[Print This Datasheet] Procelerant PICOZ500 Pico-ITX Intel® Atom Z500 Series Embedded Single Board Computer FEATURE SUMMARY The Procelerant PICOZ500 Pico-ITX is a single board computer based on the Intel Atom™ Z510 processor. It is designed specifically for use in low-power or battery-powered applications such as patient monitors, test and measurement equipment, gaming, and infotainment systems. The PICOZ500 is also ideally suited to space-constrained applications with a need for passive cooling and low-power operation. The PICOZ500 is available with 512MB DDR2-400 integrated memory and has a MicroSD socket for up to 2GB Flash memory. The PICOZ500 has an integrated video controller that can support a variety of touch-screen LVDS or TTL panels using a cable designed specifically for each panel. A PCI Express Mini Card socket supports modules such as wireless LAN, and a 100-pin expansion connector enables the PICOZ500 to be interfaced to a custom expansion card with application specific I/O. The power source is a single input-voltage power rail that can support operation with two to four Li-Ion or Li-Polymer cells. Additional battery management or Smart Battery support can be provided using an optional battery controller module. Procelerant PICOZ500 Pico-ITX Specifications FEATURE FUNCTION SPECIFICATION FORM FACTOR Size Pico-ITX, 100mm x 72mm, 3.9" x 2.8" PROCESSOR Type Intel Atom™ Z510 Processor 1.1GHz, 512k L2 cache, 400MHz FSB – Check with your RadiSys representative for other processor/memory combinations SYSTEM CONTROLLER Type Intel US15W MEMORY Type Integrated 512MB DDR2-400 using 4 devices VIDEO Type US15W integrated graphics with LVDS and SDVO interfaces LVDS 18-bit or 24-bit Supports resolutions up to 1368 x 768 at 85Hz Integrated backlight driver for panels with LED backlights SDVO Supports resolutions up to 1280 x 1024 at 85Hz NETWORK Controller Intel 82574L Gigabit Ethernet MAC/PHY with header connector and on-board magnetics AUDIO Type Intel High Definition Audio Controller IDT STAC9204 2-channel CODEC Output Mono speaker output, 200mW STORAGE IDE 1.8" IDE header capable of supporting two Ultra ATA/100 devices SDIO microSD socket (max 2GB flash memory) USB Six USB 2.0 ports via on-board headers (including one client port) Four USB 2.0 ports via expansion connector (two shared with on-board USB) SERIAL PORTS Controller COM1 via on-board header, COM2 via expansion connector TOUCH SCREEN Type Support for 4-wire resistive touch screen interface EMBEDDED CONTROLLER Supports SPI, Smart Battery (optional), Power on/off LED BIOS Type General Software Flash 1MB SPI ROM EXPANSION Full size PCI Express Mini Card Socket for optional battery controller Expansion connector for application specific expansion card FRONT PANEL Connector Front panel I/O and mono speaker out POWER MANAGEMENT ACPI 3.0 with states S0, S3, S4, S5, G3 and C0, C1, C2, C3, C4/C4E, C6 POWER CONSUMPTION Designed for operation with a TDP less than 5W POWER INPUT 6 – 16.8V single voltage input FEATURE SPECIFICATION EXPANSION CONNECTOR Signals One x1 PCI Express lane (build option) HDA audio, SPI bus, LPC bus, SMbus, I2C bus, SDVO, eight GPIO Four USB 2.0 (including one shared host and one shared client port) +12V power rail validated over 6V to 16.8V OPERATING SYSTEMS Windows XP Professional Windows XP Embedded with SP2 Windows CE 6.0 R2 Red Hat Linux PHYSICAL SPECIFICATIONS ENVIRONMENT Cooling Forced Air Class EAC1 as defined in the ANSI/VITA 47-2005 Conduction Class ECC1 as defined in the ANSI/VITA 47-2005 Temperature Operating 0°C to 60°C Non-Operating -40°C to 85°C Relative Humidity Operating 5% - 95% non-condensing Non-Operating 5% - 95% non-condensing Shock Operating 50g, half-sine shock pulse, 11ms duration, 3 times per face Packaged 50g, half-sine shock pulse, 17.4ms duration, 3 times per face Vibration Operating Random 5Hz to 2kHz, 12.07 grms, 1hr in each of 3 axes 5Hz – 40Hz: 0.04 g2/Hz 40Hz – 100Hz: 0.04g2/Hz ramping up to 0.1g2/Hz (3dB/oct) 100Hz – 1kHz: 0.1 g2/Hz 1kHz – 2kHz: 0.1g2/Hz ramping down to 0.025g2/Hz(6dB/oct) Packaged As above 5 – 500Hz swept sine, 2.5g (0-p), 5 min dwell at 3 resonances in 3 axes REGULATORY Safety UL60950-1, EN60950-1, IEC60950-1 EMC EN55022, EN55024 and FCC Part 15, Subpart B, Class B Material RoHS compliant, China RoHS Ordering Information Order Codes � PICOZ510–512: SBC with Z510 (1.1 GHz) processor and 512MB Memory. � PICOZ500–IO: I/O board. � PICOZ512–Kit: Starter kit. Includes PICOZ510–512, PICOZ500–IO, NEC touch screen display, power supply and all cables. © 2010 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within this document are subject to change without notice. Procelerant PICOZ500 Pico-ITX DATA SHEET | © 2010 RadiSys Corporation * All other trademarks are the properties of their respective owners.