Solenoid interlocks AZM 160 range Features • Thermoplastic enclosure • Manual / Emergency release • Long life • Double insulated X • High holding force 2,000 N • Adjustable ball latch up to 150 N • 30 N latching force • Wiring compartment • Actuation on de-energisation or energisation • 4 cable entries • Mounting holes in base Voltage • 24 VAC/DC variants • 110 VAC • 230 VAC Always state required supply voltage when ordering 15 78 ¤4 ¤14 40 72 28 5,5 6 9 13 130 Pg11 Pg11 30 Manual Emergency release release • For manual release using M5 triangular key, • For cases of danger available as accessory • Fitting only within the guarded area • For maintenance, setting-up, etc. Info To safeguard up to Control Category 3 to EN 954-1, the Safety System Package No. 13 can be used. This comprises an AES 1235 guard door monitor, an AZS 2305 fail-safe delay timer, an AZM 160-23ypk, an AZM 160-B1S actuator, a Pg cable gland and safety screws with unidirectional screwdriver slot. Approvals HZI C D D S CH USA CAN Schmersal Industrial Switchgear 15 90 57,5 15,5 29 7 18 8 15 25 78 6 Solenoid interlocks AZM 160 range 13 14 L+ LED version Protected against incorrect polarity and voltage spikes, 13 ordering suffix G24 YE GN 24VDC 14 15 YE GN L- 15 Info Further variants not shown here are available on enquiry. The applicable ordering suffix is added at the end of the part number of the solenoid interlock. • Available with 5 N latching force, ordering suffix -2254 • With M 16 x 1.5 cable entry, ordering suffix -M16 • With gold-plated contacts (0.3 μm), ordering suffix -1637 Actuation on de-energisation 13 14 11 12 21 22 21 22 6 6 31 32 12345 31 32 12345 1 NO 2 NO 4 NC 3 NC 0 0 5,2 Contacts/ 5,5 8 11-12 13-14 Switch travel 21-22 21-22 31-32 31-32 5,5 8 5,5 8 With manual release AZM 160-14yrpk AZM 160-23yrpk With emergency release AZM 160-14yrpkn AZM 160-23yrpkn Actuation on energisation 13 14 11 12 21 22 21 22 6 6 31 32 12345 31 32 12345 1 NO 2 NO 4 NC 3 NC 0 0 5,5 8 5,2 Contacts/ 11-12 13-14 Switch travel 21-22 21-22 31-32 31-32 5,5 8 5,5 8 With manual release AZM 160-14yrpka AZM 160-23yrpka With emergency release AZM 160-14yrpkan AZM 160-23yrpkan Notes Circuit diagrams show de-energised condition with actuator inserted (0 in switch travel diagram). Interlocks with actuation on energisation may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened. Actuators must be ordered separately. A selection of suitable actuators can be found in 2.3. Schmersal Industrial Switchgear