RAD RIC-155GE/48/SC/SM13L/UTP
Specifications
Alarm relay (option)
Connector:DB-9 female; Indicators:Major and Minor Alarm; Dry contact electrical characteristics: 30V/2A
Bridge Table
16,384 MAC addresses with automatic learning and aging
Buffer
3150 frame buffers
Data Rate
1000 Mbps
155 Mbps
Dimensions (HxWxD)
43.7 mm (1.7 in) 1U x 215 mm (8.5 in) x 300 mm (11.8 in)
Duplex Mode
Full duplex
Ethernet Port
Interface:10/100BaseT; Standard:IEEE 802.3; Data rate:10/100 Mbps; Connector:RJ-45 shielded ?? Half/full duplex; Autonegotiation
Ethernet Standards
IEEE 802.3, 802.1Q, and 802.1p
Filtering and Forwarding
Up to 287,000 pps (VLAN unaware); Up to 270,000 pps (VLAN aware)
Framing
STS3C/STM-1
Humidity
Up to 90%, non-condensing
Indicators
PWR (green) - Power ALM (red) - Alarm; MNG LINK (green) - 10/100BaseT Ethernet link integrity; MNG ACT (yellow) - 10/100BaseT Ethernet link activity; DATA LINK (green) - Gigabit Ethernet link integrity; DATA ACT (yellow) - Gigabit Ethernet activity; SYNC (green) - STM-1 port synchronization status
Interface
1000BaseSx (MM85), 1000BaseLx (13L), 1000BaseT
Interface Type, Connector
LC (optical); RJ-45 (electrical)
LAN interfaces
Received valid frames; Transmitted valid frames; Receive FCS errored frames
Maximum Frame Size
1664 bytes
Power
AC:100 to 240 VAC (±10%), 50 to 60 Hz; DC:-48 VDC (±10%)
Power Consumption
20W
SDH/SONET Interface Standards
ANSI T1 646-1995, G.957 (S1.1 or L 1.1)
STM-1/OC-3c interface
Optical input signal; Input signal monitoring based on received B2 error counting; Frame alignment; Alarm indication signal (AIS); Remote detect indication (RDI)
Temperature
Operating:0 to 50°C (32 to 122°F); Storage:-20 to 70°C (-4 to 158°F)
Terminal Port
Interface:RS-232 DCE; Connector:DB-9, female; Format:asynchronous; Baud rate:9.6 to 115.2 kbps
Timing (STM-1/OC-3c interface)
Internal, from internal oscillator; LBT, from received signal
Weight
2.2 kg (4.7 lb)
Datasheet
RIC-155GE-48-SC-SM13L-UTP.pdf
410 KiB
Extracted Text
RIC-155GE Gigabit Ethernet to STM-1/OC-3c Network Termination Unit FEATURES • Bridge supports the • Inband or out-of-band MAC-based forwarding management via: • Connects Gigabit Ethernet (VLAN-unaware) and � ASCII terminal LANs over STM-1/OC-3c VLAN-aware forwarding � Web browser lines modes of operation � Telnet • Gigabit Ethernet user port • Double tagging operation for � RADview-Lite, fault and Fast Ethernet user VLAN transparency, and management application management port full separation of user Gigabit Ethernet traffic and Ethernet • Remote upload and • VLAN support according to management download of application IEEE 802.1Q and 802.1p, software and device allowing traffic separation • Collects Ethernet and configuration files and prioritization STM-1/OC-3c statistics • Compact and easy to install • Optional alarm relay • Physical layer fault propagation RIC-155GE Gigabit Ethernet to STM-1/OC-3c Network Termination Unit DESCRIPTION • Ethernet encapsulation over • Comprehensive diagnostic STM-1/OC-3c is performed by capabilities include: mapping Ethernet frames directly • RIC-155GE Network Terminal unit � Real-time alarms to alert user on over HDLC framing, resulting in (NTU) bridges between Gigabit fault conditions. Alarms are high throughput. Ethernet and STM-1/OC-3c reported to the management SDH/SONET networks. station, recorded in the log file, • Fault propagation of SDH/SONET and simultaneously relayed via a alarms can optionally propagate • Typical applications are: dry contact port and bring down the Gigabit � Transparent LAN services � Ethernet link. GbE link alarms can Ethernet and SDH/SONET link (see Figure 1) optionally propagate and trigger monitoring � Enterprise connection alarms over the SDH/SONET. � Low–cost alternative to • Setup, control, and monitoring SPECIFICATIONS STM-1/OC-3c router interface. performed either inband, within • The RIC-155GE bridge operates in the Ethernet flow, or out-of-band SDH/SONET INTERFACE two forwarding modes: using a dedicated Ethernet port or • Interface Characteristics the terminal control port. � VLAN-unaware MAC address See Table 1. learning • Management options include: • Standards � VLAN-aware mode; Double � ASCII terminal ANSI T1 646-1995 tagging ensures transparency of � Telnet server G.957 (S1.1 or L 1.1) user VLAN and traffic separation � ConfiguRAD via a Web browser between Gigabit Ethernet user • Framing � RADview-Lite SNMP based fault traffic and Fast Ethernet STS3C/STM-1 management service package, management traffic. • Data Rate with ConfiguRAD element • Based on VLAN priority tagging, 155 Mbps manager. four priority queues can be defined • Gigabit Ethernet link available with to prioritize between users or user fiber optic or electrical interfaces. applications. (VLAN-aware mode only). APPLICATION Central Site Remote Site RIC-155GE RIC-155GE Fiber Fiber SDH/SONET STM-1/OC-3c STM-1/OC-3c Data Management ADM ADM IP Network Network Gigabit Ethernet Gigabit Ethernet Management Switch/Router Switch/Router Station Figure 1. Connecting Gigabit Ethernet LANs over STM-1/OC-3c Lines RIC-155GE Gigabit Ethernet to STM-1/OC-3c Network Termination Unit GIGABIT ETHERNET INTERAFCE MANAGEMENT PORTS • Indicators PWR (green) – Power • Standards • Terminal Port ALM (red) – Alarm � IEEE 802.3, 802.1Q, and 802.1p Interface: RS-232 DCE MNG LINK (green) – 10/100BaseT � Connector: DB-9, female • Interface Ethernet link integrity � Format: asynchronous 1000BaseSx (MM85) MNG ACT (yellow) – 10/100BaseT � Baud rate: 9.6 to 115.2 kbps 1000BaseLx (13L) Ethernet link activity 1000BaseT • Ethernet Port DATA LINK (green) – Gigabit � Interface: 10/100BaseT Ethernet link integrity • Data Rate � Standard: IEEE 802.3 DATA ACT (yellow) – Gigabit 1000 Mbps � Data rate: 10/100 Mbps Ethernet activity • Interface Type, Connector � Connector: RJ-45 shielded SYNC (green) – STM-1 port LC (optical) � Half/full duplex synchronization status RJ-45 (electrical) � Autonegotiation • Power • Duplex Mode GENERAL AC: 100 to 240 VAC (±10%), Full duplex 50 to 60 Hz • Monitoring DC: -48 VDC (±10%) BRIDGE STM-1/OC-3c interface: � Optical input signal • Power Consumption • Bridge Table � Input signal monitoring based on 20W 16,384 MAC addresses with received B2 error counting automatic learning and aging � Frame alignment • Physical � Alarm indication signal (AIS) Height: 43.7 mm (1.7 in) 1U • Filtering and Forwarding � Remote detect indication (RDI) Width: 215 mm (8.5 in) Up to 287,000 pps (VLAN unaware) LAN interfaces: Depth: 300 mm (11.8 in) Up to 270,000 pps (VLAN aware) � Received valid frames Weight 2.2 kg (4.7 lb) • Buffer � Transmitted valid frames • Environment 3150 frame buffers � Receive FCS errored frames Temperature: • Timing (STM-1/OC-3c interface) • Maximum Frame Size Operating: 0 to 50°C (32 to 122°F) � Internal, from internal oscillator 1664 bytes Storage: -20 to 70°C (-4 to 158°F) � LBT, from received signal Humidity: Up to 90%, • Alarm relay (option) non-condensing � Connector: DB-9 female � Indicators: Major and Minor Alarm � Dry contact electrical characteristics: 30V/2A Table 1. Interface Characteristics Option Wavelength Fiber Type Standard Transmitter Input Output Connector Typical Range Type Range Power [dBm] [dBm] [nm] [µm] (min)(max) (min)(max) [km] [miles] STM-1/OC-3c Fiber Optic 13 1310 62.5/125 multimode ANSI T1 LED SC 2.3 1.4 −31 −14 −19 −14 646-1995 13L 1310 9/125 single mode G.957 S1.1 Laser (short haul) SC 15 9.4 −28 −8 −15 −8 13LH 1310 9/125 single mode G.957 L1.1 Laser (long haul) 0 SC 40 25 −34 −10 −5 Gigabit Ethernet Fiber Optic 85 850 62.5/125 multimode IEEE 802.3 SX Laser 0 0 LC 270m 1000 ft −17 −9.5 13L 1310 9/125 single mode IEEE 802.3 LX Laser −19 −3 −11 −3 LC 5 3.1 15L 1550 9/125 single mode Laser (long haul) −22 −3 −5 3 LC (SFF) 40 25 Gigabit Ethernet Copper 1000BaseT — Cat. 5 IEEE 802.3 — RJ-45 100m 330 ft (UTP) ORDERING SUPPLIED ACCESORIES RIC-155GE/*/%/$/&/^ Gigabit Ethernet to STM-1/OC-3c Power cord for AC option Converter AC/DC adapter for DC option * Specify power supply type: AC for 100–240 VAC OPTIONAL ACCESORIES DC for -48 VDC RM-35/@ % Specify STM-1/OC-3c connector Hardware kit for mounting one or type: two RIC-155GE units in a 19” rack. SC for fiber optic SC connector @ Specify rack mounting kit type: $ Specify STM-1/OC-3c optical P1 for mounting one unit wavelength: P2 for mounting two units 13 for 1310 nm multimode WM-35 13L for 1310 nm single mode S1.1 Hardware kit for mounting one 13LH for 1310 nm single mode L1.1 RIC-155GE unit on a wall. & Specify Gigabit Ethernet port type: 85 for 850 nm multimode, LC connector 13L for 1310 nm single mode, LC connector 15L for 1550 nm single mode, LC connector UTP for 1000BaseT, RJ-45 connector ^ Specify ALM for Alarm Relay RIC-155GE Gigabit Ethernet to STM-1/OC-3c Network Termination Unit data communications rad.industrialpartner.com VoxTechnologies (Distributor) 301 S Sherman Street Richardson, Texas 75081 Tel: (972) 234-4343 Fax: (972) 234-4295 Email:sales@voxtechnologies.com 1991–2006 RAD Data Communications Ltd. Specifications are subject to change without prior notice. All other trademarks are the property of their respective holders.
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the RIC-155GE/48/SC/SM13L/UTP have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods