RICi-E1, RICi-T1 Fast Ethernet over E1/T1 Intelligent Converters • VLAN stacking transports user traffic transparently, keeping the user LAN settings intact. In addition, the management traffic may be tagged with a different VLAN, fully separating user traffic from management data. • The DHCP client automatically obtains IP address, IP mask and default gateway, minimizing installation time. • The units feature fault propagation. When a TDM link failure is detected RICi-E1 and RICi-T1 shut down the user port. MANAGEMENT • RADview-Lite, RAD’s SNMP-based element management software FEATURES DESCRIPTION provides SNMP traps, status polling, and configuration • Connect Fast Ethernet LANs • RICi-E1 and RICi-T1 are intelligent download. Remote element converters connecting Fast Ethernet over E1 or T1 circuits management is available in LANs over E1 or T1 circuits. They RADview-Lite through ConfiguRAD • Inband and out-of-band enable service providers and ISPs Web-based application, or by management access via: to supply transparent Ethernet Telnet. � services, without interfering with ASCII terminal • The devices are managed inband user traffic. � Web browser from the Fast Ethernet user port or via • RICi-E1 and RICi-T1 have one � the TDM port. Management traffic Telnet E1/T1 port and one 10/100BaseTx and user Ethernet traffic are � SNMP port. Packets are forwarded from transported together on the same � the Ethernet network to the TDM RADview-Lite Ethernet flow, separated by different network at wire speed, fully VLANs, thus ensuring traffic security. • Wire-speed packet utilizing the expensive TDM forwarding DIAGNOSTICS circuit bandwidth. • Remote and local loopbacks are • 4-levels of QoS, based on • The 802.1p priority scheme used for problem isolation at the enables users to define four four VLAN priority queues physical layer. different QoS levels, according to as per 802.1p • A built-in ping utility checks IP the application requirements. • Plug-and-play using DHCP connectivity by pinging remote IP • The Fast Ethernet bridge handles client hosts. 1562-byte frames, supporting • A trace-route application quickly • Fault propagation of E1 or VLAN applications, and other traces a route from RICi-E1 or protocols requiring large frame sizes. T1 error conditions to RICi-T1 to any other network In filter mode, the bridge learns Ethernet port device. MAC addresses and filters local traffic, and in transparent mode it forwards any received packet. RICi-E1, RICi-T1 Fast Ethernet over E1/T1 Intelligent Converters • Line Impedance • Physical SPECIFICATIONS 100Ω, balanced Height: 43.7 mm / 1.7 in Width: 240 mm / 9.4 in E1 INTERFACE • System Clock Depth: 170 mm / 6.7 in • Number of Ports Internal or loopback timing Weight: 0.5 kg / 1.1 lb One • Diagnostics • Compliance Remote and local loopback ORDERING G.703 • Connector • Data Rate RICi-E1/*/& RJ-45 2.048 Mbps Fast Ethernet over E1 intelligent converter WAN PROTOCOL • Line Code RICi-T1/* • Type HDB3, AMI Fast Ethernet over T1 intelligent converter HDLC-like framing (native HDLC • Framing compatible with RAD products) * Specify power supply type: Unframed AC for 100–240 VAC ETHERNET INTERFACE • Max Frame Size 48 for -48 VDC • Type 1800 bytes 10/100 Mbps autonegotiation, & Specify interface type: • Line Impedance full/half duplex, flow control U for unbalanced interface 120Ω, balanced Note: E1 unbalanced option is supported via an • Compliance adapter cable (CBL-RJ45/2BNC/E1, see Supplied • System Clock Conforms to the relevant sections Accessories). Internal or loopback timing of IEEE 802.3 and 802.3u SUPPLIED ACCESSORIES • Diagnostics • Connector Remote and local loopback RJ-45 • AC/DC power cord or adapter plug • Connector GENERAL • CBL-RJ45/2BNC/E1 Interface RJ-45 • Indicators adapter for converting a balanced E1 PWR (green) – Power status T1 INTERFACE RJ-45 connector to a pair of BNC TST (yellow) – Test status • Number of Ports unbalanced coaxial connectors – ALM (red) – Alarm status One supplied when ordering E1 LOS (red) – Loss of signal unbalanced option (E1U) • Compliance ETH LINK (green) – Ethernet link T1.403 status OPTIONAL ACCESSORIES • Data Rate • CBL-DB9F-DB9M-STR • Power 1.544 Mbps AC: 100 to 240 VAC (±10%), Control Port Cable 50 to 60 Hz • Line Code • RM-33 DC: -48 VDC (±10%) B8ZS, AMI Hardware kit for mounting one • Power Consumption • Framing unit in a 19” rack 5W Framed/Unframed • Environment • Max Frame Size data communications Temperature: 0–50°C/32–122°F 1800 bytes Humidity: Up to 90% www.rad.com non–condensing International Headquarters APPLICATION 24 Raoul Wallenberg Street Tel Aviv 69719, Israel Tel: (972) 3-6458181 Fax: (972) 3-6498250, 6474436 Email: market@rad.com U.S. Headquarters 900 Corporate Drive Mahwah, NJ 07430 Tel: (201) 529-1100 Toll free: 1-800-444-7234 Fax: (201) 529-5777 Email: market@radusa.com 385-100-09/05 Figure 1. Providing Transparent LAN Services over Leased Lines  1988–2005 RAD Data Communications Ltd. Specifications are subject to change without prior notice. All other trademarks are the property of their respective holders.