917195D ONePlus 250-1000 ONEAC:917195- ONePlus 250-1000 9/27/11 11:57 AM Page 1 ONEAC ONePlus™ Series UPS (250 - 1000 VA): For some, conventional UPSs are “good enough.” But many find ordinary protection measures inadequate. Others face performance expectations with no tolerance for downtime. The ONEAC ON Series Power Conditioned UPSs are engineered to satisfy these demanding applications. Ultimate assurance of system reliability All UPS makers acknowledge the broad range of power disturbances that compromise system reliability. And all address them to some degree. But here’s the difference—the ONEAC proprietary power conditioning technology eliminates power problems entirely. Attention to detail and a front end isolation transformer protects our UPS system as well as your critical load, providing a level of protection that even the highest quality surge suppressor and filter technology cannot match. Exceptionally dependable battery backup We start with premium quality batteries and thermally isolate them for maximum life. We employ a unique • Line-interactive, power conditioned topology: eliminates all power charging circuitry attuned to the specific battery contaminants characteristics of each model; to speed recovery and minimize stress on batteries. Automatic monitoring of • Comprehensive front-panel display: provides real-time understanding battery condition ensures readiness. And our user of load and runtime replaceable battery pack allows rapid replacement without downtime, and without risk. • Front-access, user-replaceable batteries: quickly change batteries without dropping the load—no service tech needed Portable dedicated line • Small footprint and quiet operation: fits unobtrusively into most any Incorporating low-impedance power conditioning and environment ® ONEGround technology, the ONEAC ONePlus creates ® • Includes MopUPS Express UPS software: for automated system shutdown the "ONEAC Portable Dedicated Line." Unlike conventional dedicated isolated ground, simple plug & play installation • USB and RS232 communications ports: add flexibility and portability mean you’ll save time and money – now • Low-impedance isolation transformer: provides the highest level of and in the future. protection against transients Proven durability, backed by a 5-year warranty ® • ONEGROUND technology: solves ground loop problems The robust design of an ONEAC UPS can withstand the • True sine wave output: ensures clean power harshest electrical environments. Designed and manufactured under ISO 9001 quality procedures, the • Voltage regulation with buck and boost: compensates for a wide range of ONEAC ONePlus UPSs are exceptionally reliable. No voltage variations and conserves batteries surprise, then, that we back our UPSs with greater • Audible alarm: provides fault warnings (with silencing feature) confidence—5 years on all power and control systems, 2 years on the battery sub-system. • Cold starts: so systems can be tested before electrical wiring is complete • Safety approvals: 120 V model: UL, cUL; 230 V model: UL, cUL, CE, TUV ONEAC’s low- • Manufactured under ISO 9001: assures consistent quality and performance. impedance, isolation transformer provides a • 5-year warranty: (2-year on batteries): the best assurance of product quality level of protection and performance in the industry superior to surge • Free 24-hour technical support suppressor and filter based systems — providing greater assurance of system reliability. 917195D ONePlus 250-1000 ONEAC:917195- ONePlus 250-1000 9/27/11 11:57 AM Page 2 ONEAC ONePlus Series UPS: Specifications Approvals Power Conditioning 120 VAC models meet FCC Class A and are UL and cUL ONEAC’s unique power conditioning architecture provides superior protection listed to 1778. 230 VAC models meet FCC class A, EN62040- against the full range of power line disturbances. Components include: 2 category C2, and are UL and cUL listed to UL1778, are CE Full output isolation: ONEAC’s proprietary transformer design incorporates marked, and have TUV compliance to EN62040-1. power conditioning magnetics and voltage regulation magnetics in a single compact unit. Provides superior protection against lightning and other high Performance Characteristics Nominal input voltage: 120 VAC, 60 Hz, 230 V 50/60 Hz energy surges. Surge voltage withstand capability: ANSI/IEEE C62.41 Category A&B, 6 kV/ ® Virtual Kelvin Ground : Eliminates the full spectrum of conducted power 200 & 500 Amp, 100 kHz ringwave line noise (from 50 kHz to 10 MHz) in all modes, reduces the effect of Surge voltage let-through (max): Less than 10 V Normal mode (L-N), less than electrostatic discharge (ESD) and provides an exceptionally clean signal 0.5 V Common mode (N-G) when subjected to 6 kV ANSI/IEEE C62.41 Cat. A ringwave reference ground for electronic systems. Normal & common mode clamping response time: Instantaneous Transfer time (typ): 6 ms ONEGROUND technology: Diverts transient errant current from flowing On battery output voltage: Sine wave through ground circuit leads of datacom cables—minimizing the effect of ground potential shifts that can effect the performance of interconnected sys- Buck and boost: 120 V models maintain output voltage between 101 and 132 VAC while input voltage varies between 89 and 152 VAC. 230 V models maintain out- tems. put voltage between 202 and 251 VAC while input voltage varies between 182 and 281 VAC. Communications Load power factor range (crest factor): UPS .65 to 1.0 (3) Supports both USB and RS232 communications. MopUPS Express Batteries: Sealed, maintenance-free lead acid with a 2-4 year typical lifetime, Communications Software (and USB cable) are included for UPS and battery user replaceable monitoring and management. Recharge time to 90% available capacity: 3-6 hours after full discharge to cut-off ` Comprehensive Front-Panel Display Back Panel Serial Port Power Switch USB Port Audible Alarm / Load Input Circuit Breaker Power Output Receptacles Battery Fault ONePlus 250 and 400 VA, Temperature 120 V model and 254 VA, 230 V model shown. M O D E L S O N e P L U S 2 5 0 O N e P L U S 4 0 0 O N e P L U S 6 0 0 O N e P L U S 1 0 0 0 Part number 120 VAC model ONE254AG-SE ONE404AG-SE ONE604AG-SE ONE1004AG-SE 230 VAC model ONE254IG-SE ONE404IG-SE ONE604IG-SE ONE1004IG-SE Maximum capacity (volt-amps, watts) 250/167 400/268 600/402 1000/670 Batteries (1) 7 AH (1) 9 AH (2) 7 AH (3) 7 AH Typical runtime by system load: Due to application specific conditions, your actual run time may be different. @ half load/full load (min.) 22/8 12/5 12/5 12/5 Communication software MopUPS Express MopUPS Express MopUPS Express MopUPS Express Maximum dimensions - HxWxD - in. 7.1 x 5.5 x 14.3 7.1 x 5.5 x 15.4 9.3 x 7.1 x 15.0 9.3 x 7.1 x 15.0 HxWxD - (cm) 18 x 14 x 36.2 18 x 14 x 39 23.5 x 18 x 38 23.5 x 18 x 38 Net weight — lbs. (kg) 26 (11.9) 27 (12.1) 53 (24.2) 59 (27) Shipping weight — lbs. (kg) 28 (12.7) 28.6 (13) 57 (25.9) 63 (28.5) Input connector (6 ft. attached cord) 120 VAC model 5-15P 5-15P 5-15P 5-15P (6 ft. detachable cord) 230 VAC model IEC 320-C14 IEC 320-C14 IEC 320-C14 IEC 320-C14 Output receptacles**120 VAC model (4 ) 5-15R (4 ) 5-15R (8 ) 5-15R (8 ) 5-20R (T*) 230 VAC model (4) IEC 320-C13 [(4) IEC 320-C13 (8) IEC 320-C13 (8) IEC 320-C13 * “T-slot” output connectors will accept either 5-15P or 5-20P plugs. ** The ONePLUS UPS is usually an acceptable alternative to a dedicated isolated ground circuit. ONEAC, ONEGROUND, MopUPS and Virtual Kelvin Ground are registered trademarks and ONePlus is a trademark of ONEAC. All other trademarks are the property of their respective companies. (800) 327 8801 OPT. 2 in USA AND CANADA Specifications subject to change without notice. 27944 N. Bradley Road, Libertyville, IL 60048 Phone 847 816-6000 FAX 847 680-5124 www.oneac.com © 2011 ONEAC Printed in U.S.A. Part No. 917-195 Rev. D