Manufacturers
SCEPTRE PB-2457A
Description
Sceptre PB-2457A Adapter - Over-voltage,over-load and short-circuit protection, Power Factor Correction (PFC), EN55022, FCC conducted and radiated emission
Part Number
PB-2457A
Price
Request Quote
Manufacturer
SCEPTRE
Lead Time
Request Quote
Category
PRODUCTS - P
Specifications
BURN-IN
The power supply shall under go a minimum of 4hours Burn-In test under full
Cooling
The power supply will operate with convection cooling. Blocking of vents must not cause damage to the power supply.
EFFICIENCY
Higher than 87%, @ 115/230Vac 60/50Hz input and full load output. Typical is 92%
INPUT CURRENT
2.0Amax
INPUT FREQUENCY RANGE
50Hz to 60Hz.
INPUT RATED VOLTAGE
100VAC to 240VAC
INPUT VOLTAGE RANGE
90VAC to 264VAC.
INRUSH CURRENT
90Amax. at 264VAC input for a cold start at 25oC
MTBF
When the power supply is operating within the limits of this specification the MTBF shall be at least 50,000hours at 25oC (MIL-STD-217F).
NON – OPERATING
The power supply shall be capable of withstanding the following environmental conditions for extended periods of time, without sustaining electrical or mechanical damage and subsequent operational deficiencies.
OPERATING
The power supply shall be capable of operating continuously in any mode without
OVER - CURRENT PROTECTION
The adaptor must have a current limiting function on the output voltage. In overload mode, the output must drop to a low voltage.
OVER - VOLTAGE PROTECTION
Over-voltage protection shall be included in the adaptor circuit. A single component failure must not cause an over voltage condition.
PFC (Power Factor Correction)
Provisions for adding harmonic reduction per EN61000-3-2 must be present. Min 0.9 at output full load, 100~240 VAC input.
Relative Humidity
10% ~ 90%
SHORT - CIRCUIT PROTECTION
The adaptor must withstand a continuous short circuit on the output without damage.
STANDBY POWER
Equal or less than 0.3W
Storage Temperature
-30oC ~ 70oC
Vibration
1.0mm, 10–25Hz, 15 minutes per cycle for each axis (X, Y, Z)
Features
- 100 ~ 240Vac Universal Input
- Convection cooled
- EN55022, FCC conducted and radiated emission
- Impact resistant polycarbonate enclosure
- LED AC power indicator
- Over-voltage,over-load and short-circuit protection
- Power Factor Correction (PFC)
- UL, CE approvals
- Up to 137W continuous external power supply
Datasheet
Extracted Text
GOLDEN PACIFIC ELECTRONICS, INC. 560 South Melrose Street Placentia, CA 92870 www.gpelectronics.com Customer: Customer Model Number: Product Part Number: PB-2457A 1. SAFETY STANDARD The power supply shall be certified by the following international regulatory standards: Country Certified Status Standard UL USA Approved UL 60950-1 CUL Canada Approved CSA C22.2 NO.60950-1 CE Europe Approved Declared & CE Mark FCC USA Test to Comply FCC, Part 15, Class B 2. DIELECTRIC WITHSTANDING STRENGTH (HI-POT) Primary to Secondary DC2121V, 10mA, 1 minute for type test, 3 seconds for production. 3. INPUT FEATURE 3.1 INPUT RATED VOLTAGE: 100VAC to 240VAC 3.2 INPUT VOLTAGE RANGE: 90VAC to 264VAC. 3.3 INPUT FREQUENCY RANGE: 50Hz to 60Hz. 3.4 INPUT CURRENT: 2.0Amax o 3.5 INRUSH CURRENT: 90Amax. at 264VAC input for a cold start at 25 C 3.6 EFFICIENCY: Higher than 87%, @ 115/230Vac 60/50Hz input and full load output. Typical is 92% 3.7 STANDBY POWER: Equal or less than 0.3W 3.8 This power supply shall be compliant with Energy Efficiency Level V. 3.9 PFC (Power Factor Correction): Provisions for adding harmonic reduction per EN61000-3-2 must be present. Min 0.9 at output full load, 100~240 VAC input. DWG Control Number: 91-1350XX-03 Revision: 1 Date: 03/30/11 Page 1 of 1 GOLDEN PACIFIC ELECTRONICS, INC. 560 South Melrose Street Placentia, CA 92870 www.gpelectronics.com 4. OUTPUT FEATURE RATED OUTPUT SPEC. LIMIT REMARK 24Vdc Min. value Max. value Output Regulation 22.80V 25.20V 24V + 5% Output Load 0.00A 5.72A 20MHz Bandwidth 10uF Ripple and Noise - 360mV Ele.Cap.+0.1uF Cer. Cap. No Load Input Power - 0.50W Input 115-230Vac PFC 0.95 - At the full load 100-240Vac Output Overshoot - 10% Turn-on delay time - 3S 115Vac/60Hz (230Vac/50Hz) Hold up time 10mS (20mS) - Transient response - 2000mV 5. PROTECTION FEATURE 5.1 OVER - CURRENT PROTECTION: The adaptor must have a current limiting function on the output voltage. In overload mode, the output must drop to a low voltage. 5.2 OVER - VOLTAGE PROTECTION: Over-voltage protection shall be included in the adaptor circuit. A single component failure must not cause an over voltage condition. 5.3 SHORT - CIRCUIT PROTECTION: The adaptor must withstand a continuous short circuit on the output without damage. DWG Control Number: 91-1350XX-03 Revision: 1 Date: 03/30/11 Page 2 of 2 GOLDEN PACIFIC ELECTRONICS, INC. 560 South Melrose Street Placentia, CA 92870 www.gpelectronics.com 6. ENVIRONMENTAL CONDITIONS 6.1 OPERATING The power supply shall be capable of operating continuously in any mode without performance deterioration in the following environmental conditions. 6.1.1 Operating Temperature: Operating Maximum Coefficient of Temperature Power Output De-rating Power o o ( C) (W) (W/ C) 0 to 30 136 0 30 to 40 136 ~ 131.5 0.45 40 to 70 131.5 ~ 48 2.78 6.1.2 Relative Humidity: 10% ~ 90% 6.1.3 Vibration: 1.0mm, 10–25Hz, 15 minutes per cycle for each axis (X, Y, Z) 6.1.4 Cooling: The power supply will operate with convection cooling. Blocking of vents must not cause damage to the power supply. 6.2 NON – OPERATING The power supply shall be capable of withstanding the following environmental conditions for extended periods of time, without sustaining electrical or mechanical damage and subsequent operational deficiencies. o o 6.2.1 Storage Temperature: -30 C ~ 70 C 6.2.2 Relative Humidity: 10% ~ 90% 6.2.3 Vibration and Shock The power supply shall be designed to withstand normal transportation vibration per MIL–STD-810D, method 514 and procedures X, as it is mounted in the chassis assembly and packed for shipping 7. EMC STANDARDS 7.1 EMI STANDARDS The power supply shall meet the radiated and conducted emission requirements for FCC PART 15, EN55022 CLASS B. DWG Control Number: 91-1350XX-03 Revision: 1 Date: 03/30/11 Page 3 of 3 GOLDEN PACIFIC ELECTRONICS, INC. 560 South Melrose Street Placentia, CA 92870 www.gpelectronics.com 7.2 EMS STANDARDS The power supply shall meet the following EMS standards: 7.2.1 EN61000-4-2: Electrostatic Discharge (ESD) 7.2.2 EN61000-4-3: Radiated Electromagnetic Fields (RS) 7.2.3 EN61000-4-4: Electrical Fast Transient/Burst (EFT) 7.2.4 EN61000-4-5: Surge Immunity. Line to Neutral 7.2.5 EN61000-4-6: Conducted Radio Frequency Disturbances (CS) 7.2.6 EN61000-4-11: Voltage Dips/Short Interruptions/Variations 8. RELIABILITY AND QUALITY CONTROL 8.1 MTBF When the power supply is operating within the limits of this specification the o MTBF shall be at least 50,000 hours at 25 C (MIL-STD-217F). 8.2 BURN-IN The power supply shall under go a minimum of 4 hours Burn-In test under full o o load at 25 C ±5 C. 8.3 COMPONENT DERATING Semiconductor junction temperatures shall not exceed the manufacturer’s maximum thermal rating. 9. WEIGHT The weight of the power supply shall be about 845g. 10. INSULATION RESISTANCE Input to output: 10M OHM(500VDC) 11. LEAKAGE CURRENT The leakage current shall be less than 3.5 mA for Class I when power supply is operated under maximum input voltage and maximum load conditions. 12. ENVIRONMENT-RELATED SUBSTANCES The power supply shall meet the directive: RoHS (2002/95/EC) DWG Control Number: 91-1350XX-03 Revision: 1 Date: 03/30/11 Page 4 of 4 GOLDEN PACIFIC ELECTRONICS, INC. 560 South Melrose Street Placentia, CA 92870 www.gpelectronics.com 13. MAJOR MEASURE EQUIPMENT A. AC SOURCE AFC-500W □ B. POWER METER : Zentech 2100 □ C. ELECTRONIC LOAD: PRODIGIT 3310C □ D. OSCILLOSCOPE: Lecroy LT354 □ E. DIGITAL MULTIMETER: Fluke 45 □ F. DC POWER: WYK-603 □ G. HI-POT TESTER: GOODWILL GPT-605 □ H. HYBRID RECORDER: YOKOGAWA DR130 □ I. CONS. T/H SIMULATOR: TH-A4H 1-150 □ J. INSULATION RESISTANCE TESTER: EXTECH-7620 □ DWG Control Number: 91-1350XX-03 Revision: 1 Date: 03/30/11 Page 5 of 5 GOLDEN PACIFIC ELECTRONICS, INC. 560 South Melrose Street Placentia, CA 92870 www.gpelectronics.com Mechanical Specification: (C14 inlet for PB-series; optional C6 inlet for PBD-series) Note: 1. Dimension are shown in mm. 2. DC CORD: AWG#16, 3feet 3. Weight: 845grams approx 4. Optional output connector: PLEASE REFER TO PRODUCT CATALOG OR “OUTPUT CONNECTOR” LINK ON WEBSITE, WWW.SCEPTREPOWER.COM, FOR MORE OPTIONS OF CONNECTORS. DWG Control Number: 91-1350XX-03 Revision: 1 Date: 03/30/11 Page 6 of 6 GOLDEN PACIFIC ELECTRONICS, INC. 560 South Melrose Street Placentia, CA 92870 www.gpelectronics.com NAMEPLATE: DWG Control Number: 91-1350XX-03 Revision: 1 Date: 03/30/11 Page 7 of 7
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the PB-2457A have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Sceptre PDR-12100A Power Supply - Easy mounting (one-step Installation), Separation of AC and DC. Ex...
Sceptre PDR-12166A Power Supply - Separation of AC and DC. Excellent of Electromagnetic Interference...
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods