TM BL2500 Coyote Ethernet-Enabled Single-Board Computer OEM Volume Version $69* w/o Ethernet The BL2500 Coyote single-board computer gives OEM designers extremely low-cost embedded control for high-volume applications such as product control, factory equipment control, access control, HVAC, and vending machines. Two standard models—one with Ethernet, one without—feature the Rabbit 3000™ microprocessor at 29.4 MHz, with 256K Flash and 128K SRAM (standard). Customized BL2500 models (OEM2500 versions) can be manufactured to user-specified configurations in volumes > 500. Customization helps OEMs realize an extremely low-cost, yet maintain a reliable and rugged industrial solution. Our pin-compatible RabbitCore modules provide multiple configurations on the BL2500 Coyote, including Ethernet, non-Ethernet, and memory options. On-Board Features The Coyote's compact board size of 3.95" × 3.95" (100 × 100 mm) is easily mountable in standard 100 mm DIN rail trays. External ® connections via polarized locking industry-standard Molex -type connectors enable rapid assembly with wire harnesses. These connectors also provide dependable cable harness connectivity to I/O. Future expansion boards (including A/D, D/A, digital I/O, and keypad/display) will interface via the two multiplexed SPI RS-422 ports. The Coyote provides 24 rugged digital I/O (plus 1 A/D input and 2 D/A outputs) along with 4 LEDs (3 yellow and 1 extra bright red). The 8 industrialized open-collector sinking outputs can easily switch up to 200 mA of inductive loads such as relays and solenoids with protection from inductive kickback. Of the 16 digital inputs, 15 are fully protected to ±36 V. Six serial ports are included to support external communication. Two ports are connected to standard full-duplex RS-232 circuitry. One port is connected to rugged RS-485 differential pair signaling circuitry—allowing for industry standard multi-drop RS-485 networks. One port, designed to allow serial expansion, is multiplexed through two very high-speed (>1Mbit/sec capability) SPI ports with each line going through RS-422 differential pair signaling. The SPI ports connect to RJ-45 connectors (accepting standard category 5 cabling) for ease of connectivity. One serial port is a 3.3 V CMOS-level port that can either be asynchronous or clocked and one CMOS-compatible serial port is dedicated to programming/debugging. The optional Ethernet interface (10 Mbps or 10/100 Mbps) allows easy connection to local networks or the Internet. Powerful software allows TCP/IP communication including e-mail and serving of web pages. Remote program development and loading via a network or the Internet is supported using appropriate accessory hardware. Programming the Coyote Programs are developed and debugged using Z-World’s ® industry-proven Dynamic C software, which runs on a Windows PC. Interfacing from the PC hosting Dynamic C to the target BL2500 board can be accomplished by a serial cable, a USB cable, or via Ethernet. Comprehensive debugging support includes break points, watch expressions and many other extensive features oriented toward real-time embedded systems programming. An extensive library of drivers and sample programs is provided, including a royalty-free TCP/IP stack for network and Internet communications. Full source code is provided for most library routines. BL2500 4/20/2005 Pin-compatible Core Modules: RCM3000, RCM3010, RCM3100, BL2500 Features RCM3110, RCM3200 ™ • Rabbit 3000 processor core modules • With or without 10Base-T Ethernet • Molex-type connectors for industry standard wire harness connectivity • 16 digital inputs • 8 digital high-current sinking outputs with Rugged industry rugged protection diodes standard Molex® type connectors • Two 9-bit PWM analog output channels • One 8-bit A/D analog input channel Serial Expansion ports for connectivity • 6 serial ports (2 RS-232, RS-485, RS-422, Backup Battery for to peripheral boards 2 CMOS) RTC and SRAM • 4 user-configurable LEDs • 1000 mA⋅h backup battery for RTC (time/date clock) and SRAM *Example - OEM2510: RCM3110 (non-Ethernet Core), • Standard options: remove 8 inputs, remove backup battery, and remove serial expansion SPI RS-422 ports = $69 each (qty. 500) • 10/100Base-T Ethernet • Higher Memory Versions OEM2500 Options (Available for quantities > 500) • A variety of core modules with or without Ethernet—10Base-T or 10/100Base-T • Higher memory versions • Addition/removal of any or all of the following sub circuits for performance/lower cost: **Example - OEM2500: RCM3010 (10Base-T Ethernet • 2 serial expansion SPI RS-422 ports Core), remove 8 inputs, remove backup battery, and • Battery remove serial expansion SPI RS-422 ports = $99 each (qty. 500) • RS-485 • RS-232 • 16 inputs • 8 outputs • 2 D/A + 1 A/D • 4 LEDs • User Specified Options: Contact Sales Representative Development Kit The BL2500/OEM2500 Development Kit contains all the software and hardware tools needed to begin design, including BL2500 model, demonstration board, Dynamic C SE development software and documentation on CD-ROM, User’s Manual with schematics, ® serial cable for programming and debugging, AC adapter (US/Canada only), and Molex -style crimp pins & housings (standard crimping tool sold separately). Dynamic C is a registered trademark of Z-World, Inc. Rabbit & Rabbit 3000 are trademarks of Rabbit Semiconductor, Inc. Molex is a registered trademark of Molex, Inc. 4/20/2005 BL2500 Specifications & Features FEATURE BL2500 BL2510 OEM2500** OEM2510* Microprocessor Rabbit 3000 at 29.4 MHz 10Base-T, RJ-45 10Base-T, RJ-45 Ethernet Port None None (standard) (standard) Flash Memory 256K (standard) SRAM 128K (standard) LEDs 4, user-programmable 16: 15 protected to ±36 V DC, 1 protected to +5 –36V; 8 protected to ±36 V DC, threshold is 1.5 V nom. Digital Inputs threshold is 1.5 V nom. Digital Outputs 8, sink up to 200 mA each, 36 V DC max. standoff voltage Analog Inputs One 10-bit resolution, 8-bit accuracy, input range 0.1–3.1 V, 10 samples/s Analog Outputs Two 9-bit PWM, 0.1–3.1 V DC, 17ms settling time 6 serial ports: 5 serial ports: • 1 RS-485 • 1 RS-485 • 2 RS-232 or one RS-232 (with CTS/RTS) • 2 RS-232 or one RS-232 (with CTS/RTS) • 1 CMOS level asynchronous or clocked serial port • 1 CMOS level asynchronous or clocked serial port Serial Ports • 1 expansion serial port multiplexed to two RS-422 • 1 CMOS compatible serial port for clocked SPI ports programming/debug • 1 CMOS compatible serial port for programming/debug Serial Rate Max. async = CLK/8, Max. sync = CLK/2 Real-Time Clock Yes Timers Ten 8-bit timers (6 cascadable from the first) and one 10-bit timer with 2 match registers Watchdog/Supervisor Yes 8 – 40 V DC 8 – 40 V DC 8 – 40 V DC 8 – 40 V DC Power 1 W typical w/ no load 0.8 W typical w/ no load 1 W typical w/ no load 0.8 W typical w/ no load 3 V lithium coin-type, 1000 mA⋅h, supports RTC & Backup Battery None SRAM Operating Temperature –40° to +70°C Humidity 5 – 95%, noncondensing ® ® 5 polarized 9-pin Molex -type terminals with 0.1" pitch, 4 polarized 9-pin Molex type terminals with 0.1" pitch, - Two 4-pin 0.156” pitch Molex-type, two 0.156” pitch 2- two 0.156” pitch 2-pin Molex type, one .1” pitch 2x5 Connectors - IDC, one 2 mm pitch 2x5 IDC programming port pin Molex type, two RJ-45, one 0.1” pitch 2x5 IDC, one 2 mm pitch 2x5 IDC programming port 3.94" × 3.94" × 1.16" (100 3.94" × 3.94" × 0.80" (100 3.94" × 3.94" × 1.16" (100 3.94" × 3.94" × 0.80" (100 Board Size × 100 × 29 mm) × 100 × 20 mm) × 100 × 29 mm) × 100 × 20 mm) Pricing $189/155 (qty. 1/100) $149/122 (qty. 1/100) **$99/94 (qty. 500/1000) *$69/64 (qty. 500/1000) 101-0575 101-0576 101-0605 101-0606 Part Number Development Kit $299 Part Number U.S. 101-0577 Int’l 101-0578 Options BL2500 BL2510 OEM2500 OEM2510 Standard Options Pricing (qty. Pricing (qty. Pricing (qty. Pricing (qty. 1/100) 1/100) 500/1000) 500/1000) BL25XX with: 10/100Base-T, 512K Flash, 512K SRAM (program) + 256K SRAM (data), $239/195 N/A $145/135 N/A ™ Rabbit 3000 @ 44.2 MHz Part Number 101-0602 101-0609 BL25XX with: $209/171 $179/147 $129/119 $99/89 512K Flash / 512K SRAM Part Number 101-0599 101-0600 101-0607 101-0608 User-Specified Options N/A Contact Sales Representative 4/20/2005 OEM2500 Customization Checklist Complete form and fax for custom quote or complete online at: www.zworld.com/products/oem2500/custom.shtml FEATURE Ethernet/Memory 10/100Base-T (44.2 MHz clock, 10Base-T, 512K Flash / 512K 10Base-T, 256K Flash / 128K 512K Flash, 512K program + SRAM SRAM (80) (40) 256K data SRAM) (100) No Ethernet, 512K Flash / 512K No Ethernet, 256K Flash / 128K SRAM SRAM (40) Serial Ports: RS-485 No Yes (5) RS-232 Yes No (5) Digital Inputs No Inputs 16 (15 protected) 8 (8 protected) (8) (4) Digital Outputs No Outputs 8 Outputs (6) Analog I/O No Analog I/O 1 Input / 2 Outputs (3) Expansion RabbitNet™ expansion port No RabbitNet multiplexed to 2 RS-422 clocked SPI ports (10) Backup Battery (1000 mA⋅h) No Yes (8) LEDs No LEDs 4 LEDs (1) Quantity Required 500 - 999 1000 - 4999 5000 + Other User Specification: In the checklist above, the numbers in parentheses denote the relative worth of the circuits listed. This will aid a designer in judging which circuits to use for an OEM version. Example: LEDs are given the lowest relative value = 1. Actual OEM prices will vary depending upon the particular combination of circuits and also upon the volume. Contact a sales representative for actual price quote and lead time. Name: Company: Address: City: State: Country: Zip/Postal Code: Phone Number: Fax Number: Email: Fax completed form to Z-World Sales at 530.757.3792 4/20/2005 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Rabbit Semiconductor :   20-101-0599