High Speed • High Accuracy Eddy Current Type Digital Displacement Sensor GP-X SERIES Conforming to EMC Directive 25!s & 0.02%F.S. High-speed sampling and high resolution. The new choice for even more variegated data collection and processing. The unique sensing technology developed by our SUNX team has made possible an ultra-high speed minute displacement measurement function, essential for high-precision processes, that boasts the highest resolution in the industry. We’ve realized a 25 ¨s (40,000 They perform with a �0.3 %F.S. times / sec.) ultra high sampling speed linearity for stainless steel and iron With a 25 !s ultra high sampling speed, the GP-X series won’t miss Because they perform with a �0.3 % F.S. linearity, they can be used for even high speed work displacements. sensing stainless steel and iron enabling precise measurements not affected by the work’s material. Specifications corresponding to each material (stainless steel, iron, aluminum) has already been inputted in the controller enabling the These devices boast a 0.07 % F.S. / �C easy selection of the setting that is most suitable for the particular material used. temperature characteristics Optimal correction of the output feature By combining the sensor head with the controller, we’ve realized Aluminum Stainless steel 0.07 % F.S. / �C. They are highly resistant to ambient temperature changes enabling stable micro-displacement measurements. They possess a 0.02 % F.S. resolution Iron for highly accurate measurement With the industry’s highest resolution, 0.02 % F.S. (Note), they can perform high-accuracy measurements of micro-displacements. (Average number of samples: 64) Distance Distance Note: GP-XC3SE and GP-XC5SE Resolution: 0.04 %F.S. Before correction After correction 1 Output value Output value A total of 6 types of sensor head 6 types of sensor heads from the ultra compact "3.8 mm "0.150 in cylindrical type to the long range sensing "22 mm "0.866 in / M12 screw type are available. GP-X22KL Sensing range : 0 to 10 mm 0 to 0.394 in Appearance : "22 mm / M12 "0.866 in Controller GP-X12ML Sensing range : 0 to 5 mm NPN output type , PNP output type 0 to 0.197 in DIN � 48 mm 1.890 in size Appearance : M12 GP-X10M GP-X3SE GP-X5SE GP-X8S Sensing range : 0 to 2 mm Sensing range : 0 to 0.8 mm Sensing range : 0 to 1 mm Sensing range : 0 to 2 mm 0 to 0.079 in 0 to 0.031 in 0 to 0.039 in 0 to 0.079 in Appearance : M10 Appearance : "3.8 mm Appearance : "5.4 mm Appearance : "8 mm "0.150 in "0.213 in "0.315 in Sensor heads with superior workability and maintainability Replacement of sensor heads possible One-touch connector hook up Sensor head extensions possible Between the sensor head and the As a result of damage or other mishap The sensor head and the controller connection controller, a GP-XCCJ7 extension cable rendering maintenance necessary, you is a simple one-touch connector type. (optional) can be used up to a 10 m can replace only the sensor head leaving 32.808 ft total length. the controller as it is. One-touch connector Sensor head Extension Cable GP-XCCJ7 : 7 m 22.966 ft Total length : 10 m 32.808 ft Sensor cable : 3 m 9.843 ft 2 The SUNX sensor design policy has realized controllers that are easy to use on-site. Panel mounting type Controller Compact type DIN � 48 mm 1.890 in size Out of setting range (upper threshold) Sensing values within setting range Out of setting range (lower threshold) The 5-digit, dual, 2-color digital display offers great visibility If the measurement results fall within the setting range (GO), they will appear on the Sensing values lower digital display in green. If they are out of range (HI, LO), they will be displayed in the upper digital in orange. The display Setting value verifiable Simple setting mode Upper threshold value position and color change allows for Manual mode even in sensing mode accurate visibility even for momentary changes. Digital input display enabling easy setting Its dual digital display enables numerical setting while verifying setting items for each Average number of Lower threshold value mode. Even when sensing, it enables the samples setting value verification of the main settings. 3 Various functions made available through the use of RS-232C standard interfaces. Exclusive RS-232C cable (Accessory for the intelligent monitor GP-XAiM) Cable length : 3 m 9.843 ft [PC side connector : D-SUB (9 pins)] Link cable for controller communication unit (optional) SL-F� Cable length : 150 mm 5.906 in, 250 mm 9.843 in, 1,000 mm 39.370 in Controller communication unit GP-XCOM The RS-232C communication connector is standard equipment It is capable of various controls such as saving measurement data to PC and the controller’s inputted settings and loading stored memory. Connector for RS-232C communication 5 Intelligent monitor (GP-XAiM) optimal for collecting and analyzing measurement data. (Exclusive RC-232C cable is attached) An intelligent monitor capable of the settings for each measurement conditions and waveform display monitoring. It can perform waveform monitoring, which could until now only be done by the oscilloscope, as well as the simple loading and saving onto a PC of settings for each condition and function. Enables sensors data comparisons Sensor A and sensor B Sensor B Sensor A and calculations can be linked together and measurement can 3-value judgment output for calculating measurement data be calculated (a – b) to conformity and calculation results between 2 interconnected detect difference in controllers is rendered possible. The calculation function equipment object. renders digital panel controllers unnecessary. (a – b) b a Datalink between sensors possible The controller communication unit GP-XCOM (optional) can be object (a – b) : difference in object linked to up to 8 controllers and load via just one RS-232C cable each controller settings and measurement data to a PC. Maximum of eight controllers Data sent to Controller communication unit a PC via the Link cable RS-232C 6 GP-X ORDER GUIDE Appearance (mm in) Set Model No. Type Sensing range Comparative output (Sensor head model No.) Sensor heads Controller GP-XC3SE NPN open-collector "3.8 "0.150 transistor (GP-X3SE) (Note) 0 to 0.8 mm 0 to 0.031 in GP-XC3SE-P PNP open-collector 17 0.669 transistor (GP-X3SE) (Note) GP-XC5SE NPN open-collector "5.4 "0.213 transistor (GP-X5SE) (Note) 0 to 1 mm 0 to 0.039 in GP-XC5SE-P PNP open-collector 17 transistor 0.669 (GP-X5SE) (Note) GP-XC8S NPN open-collector 83 transistor (GP-X8S) 0 to 2 mm 3.268 0 to 0.079 in "8 GP-XC8S-P PNP open-collector 17 "0.315 transistor (GP-X8S) 0.669 48 1.890 GP-XC10M NPN open-collector transistor (GP-X10M) 0 to 2 mm 0 to 0.079 in 48 M10 GP-XC10M-P PNP open-collector 1.890 17 transistor (GP-X10M) 0.669 GP-XC12ML NPN open-collector transistor (GP-X12ML) 0 to 5 mm 0 to 0.197 in GP-XC12ML-P M12 PNP open-collector 21 transistor 0.827 (GP-X12ML) GP-XC22KL NPN open-collector transistor (GP-X22KL) 0 to 10 mm M12 0 to 0.394 in GP-XC22KL-P PNP open-collector "22 35 0.866 transistor (GP-X22KL) 1.378 Note: High resolution types (GP-XC3S, GP-XC5S: 0.02 % F.S., average number of samples: 64) are available. These products correspond to the Export Trade Administration Act of Japan. Shipping them outside Japan requires special permission from the Japanese government regarding stipulations in Foreign Exchange and Foreign Trade Law. Please contact our office for details. OPTIONS Designation Model No. Description This unit outputs measurement values in BCD data format at a high speed. BCD output unit GP-XBCD • Sampling frequency : 20 kHz Cable with connector Cable for BCD data output unit. on one end for GP-XBCC3 Length: 3 m 9.843 ft • 26-core cable with connector on one end BCD output unit Controller Up to 8 controllers can be linked. GP-XCOM communication unit Length: 150 mm 5.906 in SL-F150 Link cable for This cable links the controller communication controller Length: 250 mm 9.843 in SL-F250 units. Select as per the cable length. communication unit Length: 1,000 mm 39.370 in SL-F1000 Monitoring settings for each measurement condition and measurement Intelligent monitor GP-XAiM waveforms is enabled by way of a PC. • One exclusive RS-232C cable (3 m 9.843 ft length) is attached. Extension cable for This cable with connector is for extensions Length: 7 m 22.966 ft GP-XCCJ7 between the sensor head and controller. sensor head Extension cable for BCD output unit Controller communication unit Intelligent monitor sensor head Cable with connector on Link cable for controller • GP-XAiM • GP-XCCJ7 one end for BCD communication output unit unit Controller BCD output unit communication unit GP-XBCD GP-XCOM Link cable for controller Cable with connector on one end communication unit for BCD output unit GP-XBCC3 SL-F� 7 Threaded type sensor head Non-threaded type sensor head GP-X SPECIFICATIONS Sensor heads Non-threaded type Threaded type Type For 0.8 mm 0.031 in sensing For 1 mm 0.039 in sensing For 2 mm 0.079 in sensing For 2 mm 0.079 in sensing For 5 mm 0.197 in sensing For 10 mm 0.394 in sensing Item Model No. GP-X3SE GP-X5SE GP-X8S GP-X10M GP-X12ML GP-X22KL Sensing range (Note 1) 0 to 0.8 mm 0 to 0.031 in 0 to 1 mm 0 to 0.039 in 0 to 2 mm 0 to 0.079 in 0 to 2 mm 0 to 0.079 in 0 to 5 mm 0 to 0.197 in 0 to 10 mm 0 to 0.394 in Standard sensing object Stainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60�60�t 1 mm 2.362�2.362�t 0.039 in Temperature characteristics (Note 2) 0.07 % F.S./�C or less Pollution degree 3 (Industrial environment) Protection IP67 (IEC), IP67g (JEM) Ambient temperature �10 to�55 �C �14 to�131 �F, Storage: �20 to�70 �C �4 to�158 �F Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Voltage withstandability 250 V AC for one min. between all supply terminals connected together and enclosure Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each 2 Shock resistance 500 m/s acceleration (50 G approx.) in X, Y and Z directions for five times each Enclosure Stainless steel (SUS303) Brass (Nickel plated) Cable protector PP Sensing Part ABS PAR ABS PA Cable High frequency coaxial cable with connector, 3 m 9.843 ft long (Note 3) Extension up to total 10 m 32.808 ft is possible with the optional cable Cable extension Weight (Note 4) 40 g approx. 40 g approx. 40 g approx. 50 g approx. 45 g approx. 80 g approx. Accessories Nut: 2 pcs., Toothed lock washer: 1 pc. Notes: 1) The sensing range is specified for the standard sensing object. 2) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller. 3) For the flexible cable type, please contact our office. 4) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer. 8 Material Environmental resistance GP-X SPECIFICATIONS Controllers Type NPN output PNP output Item Set model No. GP-XC� GP-XC�-P Supply voltage 24 V DC �10 % Ripple P-P 10 % or less Current consumption 150 mA or less GP-XC3SE / GP-XC5SE: 0.04 % F.S. (64 times average processing) Resolution (Note 1) GP-XC8S / GP-XC10M / GP-XC12ML / GP-XC22KL: 0.02 % F.S. (64 times average processing) Sampling frequency 40 kHz (25 !s) Linearity (Note 1) Within �0.3 % F.S. Temperature characteristics (Note 2) 0.07 % F.S./�C or less Analog voltage output Output voltage: �5 to �5 V (Note 3), Output impedance: 100 Ω approx. Response time 75 !s (maximum speed) NPN open-collector transistor PNP open-collector transistor • Maximum sink current: 100 mA • Maximum source current: 100 mA Comparative outputs • Applied voltage: 30 V DC or less (between comparative output and 0 V) • Applied voltage: 30 V DC or less (between comparative output and �V) (HI, GO, LO) • Residual voltage: 1.6 V or less (at 100 mA sink current) • Residual voltage: 1.6 V or less (at 100 mA source current) 0.4 V or less (at 16 mA sink current) 0.4 V or less (at 16 mA source current) Utilization category DC-12 or DC-13 Output number HI / GO / LO 3 value output HI : ON when measured value � the upper limit value Output operation GO: ON when upper limit value j measured value j lower limit value LO : ON when lower limit value � measured value Short-circuit protection Incorporated Photocoupler input Photocoupler input • Input current: 9 mA or less • Input current: 9 mA or less External input • Operating voltage: ON voltage 17 V or more (between �24 V and input) • Operating voltage: ON voltage 17 V or more (between 0 V and input) OFF voltage 4 V or less (between �24 V and input) OFF voltage 4 V or less (between 0 V and input) • Input impedance: 5 kΩ approx. • Input impedance: 5 kΩ approx. Serial I/O RS-232C Zero-set setting method Push button setting / External input setting MODE Orange LED (lights up when in mode status) HI Orange LED (lights up when the upper limit value is exceeded) GO Green LED (lights up when within the upper and lower limit values) LO Orange LED (lights up when less than the lower limit value) TIMING Green LED (lights up as per the external or internal trigger timing) Upper line digital display part 5 digit orange LED (display of numerical values out of upper and lower limit values) Lower line digital display part 5 digit green LED (display of numerical values within the upper and lower limit values) Pollution degree 3 (Industrial environment) Ambient temperature 0 to�50 �C �32 to �122 �F (No dew condensation), Storage: 0 to�50 �C �32 to �122 �F Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH EMC EN 61000-6-2, EN 61000-6-4 Vibration resistance 10 to 55 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each 2 Shock resistance 100 m/s acceleration (10 G approx.) in X, Y and Z directions for five times each Material Enclosure: Polycarbonate Weight 120 g approx. Accessory ATA4811 (controller mounting frame): 1 set Notes: 1) This value is obtained at a constant �25 �C �77 �F. 2) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller. 3) Adjusted to a 0 to �5 V factory setting. BCD output unit Controller communication unit Model No. GP-XCOM Model No. GP-XBCD Current consumption 20 mA or less Current consumption 5 mA or less N-channel MOSFET open drain Output Material Enclosure: ABS • Maximum sink current: 50 mA 5 digits BCD, • Applied voltage: 30 V DC or less (between output and GND) Weight 20 g approx. Polarity indication, () • Residual voltage: 1 V or less (at 50 mA sink current) VALID Accessory Mounting bracket [Stainless steel (SUS304)]: 1 pc. Non-voltage contact or NPN open-collector transistor input Hold input • Low: 0 to 1 V • High: Open Note: Each GP-XCOM is connected using a link cable for controller com- munication units (SL-F�, optional). Material Enclosure: ABS When GP-XCOM is used, controllers cannot communicate if their Weight software versions are not compatible (Ver. 1.06 or earlier version with 30 g approx. Ver 2.00 or later version). Accessory Mounting bracket [Stainless steel (SUS304)]: 1 pc. Check the software version and use the correct combination. Note: Connects to the control device with GP-XBCC3 cable with connector on one end for BCD output unit (3 m 9.843 ft cable length, optional). 9 Environmental resistance Indicators GP-X I/O CIRCUIT AND WIRING DIAGRAMS NPN output PNP output type controller type controller I/O circuit diagram I/O circuit diagram Terminal No. Terminal No. D1 D1 �V �V 18 18 Comparative Load ZD1 output LO 1 4 Output COM. Tr1 Load 100mA max. Comparative 100mA max. ZD2 Tr1 2 output GO 1 Tr2 Load ZD1 Comparative output LO 100mA max. ZD3 Comparative output HI 100mA max. Load Tr2 3 2 � � Tr3 24 V DC 24V DC ZD2 Comparative output GO 100mA max. Load ZD4 Alarm output 100mA max. Load �10 % �10% Tr3 5 � 3 � Tr4 ZD3 Comparative output HI Load 100mA max. 100mA max. ZD5 Strobe output Tr4 6 5 Tr5 Load 100 mA max. ZD4 Alarm output 100mA max. ZD6 Interference Used for interference Tr5 Load 7 6 Tr6 prevention output Strobe output prevention function. ZD5 Load 4 Interference prevention output Output COM. 0 V Used for interference Tr6 17 7 prevention function. ZD6 47 Ω 47 Ω � 17 9 Analog voltage output (�5 to �5 V) (Note) � 0 V 8 For analog output GND 47 Ω 47 Ω � 9 Analog voltage output (�5 to �5 V) (Note) � �24 V 8 For analog output GND 5 kΩ Zero-set input Input COM. (�24 V) 13 10 m1 m1 m1 m2 m1 �24 V 5 kΩ Memory selection input 1 11 5 kΩ Zero-set input 10 �24 V 5 kΩ Memory selection input 2 12 5 kΩ Memory selection input 1 11 �24 V 5 kΩ Timing input 5 kΩ Memory selection input 2 14 12 �24 V 5 kΩ Timing input 14 5 kΩ Reset input 15 5 kΩ Reset input �24 V Interference prevention input 15 5 kΩ Used for interference 16 m1 m2 m1 m1 m1 prevention function. 5 kΩ Interference Used for interference 16 prevention function. prevention input Input COM. 13 (0 V) Internal circuit Users’ circuit Internal circuit Users’ circuit Note: Devices connected to the analog voltage output must have an input Note: Devices connected to the analog voltage output must have an input impedance set at 1 MΩ or more. impedance set at 1 MΩ or more. Symbols D1: Reverse supply polarity protection diode Symbols D1: Reverse supply polarity protection diode ��� ��� ZD1 to ZD6: Surge absorption zener diode ZD1 to ZD6: Surge absorption zener diode Tr1 to Tr6: NPN output transistor Tr1 to Tr6: PNP output transistor m1 m1 Non-voltage contact or NPN open-collector transistor Non-voltage contact or PNP open-collector transistor or or • Zero-set input, reset input, memory selection input • Zero-set input, reset input, memory selection input Low (0 to 4 V) : Effective Low (0 V or open) : Ineffective High (�V or open) : Ineffective High (�17 V to�24 V) : Effective m2 m2 NPN open-collector transistor PNP open-collector transistor • Timing input • Timing input Low (0 to 4 V): Effective Low (0 V or open): Ineffective High (�V or open): Ineffective High (�17 to �24 V): Effective Memory selection input Memory selection input Memory No. Memory selection 1 Memory selection 2 Memory No. Memory selection 1 Memory selection 2 0 High High 0 Low Low 1 Low High 1 High Low 2 High Low 2 Low High 3 Low Low 3 High High 10 Main circuit Main circuit 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 GP-X I/O CIRCUIT AND WIRING DIAGRAMS Controller Terminal arrangement 123456789 0ABCDEFGH Connector for RS-232C communication Connector for sensor head connection Terminal No. Description Terminal No. Description 1 Comparative output LO 0 Zero-set input 2 A Comparative output GO Memory selection input 1 3 Comparative output HI B Memory selection input 2 4 C Output COM. Input COM. 5D Alarm output Timing input 6 E Strobe output Reset input 7 Interference prevention output F Interference prevention input 8 G For analog output GND 0 V 9 Analog output H �V BCD output unit Connector pin position and cable color Connector Cable Signal Description pin No. Sheath color ID mark 1 Orange Red: 1 A0 1� 2 Orange Black: 1 B0 2� Measurement value 0 3 C0 to the 10 digit Gray Red: 1 4� 4 Gray Black: 1 D0 8� 5 White A1 Red: 1 1� 6 White Black: 1 B1 2� Measurement value 1 7 Yellow Red: 1 C1 4� to the 10 digit 8 Yellow Black: 1 D1 8� Connector for controller connection 9 Pink Red: 1 A2 1� 0 Pink Black: 1 B2 2� Measurement value Measurement value 2 A Orange Red: 2 C2 4� to the 10 digit BCD output B D2 Orange Black: 2 8� C Gray Red: 2 A3 1� D Gray B3 Black: 2 2� Measurement value 3 E White Red: 2 C3 4� to the 10 digit Connector for BCD output F White D3 8� Black: 2 G A4 Yellow Red: 2 1� H Yellow Black: 2 B4 2� Measurement value 4 I C4 to the 10 digit Pink Red: 2 4� J Pink Black: 2 D4 8� K Polarity signal output High (OFF): �, Low (ON): � Orange Red: 3 POLE Low (ON) when the L Orange Black: 3 VALID output VALID data output is enabled This input is to maintain the external M Gray Red: 3 HOLD Hold input data output. The data output is maintained during low (ON). N Gray Ground Black: 3 GND O White Red: 3 GND Ground White Black: 3 Not connected Not used Note: The shield wire is connected externally at 0 V. 11 GP-X PRECAUTIONS FOR PROPER USE Mounting with nut This product is not a safety sensor. Its use is not intended or designed to protect life and prevent body injury or property damage from dangerous parts of Attached toothed Attached toothed Attached toothed machinery. It is a normal object detection sensor. lock washer lock washer lock washer B B B • The sensor head and the controller are adjusted in order to conform to the default specification linearity. Mounting plate Mounting plate Mounting plate • In the event of replacing sensor heads, input the sensor head’s characteristic code and conduct 3-point correction (calibration). Model No. B (mm in) Tightening torque • Should you use an extension cable, turn the sensor head cable 7 0.276 or more 9.8 N�m or less GP-X10M length selection switch located on the back of the controller to 14 0.551 or more 20 N�m or less ‘3 m + 7 m 9.843 ft + 22.966 ft’. Then reintroduce the power GP-X12ML supply and conduct 3-point correction (calibration). GP-X22KL 20 0.787 or more (Note 1) 20 N�m or less Notes: 1) Without nut. If a nut is installed, the dimension Conditions in use for CE conformity will be 23.5 mm or more. 2) Mount such that the nuts do not protrude from This sensor is a CE conformity product complying with EMC • the threaded portion. Directive. The harmonized standard with regard to immunity that applies to this product is EN 61000-6-2 and the following conditions must be met to conform to that standard. Distance from surrounding metal Conditions • As metal around the sensor may affect the sensing performance, • The controller should be connected less than 10 m 32.808 ft from pay attention to the following points. the power supply. • The signal line to connect with the controller should be less than 30 m 98.425 ft. • Since the analog output may change if the sensor head is completely embedded in metal, keep the minimum distance • A ferrite clamp must be mounted within 10 mm 0.394 in from specified in the table below. connector fitted onto the GP-XBCC3 cable with connector on one end for BCD output units. Sensor head C (mm in) D (mm in) The EN 50082-2 that previously applied to the products for conforming to C GP-X3SE EMC Directive was replaced by EN 61000-6-2 starting April 1st. 2002. D "10 "0.394 Metal GP-X5SE 3 0.118 Linearity in case of disc-shaped or cylindrical objects GP-X8S "18 "0.709 • In case the sensing object is disc-shaped or cylindrical, the GP-X10M "14 "0.551 linearity varies with the sensing object size. GP-X12ML "50 "1.969 14 0.551 In the event the sensing object is larger than the sizes indicated in GP-X22KL "50 "1.969 20 0.787 the table below, the linearity specification (within �0.3 % F.S.) is satisfied by performing zero-adjustment and span adjustment when in contact using the scaling function. Mutual interference • If several sensor heads are mounted close together, some Sensor head Disc diameter " (mm in) Cylinder diameter " (mm in) specifications may not be satisfied. Therefore, proceed with the GP-X3SE 6 0.236 16 0.630 interference prevention function enabled. GP-X5SE 8 0.315 16 0.630 The interference prevention function eliminates interference among sensors by alternating sensor oscillations. Contact our GP-X8S 12 0.472 50 1.969 office for details about time charts etc. GP-X10M 12 0.472 50 1.969 If not using the interference prevention function, leave a distance GP-X12ML 25 0.984 55 2.165 more than the values given below. GP-X22KL 30 1.181 165 6.496 E Sensor head E (mm in) F (mm in) GP-X3SE 15 0.591 9 0.354 GP-X5SE 30 1.181 11 0.433 GP-X8S 40 1.575 15 0.591 Iron disc GP-X10M 40 1.575 15 0.591 F Iron cylinder GP-X12ML 170 6.693 50 1.969 t " (mm in) GP-X22KL 200 7.874 200 7.874 " mm ? ( in # : 135 mm 5.315 in t : 1 mm 0.039 in Sensing range Mounting sensor head • The sensing range is specified for the standard sensing object [stainless steel (SUS304) / iron [Cold rolled carbon steel (SPCC)], • The tightening torque should be under the value given below. 60�60�t 1 mm 2.362�2.362�t 0.039 in]. For sensing metals other than the standard sensing objects, use the correction Mounting with set screw coefficient stated below as a guideline. Verify with the actual • Make sure to use an M3 or smaller set screw having a cup-point. sensor before using. Set screw (M3 or less) Correction coefficient (Cup-point) A Sensor head GP-X3SE GP-X10M Model No. A (mm in) Tightening torque GP-X5SE GP-X12ML GP-X3SE 4 to 16 0.157 to 0.630 0.10 N�m or less Metal GP-X8S GP-X22KL 0.44 N�m or less GP-X5SE Stainless steel (SUS304), Iron 1 5 to 16 0.197 to 0.630 0.58 N�m or less GP-X8S Aluminum 0.5 approx. 12 ( GP-X PRECAUTIONS FOR PROPER USE Connection of sensor head and controller Mounting controller • Make sure that the power supply is off while connecting the • Use the attached controller mounting frame (ATA4811) and mount sensor head to the controller. the controller onto the panel by fastening the frame’s screws. Connection • Hold the sensor head’s connector by the outer ring and insert it into the connector provided on the controller for sensor head connection. Insert till you hear a click sound. Controller mounting frame (ATA4811) Controller • Refer to the ‘DIMENSIONS’ (P.14) for the panel cut-out dimension. • The mountable panel thickness is 1 to 5 mm 0.039 to 0.197 in. However, if using a controller communication unit or BCD output unit, make the panel thickness between 1 and 2.5 mm 0.039 and 0.098 in. Connector for Wiring sensor head connection • Make sure that the power supply is off while wiring. Connector outer ring • Take care that wrong wiring will damage the sensor head or the controller. • Verify that the supply voltage variation is within the rating. Removing • If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is • When removing, hold the connector outer ring and pull it straight connected to an actual ground. out. • In case noise generating equipment (switching regulator, inverter Cable extension for sensor head motor, etc.) is used in the vicinity of the sensor head or the controller, connect the frame ground (F.G.) terminal of the • When using a sensor head extension cable, turn the sensor head equipment to an actual ground. cable length selection switch side to the controller’s sensor head connector to ‘3 m � 7 m 9.843 ft�22.966 ft’ with the power • Do not run the wires together with high-voltage lines or power supply is off. After switching, reintroduce the power supply. lines or put them in the same raceway. This can cause malfunction due to induction. Sensor head cable length • Make sure to use an isolation transformer for the power supply. It selection switch Connector for sensor an auto-transformer (single winding transformer) is used, this head connection product or the power supply may get damaged. • In case a surge is generated in the used power supply, connect a surge absorber to the supply and absorb the surge. UP side : Standard (3 m 9.843 ft) � extension (7 m 22.966 ft) DOWN side : Standard (3 m 9.843 ft) (factory shipment setting) • The analog voltage output does not incorporate a short-circuit protection circuit. Do not directly connect a power supply or a capacitive load. • The coaxial connector for the extension cable is connected to the 0 V power supply. If installing to a metal plate or similar, insulate • Make sure that stress by forcible bend or pulling is not applied the connector from the surrounding metal. directly to the sensor cable joint. • If using separate power supplies for multiple controllers, use the same � V or 0 V supply for all. Others • Do not use during the initial transient time (2 sec. approx.) after the power supply is switched on. • This sensor is suitable for indoor use only. • Avoid dust, dirt, and steam. • Take care that the product does not come in direct contact with water, oil, grease, or organic solvents, such as, thinner, etc. DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.co.jp/ GP-X3SE GP-X5SE Sensor head Sensor head "2.5 "0.098 high frequency "2.5 "0.098 high frequency coaxial cable, 3 m 9.843 ft long coaxial cable, 3 m 9.843 ft long Coaxial connector for Coaxial connector for (6.2) 17 17 controller connection controller connection (0.244) 0.669 0.669 ("6.4) ("6.4) ("0.252) ("0.252) "3.8 "0.150 (17) (17) "5.4 "0.213 (0.669) (0.669) (25.7) (25.7) (1.012) (1.012) 13 GP-X DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.co.jp/ GP-X8S GP-X10M Sensor head Sensor head "2.5 "0.098 high frequency "2.5 "0.098 high frequency coaxial cable, 3 m 9.843 ft long coaxial cable, 3 m 9.843 ft long 14 17 (6.2) Controller mating coaxial connector 0.551 0.669 (0.244) Coaxial connector for 17 (6.2) controller connection 0.669 (0.244) ("6.4) ("6.4) ("0.252) ("0.252) (17) (17) M10�1 (0.669) (0.669) (25.7) Nut "8 "0.315 (25.7) (1.012) (1.012) 3 Toothed lock washer (internal tooth) 0.118 "18 "0.709 GP-X12ML GP-X22KL Sensor head Sensor head "2.5 "0.098 high frequency "2.5 "0.098 high frequency (6.2) (0.244) coaxial cable, 3 m 9.843 ft long (6.2) 17 21 coaxial cable, 3 m 9.843 ft long 35 1.378 (0.244) 0.669 0.827 17 20 0.787 7 Coaxial connector for Coaxial connector for 0.669 0.276 controller connection controller connection "10.1 ("6.4) "0.398 ("0.252) (25.7) (17) (1.012) (0.669) ("6.4) M12�1 0.039 M12�1 0.039 (25.7) ("0.252) "22 "0.866 Nut Nut 3.5 (1.012) "21 "0.827 0.138 3.5 Toothed lock Toothed lock washer (internal tooth) "21 "0.827 Diameter of 0.138 washer toothed lock (internal tooth) () washer Controller Comparative output operation indicators (Orange / Green / Orange) 5-digit, dual numerical display (Orange / Green) Timing indicator (Green) Terminal block 10 73 (16.7) 0.394 2.874 (0.657) GP-X series SHIFT key �44.5 �48 �1.752 �1.890 Zero-set key ENTER key Connector for RS-232C MODE indicator (Orange) UP key MODE key Sensor head cable length selection switch DOWN key Coaxial connector for sensor head connection Panel cut-out dimensions �0.6 �0.6 45 45 0 0 �0.024 �0.024 1.772 1.772 0 �0 When mounted in series �0.6 A�(48�n�2.5) 0 �0.024 �0.6 A�(1.890�n�0.098) 0 45 �0.6 0 45 0 �0.024 1.772 �0.024 0 1.772 0 A Minimum 90 3.543 Minimum 90 3.543 Note: The panel thickness should be 1 to 5 mm 0.039 to 0.197 in. Minimum 100 0.098 Note: The panel thickness should be 1 to 2.5 mm 0.039 to 0.098 in. 14 DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the SUNX website: http://www.sunx.co.jp/ GP-XBCD BCD output unit (Optional) Assembly dimensions with controller Connector for controller connection Mounting Controller Mounting bracket frame BCD output unit 40 1.575 Connector for BCD output (68) (2.677) 55 20 (8.5) 2.165 0.787 (0.335) Panel thickness 1 to 2.5 Connector for BCD output 0.039 to 0.098 (74.6) (27.8) (68) (2.937) (1.094) (2.677) Cable with connector for BCD output unit GP-XCOM Controller communication unit (optional) Assembly dimensions with controller Connector for communication Connector for controller connection Mounting Mounting bracket Controller frame Terminator switch Communication unit 40 1.575 Terminator switch (68) (2.677) 55 20 (8.5) 2.165 0.787 (0.335) Communication cable Panel Connector for thickness communication 1 to 2.5 0.039 to 0.098 (68) (74.6) (2.677) (2.937) All information is subject to change without prior notice. SUNX Limited 2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan Phone: +81-(0)568-33-7211 FAX: +81-(0)568-33-2631 Overseas Sales Dept. Phone: +81-(0)568-33-7861 http://www.sunx.co.jp/ FAX: +81-(0)568-33-8591 Printed on 100% recycled paper PRINTED IN JAPAN No. CE-GPX-7 May, 2003