RADISYS IOP-CPCI-10000
Specifications
Board Type
cPCI 6U
Features
- 32/64-bit, up to 66MHz, PCI interface
- 32MB of 64-bit access SDRAM options
- 6U CompactPCI® form factor
- CompactPCI H.110 backplane interface
- Dual PMC connections
- Four Texas Instruments TMS320C6203™ DSP complex option
- Front and rear I/O connectivity for added flexibility
- Full hot-swap hardware capability
- Homologated and certified for worldwide use
- I2O messaging interface
- Intelligent Platform Management Interface (IPMI) support option
- Motorola MPC8260 PowerQUICC II™ PowerPC processor operating at 200MHz
- Tundra® PowerSpan dual PCI to PowerPC bus switch
- Two 10/100BaseT Ethernet connections via rear transition modules
Datasheet
Extracted Text
ARTIC 1000 DATA SHEET F L E X I B L E . H I G H - P E R F O R M A N C E C O M P A C T P C I I / O P L A T F O R M Wide Area Networking (WAN) and telecomm Network (PSTN), packet networks and applications of today are vastly different from wireless networks are also driving the need for those of even five years ago. As this rapid increased network capacity and connectivity. evolution continues, one thing is certain, today’s WAN and telecom platforms need to E-commerce, business-to-business, and be robust while remaining extremely flexible. the high demand for SS7 services like In addition, these platforms need to be enhanced 911, 1-800 number resolution scalable and price/performance is always a and custom calling services, as well as voice critical issue. over IP signaling gateways, are among the FEATURE SUMMARY applications driving these requirements. MARKET TRENDS AND APPLICATIONS • Motorola MPC8260 PowerQUICC II™ PRODUCT DESCRIPTION PowerPC processor operating at 200MHz Tremendous growth in network traffic has ® • Tundra PowerSpan dual PCI to PowerPC been brought on by widespread use of the RadiSys ARTIC 1000 is specifically targeted at bus switch Internet and the ever-expanding client/server customers trying to manage the challenges • Four Texas Instruments TMS320C6203™ architecture. As the volume and type of of increasing their WAN I/O capabilities and DSP complex option multimedia data grows, performance and at the same time addressing their emerging • 32MB of 64-bit access SDRAM options • 32/64-bit, up to 66MHz, PCI interface flexibility are needed to address the needs needs. The ARTIC 1000 is a CompactPCI • 6U CompactPCI® form factor of both today’s as well as future WAN I/O plat-form that more than quadruples • Full hot-swap hardware capability applications. the WAN I/O capabilities in the current • Dual PMC connections ARTIC family. It is designed to have a flexible • CompactPCI H.110 backplane interface Telecom applications are increasingly required architecture and is targeted at carrier class • Front and rear I/O connectivity for added to offer enhanced or intelligent services using applications—the fastest growing segment of flexibility • Two 10/100BaseT Ethernet connections via the SS7 protocol. This increased SS7 usage telecommunications. The ARTIC 1000 also rear transition modules drives bandwidth upgrades for SS7 networks. features low-level monitoring support for SS7 • I2O messaging interface Other conver-gence phenomena of inter- clean channel according to Q.703 Annex. • Intelligent Platform Management Interface networking between Public Switch Telephone (IPMI) support option • Homologated and certified for worldwide use 1 ARTIC 1000 DATA SHEET HIGHEST PERFORMANCE IN INDUSTRY DESIGNED FOR CARRIER CLASS APPLICATIONS The high-performance architecture of the The ARTIC 1000 is designed for worldwide ARTIC 1000 CompactPCI I/O Platform carrier class applications. RadiSys’ extensive enables RadiSys to provide the most homologation process has validated it powerful base adapter to its customers. for use in all major countries worldwide. Featuring the 200MHz Motorola PowerQUICC Its high mean-time-between-failure rate II, Tundra’s PowerSpan bus switch and exceeds critical uptime requirements of the optional Texas Instruments ’C6X DSPs, most demanding customers. The Intelligent the ARTIC 1000 has the ability to handle Platform Man-agement Interface (IPMI) protocol processing directly on the adapter controller option provides “out of band” without impacting the host processor. This is management functions including watchdog accomplished by providing the capability for and reset. Using the latest hot-swap more than 10,000MIPS of processing power technology helps the ARTIC 1000 ensure in a single slot. This processing power is very high-availability for applications with critical useful in applications requiring increased uptime requirements. channel density, higher throughput or complex protocol processing. SOFTWARE SUPPORT FLEXIBILITY A full complement of host operating system ® support is available including Windows NT The ARTIC 1000 accepts flexible network ® 4.0, Windows 2000, Sun Solaris™ for SPARC interface options via two PCI Mezzanine ® ® and Intel platforms and Linux support. Card (PMC) connectors. This approach The ARTIC 1000 uses a STREAMS-compliant allows telecomm manufacturers and OEMs API, which allows SS7, ATM HSL or Frame to standardize on the base I/O processor Relay protocol stacks to run on the adapter. engine, development environment and RTOS. Protocol support capability includes full HSL, OEMs can tailor the ARTIC 1000 to a specific HDLC and Frame Relay. APIs and sample protocol or interface from T1/E1 and V.35 programs provide for monitoring SS7 MTP-2, by changing the PMC. Today’s RadiSys PMC HSL, and GPRS Gb and Gr. offering includes a 4-Port T1/E1/J1 DSP PMC, 4-Port T1/E1/J1 Line PMC, and an 8- Port V.35 PMC. The T1/E1/J1 PMCs support both front and rear I/O and can be installed in pairs to provide up to eight ports of connectivity in a single slot. The 8-port V.35 only supports front I/O. 2 64-bit 60x Bus ARTIC 1000 DATA SHEET (Motorola Power QUICC II) TI MPC8260 SDRAM TMS320C6203 1 bank per DSP 250Mhz DSP MPC8260 32-bit Local Bus 128 MB SDRAM MACH 1 MB FLASH EEPROM H8/3434 Lucent T8105 IPMI Controller H.110 TSI Switch PLX PCI9054 Hot Swap 60x Processor Bus Interface (PB) Power Controller TUNDRA 32-bit Local PCI Bus PowerSpan Primary PCI Bus Interface (P1) Intel 82559 Intel 82559 Fast Ethernet Fast Ethernet PMC1 PMC2 MAC/PHY MAC/PHY J1 J2 J3 J4 J5 CompactPCI (32-Bit) CompactPCI (64-Bit) Rear Panel I/O Access H.110 TDM Bus Rear Panel I/O Access ARTIC 1000 BLOCK DIAGRAM 3 Secondary PCI Bus Interface (P2) SPECIFICATIONS FEATURE FUNCTION DESCRIPTION - 6U CompactPCI (PICMG 2.0) Board Style CPU - Motorola PowerQUICC II, 200MHz Board size Length 233.35mm (9.19”) Width 160mm (6.29”) Depth < 13.71mm (.54”) System Memory SDRAM 32MB - 64-bit access ORDERING INFORMATION EEPROM 1MB Flash Environment Operating temperature 0° to 55° C Call for pricing and availability. Humidity 5 - 95% Refer to the order codes below. +5 V DC .28 A max Power DESCRIPTION: Requirements +3.3 V DC 6.2 A max +12 V DC .006 A max ARTIC 1000 CompactPCI I/O Platform ORDER CODE: IOP-CPCI-10000 -12 V DC .002 A max Protocol Support - SS7 MTP-2, HSL, Frame Relay, monitoring traffic on GPRS Gb, Gr Bundled ARTIC 1000 with PMC and RTM: - SS7 channels - 128* Typical Performance HSL channels - 4 ARTIC 1000 4-Port T1/E1/J1 ORDER CODE: IOP-CPCI-11100 Frame Relay channels - 128* Physical Interfaces - H.110 CT-bus (PICMG 2.5) ARTIC 1000 8-Port T1/E1/J1 PICMG 2.1 ORDER CODE: IOP-1107-V21 PCI 64-bit @ 66MHz PCI Mezzanine Cards 10/100BaseT Ethernet on rear transition module (support front and rear I/O): T1/E1/J1- 8 ports with two PMCs ARTIC 4-Port T1/E1/J1 DSP PMC V.35 - 8 ports ORDER CODE: IOP-PMC-01000 Software Support Host operating system Windows NT® 4.0, Windows® 2000, Sun® Solaris for SPARC and Intel® plat- and device driver forms, Linux ARTIC 4-Port T1/E1/J1 PMC Adapter software STREAMS kernel allows protocol stacks SS7, Frame Relay, ATM and HSL to be ORDER CODE: IOP-PMC-02000 resident on adapter PCI Mezzanine Cards Regulatory Safety UL 1950 3rd Ed., incl. Clause 6 (support front I/O only): Conformance IEC 950 2nd Ed., + A1 - A11 incl. Clause 6 EN 60950: 1992 + A1 - A11 incl. Clause 6 ARTIC 4-Port T1/E1/J1 Front I/O PMC ORDER CODE: IOP-PMC-05000 Printed circuit boards min V-0 Connectors min. V-1 ARTIC 8-Port V.35 Front I/O PMC EMC FCC Part 15 Class A ORDER CODE: IOP-PMC-08000 European EMC Directive Rear Panel Transition Modules (RTM): EN55022: 1994 Class A EN50082: 1997 ARTIC 8-Port T1/E1/J1 / 2-Port Ethernet RTM Telecom Australia & New Zealand 120W ORDER CODE: IOP-RTM-00100 CTR 12 and CTR 13 for 120W CTR Layer 1 Japan to JT-1431-a Industry Canada CS-03 as DS-1 and ISDN FCC Part 68 CSU function & ISDN PRI * Depends on the packet size World Headquarters 5445 NE Dawson Creek Drive Hillsboro, OR 97124 USA ©2004 RadiSys Corporation. RadiSys and EPC are registered trademarks of RadiSys Phone: 503-615-1100 Corporation. All other trademarks are the properties of their respective owners. All Fax: 503-615-1121 specifications within this document are subject to change without notice. 07-1116-04 1204 Toll-Free: 800-950-0044 www.radisys.com info@radisys.com 4
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the IOP-CPCI-10000 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods