle Assemblies and Housings 30 A, 600 VAC/250 VDC, 50**-400 hertz Mating Mating Receptacle Assembly Receptacle Plug Connector With ARE Back Boxes Receptacle Mating Mating APR Style 1 Housings Only APJ Plugs† Connectors Style 1 Style 1 Style 1 Description Hub‡ Spring Door Spring Door Threaded Cap Cable Cable Size Cat. # Cat. # Only Cat. # Cat. # Dia. Cat. # Dia. 1 2-wire, ⎫ ⁄2 ARE3211 APJ3275 0.39 to 1.20 APR3255 0.39 to 1.20 AR321 AR327 ⎬ 3 2-pole ⁄4 ARE3212 ⎭ 3 ⎫ 3-wire, ⁄4 ARE3312 APJ3375 0.39 to 1.20 APR3355 0.39 to 1.20 AR331 AR337 ⎬ 3-pole 1 ARE3313 ⎭ 3 4-wire, ⎫ ⁄4 ARE3412 APJ3475 0.39 to 1.20 APR3455 0.87 to 1.02 AR341 AR347 ⎬ 4-pole 1 ARE3413 ⎭ ⎫ 5-wire, APJ3573 .500 to .875 APR3553 .500 to .875 ⎬ 1 ARE3513 AR351 5-pole ⎭ Style 2 Style 2 Style 2 Style 2 3 2-wire, ⎫ ⁄4 ARE3322 APJ3575 .875 to 1.375 APR3555 .875 to 1.375 AR332 AR338 ⎬ 3-pole 1 ARE3323 ⎭ 3 3-wire, ⎫ ⁄4 ARE3422 APJ3485 0.39 to 1.20 APR3465 0.39 to 1.20 AR342 AR348 ⎬ 4-pole 1 ARE3423 ⎭ ⎫ 4-wire, APJ3583 .500 to .875 APR3563 .500 to .875 ⎬ 1 ARE3523 AR352 5-pole APJ3585 .875 to 1.375 APR3565 .875 to 1.375 ⎭ Dimensions ARE Assembly AR Receptacle - Spring Door Plug AR Receptacle - Open and with cap Connector ** For use on systems less than 60 hertz the receptacles, plugs and connectors are for disconnect use only. © 972 US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2006 Cooper Crouse-Hinds STIBOINFO((CRH:66008com:1P:972)) PDFINFO C H 0 0 1 P - 8 2: 5: 50: 95: 98: 100: SYS19: BASE2 JOB: CRMAIN06-0973-7 Name: 1P-973 DATE: JAN 19 2006 Time: 6:05:42 PM Operator: JB COLOR: CMYK TCP: 15001 Typedriver Name: TS name csm no.: 100 Zoom: 100 ® NEMA 4 Watertight Arktite Heavy Duty Circuit Breaking 1P Receptacle Assemblies and Housings 30 A, 600 VAC/250 VDC, 50**-400 hertz Plug Closure Caps: Application: CPK caps for Arktite plugs are used: � where portable equipment is on a standby basis and plugs are not in use � to effectively protect insulation and contacts from excessive moisture, dirt, dust and corrosion � with 30, 60, 100 and 200 ampere plugs with Config. Cat No. # fastening ring and standard 200 ampere plugs for the clamp door housing 2P & 3P & 4P CPK13 5P CPK32 Standard Materials: � Copper-free aluminum Standard Finishes: � Natural Replacement Parts: Config. Receptacle Interior Plug Interior Spring Door Screw Cap 2W 2P ATP275 ATP270 2W 3P ATP278 ATP273 3W 3P ATP276 ATP271 QE50 QE13 3W 4P ATP279 ATP274 4W 4P ATP277 ATP272 4W 5P ATP125 ATP109 N/A N/A 5W 5P ATP94 ATP73 Replacement Pin & Sleeve Contacts: Description Recep Plug Available as a kit only. 5 phase contacts & 1 ground contact included AR30CONKIT AP30CONKIT ** For use on systems less than 60 hertz the receptacles, plugs and connectors are for disconnect use only. © US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright 2006 Cooper Crouse-Hinds 973 STIBOINFO((CRH:66008com:1P:973)) PDFINFO C H 0 0 1 P - 9
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the APJ3485 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Schneider Electric ABL7RE2410 Power Supply - Schneider Electric ABL7RE2410 24VDC Output Voltage, 240...
Schneider Electric ABL8WPS24400 960W 24V 40A Single Output AC-DC Power Supply | DIN Rail | Adjustabl...
Manufacturers





What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods