EPC-2222 (P2000(D)BX2) Quick Reference Card This card provides inform ation to help you quickly configure, install, and operate your single-board com puter. Keep this card in a convenient place for future use. See the back of this card for W eb site, technical support, and start-up configuration settings. EIDE 2 40 1 39 Switches FDD SCSI 2 34 Off On 35 68 1-1 1-2 1 34 1 33 1-3 Not shown in this illustration: processors, 1-4 IDE/SCSI Serial 1 / heatsinks, and support devices. Temperature Activity LED PS/2 Mouse Serial 2 USB0 USB1 2 10 2 10 Monitor 1 9 1 9 14 4 1 JP1 PS/2 Keyboard 3 Temperature 5 1 DIMM 2 = Bank 1 LED Serial 1 2 6 4 Processor 5 9 Connector DIMM 1 = Bank 0 PS/2 Mouse 6 1 3 5 1 Parallel 2 Mounting 1 14 6 4 Holes Processor Connector 25 13 Speaker SM Bus Battery Expansion SP Option MKP Option JP13 1 8 2 Keyboard 1 JP4 JP6 Reset Ground Not Connected 1 Keyboard Clock JP7 JP5 Keyboard Data Keyboard Lock +5 V Out Speaker 8 34525-001 © 2000 RadiSys Corporation August 2000 All Rights Reserved Specifications subject to change without notice Printed in USA   Jumper Settings Technical and Product Support Setup Utility (continued) 2-Pin Jumpers Setup Item Default Setting Accessing the Web Site JP1 JP6 JP7 JP13 Serial 2 Configuration Parallel Port Bi-Directional, 378, IRQ7 In-depth printable service manuals and other documentation are available for download from the RadiSys Web site: None 1–2 None None RS-232 (default) Floppy Disk: Base I/O Address Enabled, Primary Local Bus IDE Adapter Enabled 1–2 None 1–2 1–2 RS-422 http://www.radisys.com Adaptec Ultra-2 SCSI Adapter Disabled Then click on Service and Support to access a link to the 3-Pin Jumpers ECC Config EC manuals, addenda, drivers and BIOS. The documentation for JP4 JP5 I/O Model Enable Memory Gap Disabled current and discontinued products is available at this Web site in Adobe Acrobat .PDF format. Documentation may be read and Alias ISA 512 — 528 MB Disabled 1—2 1—2 SP Model printed using the free Acrobat Reader software. DMA Aliasing Enabled 2—3 2—3 MKP Model Calling Technical Support 16-Bit I/O Recovery 4.5 Switch Settings RadiSys Corporation provides live technical support Monday– 8-Bit I/O Recovery 4.5 Friday, 7:00 a.m.–6:00 p.m. Central Time in the continental USA SW1-1 Not Used Watchdog Timer Status Disabled and 8:30 a.m.–5:00 p.m. in Europe. Watchdog Timer Delay 1.2 sec SW1-2 On-Board ROM Access To expedite your request, have the RadiSys product model and ISA Bus GAT Disabled serial number available. Then call one of the following numbers: Open/Off Flash Memory enabled (default) PCI Delayed Transactions Enabled Closed/On Crisis Recovery Mode enabled • Inside the continental USA, dial 1-800-438-4769. PCI IRQ Line 1 — 4 Auto Select (all IRQ lines) Outside the continental USA, dial 713-541-8200 (add long SW1-3 CMOS RAM USB IRQ Enable Yes distance/international codes). Open/Off Normal operation (default) Latency Timer Auto In Europe, dial +31-36-5365595. Cache Line Size Auto Closed/On Factory default values are loaded Inspection of Contents / Packaging of Product ISA Graphics Device Installed No This product has been tested to assure reliable packaging that SW1-4 Configuration Ports will withstand responsible handling by the carrier. PCI/PNP ISA UMB Region Exclusion Available (All regions) Open/Off M3.0o I/O address 270–273 (default) Caution : Inspect contents immediately and file a claim with the PCI/PNP ISA IRQ Resource Available (All IRQ’s) delivering carrier for any damage.Save the shipping box and Closed/On Map ports to I/O address 370–373 Exclusion packaging material. It should be used for any further shipment of System Alarm Temperature (°C) 60 this equipment. Setup Utility CPU Alarm Temperature (°C) 110 If packaging is damaged and is not suitable for shipping, call Note: The alternating white and shaded areas in the tables below represent Thermal Duty Cycle 37.5% RadiSys Technical Support to obtain new packaging. The individual screens in the Setup Utility. warranty may be void if the product is returned using unapproved PS/2 Mouse Auto Detect or damaged original packaging. Setup Item Default Setting Onboard Speaker Enabled System Time Current (Hours, Minutes, Seconds) Returning Your Product Use Multiprocessor Specification 1.1 System Date Current (Month, Day, Year) CPU BIOS Update Enabled If you are returning a product, place the Returned Material Legacy Diskette A 1.44/1.25 MB 3½” Authorization (RMA) number, along with the product serial Plug & Play O/S No Legacy Diskette B Disabled number, on the packaging materials and correspondence. Secured Setup Configuration Yes IDE Adapter Type Auto (all 4 possible drives) Note: The factory does not accept RMAs sent freight collect. Reset Configuration Data No Memory Cache Enabled Large Disk Access Mode DOS Cache System BIOS Area Write Protect Quick Start Password on Boot Disabled Cache Video BIOS Area Write Protect To begin operating your EPC-2222, perform the following: Fixed Disk Boot Sector Normal Cache Base 0–512 KB Write Back 1. Ensure that all jumper settings match your requirements. Diskette Access Supervisor Cache Base 512–640 KB Write Back 2. Ensure that all switch settings match your requirements. Virus Check Reminder Disabled Cache Extended Memory Area Write Back 3. Install the SBC onto a passive backplane in a chassis. System Backup Reminder Disabled Cache A000–EFFF Disabled (all regions) 4. Attach all necessary peripheral devices to the appropriate Power Savings Disabled Boot Summary Screen Enabled headers and connectors on the SBC. Floppy Check Disabled Standby Timeout Off 5. Power-on the system. Auto Suspend Timeout Off Quiet Boot Screen Enabled 6. Run the Setup Utility if you need to change any settings to POST Errors Enabled Hard Disk Timeout Disabled match your requirements. Note: See the table “Setup Utility” for factory default settings. Hard Disk Pre-Delay 3 sec Video Timeout Disabled Keyboard Numlock Auto Resume on Modem Ring Off To avoid damage or injury, always exercise the following Key Click Disabled Resume on Time Off precautions when handling the equipment: Keyboard Auto-Repeat Rate 30/sec Use a grounding wrist strap or other static-dissipating device Resume Time 00:00:00 (24-hour format) Power-off the system Keyboard Auto-Repeat Delay 1/2 sec Console Redirect Port Disabled Disconnect all power cords ! Serial Port A 3F8/IRQ4 Console Redirect Baud Rate 9600 Serial Port B 2F8/IRQ3