Product Demonstrators Introduction AC Drives Analog DC Drives Digital DC Drives Options & Accessories and Training MinPak Plus DC Drives A simple single-phase DC drive in a NEMA 4 enclosure for 1/4-5 HP regenerative or non-regenerative applications With MinPak Plus drives you get the standard features you need and the options and modification kits to meet your specific application requirements now or in the future. What’s more, you get them from stock. MinPak Plus drives feature proven electronic • PowerMatched with Reliance Electric DC AVAILABLE OPTIONS components, which significantly improve drive motors for optimum performance • Remote Operator Adapter Kit for buffering functions, reliability and overall performance. • Field supply for motor shunt field (2-5 HP) and filtering of external signals when drive These include custom Large Scale Integrated • Adjustable minimum and maximum speed, is operated by remote control. (LSI) circuits and a modular power cube acceleration rate, deceleration rate, current • Dynamic Braking Kit that is doubly protected by a circuit breaker limit and IR compensation • Reversing Contactor Kit (Non-regenerative and MOV surge suppressor. A relay prevents • Full-wave, full-control conversion for drives) uncontrolled restarts after power outages. smooth, efficient operation and high • Automatic Reversing Kit (Non-regenerative performance A variety of modification kits allow you to drives only) • Power semi-conductors are contained in tailor these drives to your specific application • Double Pole Circuit Breaker Kit allows easily replaceable power cubes to speed requirements. They can be installed quickly by removal of all voltages from control circuits service and maintenance your Reliance Electric authorized distributor, (Standard on regenerative drives) your own personnel or at the factory. • Built-in surge suppressor protects semi- conductors from line transients for higher MORE OPTIONS reliability STANDARD FEATURES • Circuit breaker eliminates fuse replacement • Tachometer Feedback Kit allows speed for reduced service and maintenance regulation to 0.5% with 95% load change • Compact, protected enclosure is standard requirements with specified tachometer (Standard on • UL certified NEMA 4/12 drive design keeps regenerative drives) • Relay in control circuit prevents automatic out dust, oil and liquids for maximum drive restarting after power outage • Voltage Follower Kit allows the drive to reliability follow an external DC voltage signal • Isolated voltage and current feedbacks for • FDA approved enclosure improved drive reliability and versatility • Instrument Interface/Preset Speed Kit for • Application versatility with optional, plug-in applications where drive speed is controlled • Current limit control protects the drive and kits by a process controller over a speed range, driven machine from damaging current or • Easy installation and service or when an adjustable preset speed is torque levels for improved reliability • 50/60 Hz for worldwide application desired • Motor armature contactor disconnects • Enclosures can be wall mounted vertically • Field Supply Kit for applications requiring power to the drive motor or horizontally for installation flexibility the use of a wound field DC motor • Armature loop DC circuit breaker protects • Fully regenerative, four-quadrant models (Standard on 2 through 5 HP drives) equipment against inverting faults provide contactorless reversing as well as • Test Meter Adapter Kit for measuring (regenerative drives only) hold-back torque capability drive and regulator signal voltages with a • Drive is easily convertible to chassis mount voltmeter for fast, space-saving installation in other • Auxiliary Contact Kit equipment or cabinets • Torque Taper Kit for winder applications (Non-regenerative drives only) • Variety of local or remote operation stations available D-135 MinPak Plus DC Drives ENGINEERING DATA Drive Ratings 115 VAC Input Service Conditions 230 VAC Input Motor HP Rated DC Rated Available Field • Elevation: Up to 3300 feet Available AC Line Input KVA Armature Armature Current (2) Field Voltage (1) (2) (1000 meters) (Amps) Voltage Current (Amps) (Amps) 3.5 0.4 90 2.5 100 3 • Ambient Temperatures: 1/4 - - - - - - - Enclosed Models: 32º F to 104º F 5.2 0.6 90 3.7 100 3 (0º C to 40º C) 1/3 - - - - - - - Chassis Models: 32º F to 131º F 7 0.81 90 5 100 3 (0º C to 55º C) 1/2 3.5 0.81 180 2.5 200 3 • Atmosphere: Non-condensing relative 10.5 1.2 90 7.5 100 3 humidity 5% to 95% 3/4 5.2 1.2 180 3.7 200 3 • AC Line Voltage Variation: +10% of rated - - - - - - 1 voltage 7 1.61 180 5 200 3 • AC Frequency: 48 to 62 Hz - - - - - - 1-1/2 10.5 2.42 180 7.5 200 3 Application Data - - - - - - 2 14 3.22 180 10 200 3 • Service Factor: 1.0 - - - - - - • Maximum Load: 150% for 1 minute 3 21 4.83 180 15 200 3 • Speed Regulation (95% load change): - - - - - - 5 • Voltage Feedback: 1-2% 35 8.05 180 25 200 3 • Tachometer Feedback: 1% or 0.5%* (1) Includes Motor Field Current • Speed Range (2) Stated with optional Field Supply Kit. Standard on 2, 3 and 5 HP models • Voltage Feedback: 20:1 • Tachometer Feedback: 30:1 Adjustments • Maximum Speed (Percent of rated): 50 to 100% • Minimum Speed (Percent of rated): 10 to 50% • Current Limit (Percent of rated): 10 to 150% • IR Drop Compensation: 0 to 12% • Acceleration Rate: 0.5 to 30 seconds linear • Deceleration Rate: 0.5 to 30 seconds linear *Depending on tachometer used. D-136 Product Demonstrators Options & Accessories Digital DC Drives Analog DC Drives AC Drives Introduction and Training Product Demonstrators Introduction AC Drives Analog DC Drives Digital DC Drives Options & Accessories and Training MinPak Plus DC Drives SINGLE-PHASE MINPAK PLUS DRIVES Ordering instructions for NEMA 4/12 enclosed drives 1. Select model number and price drives from selection chart below. 2. Select operator controls as follows: • For local controls select M/N 14C201-14C208 from page D-143 and add $145 x VS-3DC discount if supplied loose or $220 x VS-3DC installed. • For remote controls specify M/N 14C220 (remote adapter kit) and M/N 14C200 lank panel) and add $155 x VS-3DC discount if supplied loose, or $235 x VS-3DC mounted. • For model number and price selection of remote operator stations see page D-185. 3. Select and price additional kit options from pages D-141 through D-145. Drive Selection Chart Drive Rating Non-regenerative Drive Regenerative Drive AC Input DC Output (Volts) Cabinet Chassis(2) Cabinet Chassis(2) HP (Volts) Model Model Model Model 50/60 Hz Armature Field List List List List Number Number Number Number (1) (2) (2) 1/4-3/4 115 90 ✽ 14C10 $850 ✽ 14C20 ✽ 14C30 $1,410 14C40 (1) (2) (2) 1/2 - 1-1/2 230 180 ✽ 14C11 875 ✽ 14C21 ✽ 14C31 1,410 14C41 (2) (2) 2-3 230 180 100/200 ✽ 14C12 900 ✽ 14C22 ✽ 14C32 1,575 14C42 (2) (2) 5 230 180 100/200 ✽ 14C13 1,350 ✽ 14C23 ✽ 14C33 1,790 14C43 (1) If a wound field motor is used with the drive also order field supply kit 14C228 for Non-regenerative or 14C238 for Regenerative MinPak Plus, add $65 (unmounted) or $140 (mounted) x VS-3DC discount. Provides 50 or 100 VDC for 115 VAC input drives and 100 or 200 VDC for 230 VAC input drives. (2) Chassis models are discontinued. Specify cabinet model and a remote adapter kit (Model 14C220) and remove enclosure cover to convert to chassis drive. ✽ Normally carried in stock D-137 FlexPak Plus DC Drives A versatile, reliable single-phase chassis DC drive for non-regenerative (1/4-5 HP) and regenerative (1/4 - 7-1/2 HP) applications With FlexPak Plus DC drives you get the standard features you need and the options and modification kits to meet your specific application variables. FlexPak Plus Drives feature proven electronic • Power semi-conductors are contained in components, which significantly improve drive easily replaceable power cubes to speed functions, reliability and overall performance. service and maintenance These include custom Large Scale Integrated • Built-in surge suppressor helps protect (LSI) circuits and a modular Power Cube semi-conductors from line transients for MORE OPTIONS that’s doubly protected by AC line fuses and higher reliability a MOV surge suppressor. A relay prevents • Field Supply Kit for applications requiring • Relay in control circuit prevents automatic uncontrolled restarts after power outages. the use of a wound field DC motor. restarting after power outage (Standard on 2-7.5 HP drives) • Current limit control protects the drive and FlexPak Plus drives are available immediately • Test Meter Adapter Kit for measuring driven machine from damaging current or from the largest stock of adjustable speed drive and regulator signal voltages with a torque levels for improved reliability drives in the industry. A variety of modification voltmeter. • Motor armature contactor disconnects kits to tailor these drives to your specific • Auxiliary Contact Kit power to the drive motor application requirements can be installed • Torque Taper Kit for winder applications. quickly by your Reliance Electric Authorized • Armature loop DC circuit breaker protects (Non-regenerative drives only) Distributor, or your own personnel or at the equipment against inverting faults • Separate NEMA rated types 1, 3R, 4, 4X factory. (regenerative controllers only) and 12 operator control stations available • Auxiliary panel provides fused AC line for remote operation of the drive (Refer STANDARD FEATURES protection and motor armature contactor to to page D-169 for selection and pricing • Compact, open-chassis design disconnect power to the drive motor information). • Application versatility with optional kit • Remote Operator Adapter Kit for buffering selection. Kits plug into controller quickly and filtering of external signals when drive and easily. is operated by remote control • Easy installation and service • 50/60 Hz for worldwide application AVAILABLE OPTIONS • Full-wave, full-control conversion for • Dynamic Braking Kit smooth, efficient operation and high • Tachometer Feedback Kit allows speed performance regulation to 0.5% with 95% load change • Isolated voltage and current feedbacks for with specified tachometer. (Standard on drive reliability and versatility regenerative drives) • Fully regenerative, four-quadrant models • Reversing Contactor Kit (Non-regenerative provide contactorless reversing as well as drives) hold-back torque capability through 7-1/2 • Automatic Reversing Kit (Non-regenerative HP controllers only) • PowerMatched with Reliance Electric DC • Voltage Follower Kit allows the drive to motors for optimum performance follow an external DC voltage signal • Field supply for motor shunt field (2 - 7-1/2 • Instrument Interface/Preset Speed Kit for HP) applications where drive speed is controlled • Minimum and maximum speed, acceleration by a process controller over a speed range, rate, deceleration rate, current limit and or when an adjustable preset speed is IR compensation are easily adjustable for desired increased application flexibility D-138 Product Demonstrators Options & Accessories Digital DC Drives Analog DC Drives AC Drives Introduction and Training Product Demonstrators Introduction AC Drives Analog DC Drives Digital DC Drives Options & Accessories and Training FlexPak Plus DC Drives ENGINEERING DATA Drive Ratings Service Conditions 115 VAC Input • Elevation: Up to 3300 feet(1000 meters) 230 VAC Input Motor HP • Ambient Temperatures: 32ºF to 131ºF (0ºC Rated AC Line Rated Armature Available Field Available Field DC Armature (Amps) Input KVA Current Voltage Current (Amps) to 55ºC) Voltage (1) (2) (2) (Amps) • Atmosphere: Non-condensing relative 3.5 0.4 90 2.5 100 3 1/4 humidity 5% to 95% - - - - - - • AC Line Voltage Variation: +10% of rated 5.2 0.6 90 3.7 100 3 1/3 voltage - - - - - - • AC Frequency: 48 to 62 Hz 7 0.81 90 5 100 3 1/2 3.5 0.81 180 2.5 200 3 10.5 1.2 90 7.5 100 3 Application Data 3/4 5.2 1.2 180 3.7 200 3 • Service Factor: 1.0 - - - - - - • Maximum Load: 150% for 1 minute 1 7 1.61 180 5 200 3 • Speed Regulation (95% load change): - - - - - - 1.5 Voltage Feedback: 1-2% 10.5 2.42 180 7.5 200 3 • Tachometer Feedback: 1% or 0.5%* - - - - - - 2 • Speed Range 14 3.22 180 10 200 3 • Voltage Feedback: 20:1 - - - - - - 3 21 4.83 180 15 200 3 • Tachometer Feedback: 30:1 - - - - - - 5 35 8.05 180 25 200 3 - - - - - - 7.5 48 11.04 180 36 200 3 (1) Includes Motor Field Curren (2) Stated with optional Field Supply Kit Standard on 2 - 7-1/2 HP models ADJUSTMENTS • Maximum Speed (Percent of rated): 50 to 100% • Minimum Speed (Percent of rated): 10 to 50% • Current Limit (Percent of rated): 10 to 150% • IR Drop Compensation: 0 to 12% • Acceleration Rate: 0.5 to 30 seconds linear • Deceleration Rate: 0.5 to 30 seconds linear *Depending on tachometer used D-139 FlexPak Plus DC Drives SINGLE-PHASE FLEXPAK PLUS DRIVES Ordering instructions for chassis drives 1. Select model number and price drive from selection chart below. 2. Select model number and price remote operator controls from page D-185. 3. Select and price kit options from pages D-152 through D-158. Drive Selection Chart (2) (2) Drive Rating Non-regenerative Drive Regenerative Drive HP DC Output (Volts) Chassis with Auxiliary Panel Chassis with Auxiliary Panel AC Input (volts) 50/60 Hz Armature Field Model Number List Model Number List (1) 1/4-3/4 115 90 ✽ 14C101 $990 ✽ 14C106 $1,415 (1) 1/2 - 1-1/2 230 180 ✽ 14C102 995 ✽ 14C107 1,415 2-3 230 180 100/200 ✽ 14C103 1025 ✽ 14C108 1,635 5 230 180 100/200 ✽ 14C104 1,435 ✽ 14C109 1,695 7-1/2 230 180 100/200 - - ✽ 14C111 2,535 (1) If a wound field motor is used also order field supply kit 14C237 and add $65 List (unmounted) or $140 List (mounted). (2) Includes a model 14C220 remote operator adapter kit, installed. DIMENSIONS ✽ Normally carried in stock D-140 Product Demonstrators Options & Accessories Digital DC Drives Analog DC Drives AC Drives Introduction and Training Product Demonstrators Introduction AC Drives Analog DC Drives Digital DC Drives Options & Accessories and Training FlexPak Plus DC Drives MinPak Plus PRODUCT PUBLICATIONS FlexPak Plus PRODUCT PUBLICATIONS Non-Regenerative Drives Non-Regenerative Drives Data Sheet, 1/4-5 HP, 1-Phase: D-2625 Data Sheet, Single-Phase: D-2652 Instruction Manual containing wiring diagrams and dimensions for Instruction Manual containing wiring diagrams and dimensions for drive and kits, 1/4-5 HP, 1-Phase: D-3838 drive and kits, 1/4-5 HP, Single-Phase: D-3900 Regenerative Drives Regenerative Drives Data Sheet: D-2625 Data Sheet: D-2652 Instruction manual containing wiring diagrams and dimensions for Instruction manual containing wiring diagrams and dimensions for controller and kits: D-3899 drive and kits: D-3901 INSTRUCTION MANUALS FOR KITS Single-Phase Kit Name Model Number I/M MinPak Plus FlexPak Plus MinPak Plus Regen FlexPak Plus Regen Non-Regen Non-Regen Auxiliary “M” Contact 14C219 D2-3383 √ √ √ √ Dancer Follower Kit 14C230 D-3966 √ √ √ √ Dynamic Braking 14C214-14C216 D2-3378 √ √ √ √ Field Supply Kit 14C228 D2-3380 √ Field Supply Kit 14C238 D2-3381 √ Field Supply Kit 14C237 D2-3382 √ √ Inst. Interface Kit 14C222 D-3967 √ √ √ √ Remote Operator Adapter Kit 14C220 D-3979 √ √ Test Meter Adapter Kit 14C225 D-3970 √ √ √ √ Voltage Follower Kit 14C223 D-3971 √ √ √ √ Automatic Reversing Kit 14C226 D2-3384 √ √ Double Pole Disconnect 14C210-14C213 D2-3385 √ Reversing Contactor Kit 14C217-14C218 D2-3377 √ Reversing Contactor Kit 14C293 D2-3293 √ Tach Feedback Kit 14C221 D-3969 √ √ Torque Taper Kit 14C224 D2-3386 √ √ Local Operator Control 14C200-14C208 D-3977 √ √ Accessory Mounting Bracket 14C209 D2-3379 √ D-141 MinPak Plus FlexPak Plus DC Drives DANCER FOLLOWER KIT allows the MinPak Plus/FlexPak Plus drive to MODIFICATION KITS FOR NON-REGENERATIVE AND be controlled automatically in response to a speed reference generated REGENERATIVE DRIVES by a line speed signal and trimmed by a dancer potentiometer. The kit will accept a line speed input signal of 0-4 VDC to 0-10 VDC to obtain The following modification kits are easily installed inside MinPak Plus maximum speed. The input impedance is approximately 25k ohms. or FlexPak Plus drives, either in a cabinet or a chassis configuration. It The dancer potentiometer should be 5k ohms and the optional dancer is essential that the operator’s control selected offer the same features position potentiometer should be 25k ohms. The dancer potentiometer as the modification kit used. and the dancer position potentiometer are not included in this kit. MinPak Applications include web or strip process lines where a drive must FlexPak Plus Plus Description Page HP, Phase closely follow or maintain the position of a dancer and where the (1) Kit Model system has 3 seconds or more of storage. Auxiliary M Contact Kit on this page 1/4-5, 1-Phase 14C219 14C219 Kit Model ✽ 14C230 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $145 List Auxiliary Mounting Bracket on this page 1/4-5, 1-Phase 14C209 N/A Factory Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $220 List Dancer Follower Kit on this page All 14C230 14C230 14C214- 14C214 DYNAMIC BRAKING (DB) KIT reduces the stopping time of the motor Dynamic Braking (DB) Kit on this page 1/4-5, 1-Phase 14C216 14C216 when the STOP button is depressed. Under normal operation, the motor 1/4 - 1-1/2, 14C228 14C237 will coast-to-rest. If a Dynamic Braking Kit has been added, when the Field Supply Kit on this page 1-Phase 14C238 STOP button is depressed, the motor operates as a generator, and the Instrument Interface/ rotating mechanical energy is turned into electrical energy which is D-143 All 14C222 14C222 Preset Speed Kit dissipated as heat in the dynamic braking resistor. 14C201- Local Operator Control D-143 All N/A Stations 14C208 NOTE: Dynamic braking is not a holding brake, and will not keep a Remote Operator Adapter Kit D-143 All 14C220 Std. motor from turning. See selection chart below. Mounts on top of MinPak Plus and separate mount for FlexPak Plus. Test Meter Adapter Kit D-143 All 14C225 14C225 Voltage/Tachometer-Generator MinPak Plus & FlexPak Plus D-143 All 14C223 14C223 Follower Kit (1) Dynamic Braking Kit Drive Rating (1) Three-phase kits have been discontinued. Factory Model Kit List Installed List 1/4-.5 HP @ 115 VAC, 1-Phase ✽ 14C214 $43 $118 AUXILIARY M CONTACT KIT provides a contact which indicates the 2-3 HP @ 230 VAC, 1-Phase state of the M contactor - either open or closed. This kit contains a form C contact [1-N.O. (normally open) and 1-N.C. (normally closed) with a 3/4 HP @ 115 VAC, 1-Phase ✽ 14C215 43 118 common terminal]. 1/2, 1-1/2 HP @ 230 VAC ✽ 14C216 43 118 1-Phase Auxiliary M Contact Kit for all 1/4-7.5 HP single-phase MinPak Plus/ 5 HP @ 230 VAC, 1-Phase FlexPak Plus drives. If this kit is installed in a 1/4-.75 HP Model 14C10/ (1) Three-phase kits have been discontinued. 14C20 or 1/2-1.5 HP Model 14C11/14C21 MinPak Plus, it will also be necessary to order Auxiliary Mounting Bracket Model 14C209. FIELD SUPPLY KIT provides full-wave field excitation for shunt-wound Kit Model ✽ 14C219 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $80 List DC motors. It may be optionally added to drives 1/4 through 1-1/2 HP. Factory Installed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $155 List (An appropriate field supply is standard for 2 through 40 HP MinPak Plus/FlexPak Plus drives.) The kit has a 3 amp capacity and supplies 50 AUXILIARY MOUNTING BRACKET provides a convenient means to or 100 VDC when installed in the 115 V drives. When installed in 230 V mount one or two kits on 1/4 - 1-1/2 HP MinPak Plus drives (14C10 drives, the kit supplies 100 or 200 VDC. and 14C11) and (14C20 and 14C21): Auxiliary M Contact Kit (14C219) Kit Model ✽ 14C228 Non-Regen. MinPak Plus . . . . . . . . . . $65 List and Automatic Reversing Kit (14C226). This kit is supplied as standard Kit Model ✽ 14C238 Regen. MinPak Plus . . . . . . . . . . . . . $65 List in 2-5 HP single-phase controllers. (Models 14C12 and 14C13). Kit Model ✽ 14C237 All FlexPak Plus . . . . . . . . . . . . . . . . $65 List Kit Model ✽ 14C209 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $40 List Factory Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $140 List Factory Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $115 List ✽ Normally carried in stock D-142 Product Demonstrators Options & Accessories Digital DC Drives Analog DC Drives AC Drives Introduction and Training Product Demonstrators Introduction AC Drives Analog DC Drives Digital DC Drives Options & Accessories and Training MinPak Plus FlexPak Plus DC Drives INSTRUMENT INTERFACE/PRESET SPEED KIT enables a MinPak Plus/ REMOTE OPERATOR’S CONTROL STATIONS - For Remote Operator’s FlexPak Plus to operate in one of two modes: (1) Automatically follow Control Station specification and pricing. Refer to page D-185. a milliamp signal from a process controller. (2) Operate at an internally adjusted preset speed or at the speed set by the main speed setting TEST METER ADAPTER KIT provides a convenient means to measure potentiometer. As a process control follower, the kit will accept a 0-5, and monitor MinPak Plus/FlexPak Plus regulator voltages. It acts as an 1-5, 4-20, or 10-50 mA, grounded or ungrounded signal. Even though interface between the regulator module and a user’s voltmeter, which the input signal may only vary over a 5:1 range, the kit can be adjusted should have a minimum sensitivity of 20k ohms per volt. to give a greater operating speed range, such as 20:1, depending upon Kit Model ✽ 14C225 . . . . . . . . . . . . . . . . . . . . . . . . . . $100 List the potentiometer settings on the kit. Should it be desirable to easily Factory Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $175 List select whether the drive speed follows the process controller or have the speed determined manually, order an Operator’s Control Panel with VOLTAGE/TACHOMETER-GENERATOR FOLLOWER KIT enables the an AUTOMATIC-MANUAL selector switch. In the AUTOMATIC position, speed of the MinPak Plus/FlexPak Plus to be controlled automatically the speed will follow the process controller. In the MANUAL position, by a speed reference voltage from the DC tachometer-generator the drive speed is determined by the main speed potentiometer setting. connected to an entirely separate machine. Thus, the speed of one To utilize the preset speed function, install the 14C222 Kit, reconnect motor will follow the speed of a master motor or machine. The kit will one jumper and install a control panel with the AUTOMATIC-MANUAL accept an input signal of 25 to 250 VDC to obtain maximum speed. selector switch. In the AUTOMATIC setting, the drive speed will be The minimum permissible input voltage is 25 VDC to obtain maximum determined by the setting of the potentiometer on the kit. In MANUAL speed. The maximum permissible input voltage is 250 VDC. The input mode, the main speed potentiometer determines the drive speed. impedance is approximately 80k ohms. This Kit can also be used with Kit Model ✽ 14C222 . . . . . . . . . . . . . . . . . . . . . . . . . . . $120 List an AUTOMATIC-MANUAL operators control panel. Factory Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $195 List Kit Model ✽ 14C223 . . . . . . . . . . . . . . . . . . . . . . . . . . . $100 List Factory Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $175 List REMOTE OPERATOR ADAPTER KIT provides convenient terminals, plus buffering and filtering of sensitive signals when a remote operator station with a MinPak Plus is used. The buffering and filtering improves drive reliability and performance when using a remote station. This kit is not required when a local operator’s panel is used with an enclosed MinPak Plus or with a Chassis MinPak Plus/FlexPak Plus drives. Also, add the Blank Plate (Model 14C200) with NEMA 4 Single-Phase MinPak Plus. Kit Model ✽ 14C220 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $75 List Factory Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $150 List Blank Plate Model ✽ 14C200 . . . . . . . . . . . . . . . . . . . . . . $80 List Factory Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $155 List Local Operator’s Control Panels For MinPak Plus Drives Functions Provided Forward/ Automatic List Factory Description Model Speed Torque Run/Jog Kit Installed List Start/Stop Reverse Manual Setting Pot Setting Pot Selector Selector Selector Basic Yes Yes No Yes No No ✽ 14C201 $145 $220 (1) Basic Plus Reversing Yes Yes No Yes Yes No ✽ 14C202 145 220 (2) Basic Plus Automatic/Manual Yes Yes No Yes No Yes ✽ 14C203 145 220 Basic Plus Reversing and Yes Yes No Yes Yes Yes ✽ 14C204 145 220 (1) (2) Automatic/Manual Basic Plus Torque Control Yes Yes Yes Yes No No ✽ 14C205 145 220 (1) Basic Plus Reversing and Torque Control Yes Yes Yes Yes Yes No ✽ 14C206 145 220 Basic Plus Torque Control and Yes Yes Yes Yes No Yes ✽ 14C207 145 220 (2) Automatic/Manual (1) Basic Plus Reversing, Torque Yes Yes Yes Yes Yes Yes ✽ 14C208 145 220 (2) Control and Automatic/Manual (1) Add Contactor Reversing kit if non-regenerative drive (2) Add one of the Follower kits: Instrument Interface Model Number 14C222, Voltage Follower Model Number 14C223 or Dancer Follower Model Number 14C230. ✽ Normally carried in stock D-143 MinPak Plus FlexPak Plus DC Drives ADDITIONAL MODIFICATION KITS FOR ADDITIONAL MODIFICATION KITS FOR NON-REGENERATIVE CONTROLLERS NON-REGENERATIVE DRIVES In addition to the modifications on pages D-142 through D-143, the following are available on non-regenerative drives: AUTOMATIC REVERSING KIT offers an automatic reverse direction capability for single-phase MinPak Plus/FlexPak Plus drives. The MinPak FlexPak Plus Plus Automatic Reversing Kit allows the drive to sequence off one armature Description Page HP, Phase Kit Model contactor and then immediately sequence on the other drive contactor. Automatic Reversing Kit D-143 1/4-5, 1-Phase 14C226 14C226 The control can be either an external switch, such as a limit switch, or Double-Pole Input Disconnect Kit on this page 1/4-5, 1-Phase 14C210- N/A manual with the FORWARD-REVERSE selector switch. Dynamic braking 14C213 should not be used with this kit. Reversing Contactor Kit D-145 1/4-3, 1-Phase 14C217 14C293 This Kit also requires installing a Reversing contactor Kit (page D-145) 1/4-5, 1-Phase 14C218 14C293 Also, an Auxiliary Mounting Bracket (Model Number 14C209) for 1/4 Tachometer Feedback Kit D-145 All 14C221 14C221 - 1-1/2 HP MinPak Plus drive is required. See page D-142 for selection Torque Taper Kit D-145 1/4-5, 1-Phase 14C224 14C224 and pricing. NOTE: For high cyclic duty applications, several reversals each minute, it is advisable to use a Regenerative drive which offers solid-state reversing and eliminates contactor operations for each reversal. Single-phase Regenerative Drives only Kit Model Number ✽ 14C226 . . . . . . . . . . . . . . . . . . . . . . $115 List Factory Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $190 List DOUBLE-POLE INPUT DISCONNECT KIT replaces the existing single pole breaker in the 1/4-5 HP single-phase MinPak Plus drive. The double-pole device, which opens both sides of the AC line, is sometimes required by local codes, and offers a higher degree of protection since all power is removed from the control circuits. Interrupting capacity is in symmetrical RMS amps. Drive Double-pole Input Disconnect Kit Model Model Factory Interrupt Rating (HP) Kit List Cap. Number Number Installed List 1/4-3/4 14C10/14C20 14C210 1000 $85 $160 1/2 - 1-1/2 14C11/14C21 14C211 5000 85 160 2-3 14C12/14C22 14C212 5000 110 185 5 14C13/14C23 14C213 5000 175 250 ✽ Normally carried in stock D-144 Product Demonstrators Options & Accessories Digital DC Drives Analog DC Drives AC Drives Introduction and Training Product Demonstrators Introduction AC Drives Analog DC Drives Digital DC Drives Options & Accessories and Training MinPak Plus FlexPak Plus DC Drives REVERSING CONTACTOR KIT offers a convenient method to change TACHOMETER FEEDBACK KIT interfaces between tachometer-generator the direction of motor rotation.The drive is supplied with a single and the MinPak Plus/FlexPak Plus regulator when speed regulation is motor contactor which offers unidirectional operation. By adding this used. This kit will accept either an AC or DC tachometer-generator with Reversing Contactor Kit, the operator can select the direction of rotation a maximum output voltage of 175 volts. by simply depressing the FOR or REV selector switch. Advantage Of Speed Regulation: Normal voltage regulation using IR NOTE: When ordering this Reversing Kit, it is also necessary to select drop compensation provides 1-2% speed regulation with a 95% load an operator’s control with forward-reverse capability. If automatic change. However, changes in other variables (temperature, frequency reversing is required see Automatic Reversing Kit, page D-144. and voltage) can cause significantly greater speed changes, sometimes as much as 15%. MinPak Plus For improved speed regulation, add a motor-mounted tachometer. Reversing Contactor Factory (1)(2) Drive Rating Kit List Feedback from this tachometer will give 1% speed regulation with a Installed List Kit Model 95% load change, and regulation due to other variables will be held 1/4-3 HP, 1-Phase ✽ 14C217 $100 $175 to 2% of motor base speed. In addition, speed regulation of .5% is 5 HP, 1-Phase ✽ 14C218 130 205 obtainable by using a high performance tachometer-generator (BC-42 (1) Factory installation of these kits is recommended. or equivalent). (2) Three-phase kits have been discontinued. FlexPak Plus NOTE: Similar kit included and mounted on all regenerative MinPak Reversing Contactor Factory Plus/FlexPak Plus drives as standard. (1) Drive Rating Kit List Installed List Kit Model Kit Model ✽ 14C221 . . . . . . . . . . . . . . . . . . . . . . . . . . . $100 List 1/4-3 HP, 1-Phase ✽ 14C293 $200 $275 Factory Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $175 List (1) Factory installation of these kits is recommended. TORQUE TAPER KIT allows fine adjustment of the slope and break point of drive speed-torque curve. It is ideal for simple center-driven winders which require nearly constant tension when operating in the voltage control range only. This requires the motor current (torque) limit to increase as the motor speed decreases. NOTE: This kit is only available on the non-regenerative single-phase MinPak Plus/FlexPak Plus drives. Kit Model ✽ 14C224 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $150 List Factory Installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $225 List ✽ Normally carried in stock D-145 MinPak Plus FlexPak Plus DC Drives NOTES D-146 Product Demonstrators Options & Accessories Digital DC Drives Analog DC Drives AC Drives Introduction and Training