R A HIGHER LEVEL OF CONFIDENCE ONePlus™ Series UPS (250 - 1000 VA): For some, conventional UPSs are “good enough.” But many find ordinary protection measures inadequate. Others face performance expectations with no tolerance for downtime. ON Series Power Conditioned UPSs are engineered to satisfy these demanding applications. Ultimate assurance of system reliability All UPS makers acknowledge the broad range of power disturbances that compromise system reliability. And all address them to some degree. But here’s the difference—ONEAC’s proprietary power conditioning technology eliminates power problems entirely. Attention to detail and a front end isolation transformer protects our UPS system as well as your critical load. Providing a level of protection that even the highest quality surge suppressor and filter technology cannot match. Exceptionally dependable battery backup We start with premium quality batteries. Thermally isolate them for maximum life. We employ a unique charging circuitry attuned to the specific battery characteristics of each model; to speed recovery and • Line-interactive, power conditioned topology: eliminates all power minimize stress on batteries. Automatic monitoring of contaminants battery condition ensures readiness. And our user replaceable battery pack allows rapid replacement • Comprehensive front-panel display: provides real-time understanding without downtime, and without risk. of load and runtime • Front-access, user-replaceable batteries: quickly change batteries Portable dedicated line without dropping the load—no service tech or tools needed Incorporating low-impedance power conditioning and isolated ground, ONePlus creates the "ONEAC Portable • Small footprint and quiet operation: fits unobtrusively into most any Dedicated Line." Unlike conventional dedicated lines, environment simple plug & play installation and portability mean ® • Includes MopUPS Express UPS software: for automated system shutdown you’ll save time and money – now and in the future. • USB and RS232 communications ports: add flexibility Proven durability, backed by a 5-year warranty • Low-impedance isolation transformer: provides the highest level of The robust design of an ONEAC UPS is impervious to protection against transients the harshest electrical environments. Designed and ® • ONEGROUND technology: solves ground loop problems manufactured under ISO 9001 quality procedures, ONePlus are exceptionally reliable. No surprise, then, • True sine wave output: ensures clean power that we back our UPSs with greater confidence—5 • Voltage regulation with buck and boost: compensates for a wide range of years on all power and control systems, 2 years on the battery sub-system. voltage variations and conserves batteries • Audible alarm: provides fault warnings (with silencing feature) • Cold starts: so systems can be tested before electrical wiring is complete ONEAC’s low-impedance, • Safety approvals: UL, cUL isolation transformer provides a level of • Manufactured under ISO 9001: assures consistent quality and performance. protection superior to • 5-Year warranty: (2-year on batteries): the best assurance of product quality surge suppressor and and performance in the industry filter based systems — providing greater • Free 24-hour technical support assurance of system reliability. A Chloride Power Protection Company R A HIGHER LEVEL OF CONFIDENCE ONePlus Series UPS: Specifications Approvals Power conditioning 120 VAC models are FCC Class A certified and listed under UL ONEAC’s unique power conditioning architecture provides superior protection 1778 and CSA22.2 safety standards. against the full range of power line disturbances. Components include: Full output isolation: ONEAC’s proprietary transformer design incorporates Performance characteristics power conditioning magnetics and voltage regulation and conversion magnetics Nominal input voltage: 120 VAC, 60 Hz in a single compact unit. Providing superior protection against lightning and other Surge voltage withstand capability: ANSI/IEEE C62.41 Category A&B, 6 kV/ 200 & 500 Amp, 100 kHz ringwave high energy surges. Surge voltage let-through (max): Less than 10 V Normal mode (L-N), less than ® Virtual Kelvin Ground : Eliminates the full spectrum of conducted power line 0.5 V Common mode (N-G) when subjected to 6 kV ANSI/IEEE C62.41 Cat. A noise (from 50 kHz to 10 MHz) in all modes, reduces the effect of electrostatic Normal & common mode clamping response time: Instantaneous discharge (ESD) and provides an exceptionally clean signal reference ground for Transfer time (typ): 6 ms electronic systems. On battery output voltage: Sine wave ONEGROUND technology: Diverts transient errant current from flowing through Buck and boost: maintains output voltage between 101 and 132 VAC while input voltage varies between 89 and 152 VAC. ground circuit leads of datacom cables—minimizing the effect of ground poten- tial shifts that can effect the performance of interconnected systems. Load power factor range (crest factor): UPS .65 to 1.0 (3) Batteries: Sealed, maintenance-free lead acid with a 2-4 year typical lifetime, Communications user replaceable Supports both USB and RS232 communications protocols. MopUPS Express Recharge time to 90% available capacity: 3-6 hours after full discharge to cut-off Communications Software (and USB cable) are included for UPS and battery All units provide thermal isolation for battery pack. monitoring and management. Comprehensive Front-Panel Display Back Panel Power Switch Serial Port Audible Alarm / Load USB Port Power Input Circuit Breaker Battery Output Receptacles Fault Temperature ONePlus 250 and 400 VA model shown. 60 Hz MODELS ONePLUS250 ONePLUS400 ONePLUS600 ONePLUS1000 Part number ONE254AG-SE ONE404AG-SE ONE604AG-SE ONE1004AG-SE Maximum capacity (volt-amps, watts) 250/167 400/268 600/402 1000/670 Batteries (1) 7 AH (1) 9 AH (2) 7 AH (3) 7 AH Typical runtime by system load: Due to application specific conditions, your actual run time may be different. @ half load/full load (min.) 22/8 12/5 20/5 18/5 Communication software MopUPS Express MopUPS Express MopUPS Express MopUPS Express Maximum dimensions - HxWxD - in. 7.1 x 5.5 x 14.3 7.1 x 5.5 x 15.4 9.3 x 7.1 x 15.0 9.3 x 7.1 x 15.0 HxWxD - (cm) 18 x 14 x 36.2 18 x 14 x 39 23.5 x 18 x 38 23.5 x 18 x 38 Net weight — lbs. (kg) 26 (11.9) 27 (12.1) 53 (24.2) 59 (27) Shipping weight — lbs. (kg) 28 (12.7) 28.6 (13) 57 (25.9) 63 (28.5) Input connector (6 ft. attached cord) 5-15P 5-15P 5-15P 5-15P Output receptacles (orange**) (4 ) 5-15R (4 ) 5-15R (8 ) 5-15R (8 ) 5-20R (T*) * “T-slot” output connectors will accept either 5-15P or 5-20P plugs. ** The ONePLUS UPS is an acceptable alternative to a dedicated isolated ground circuit. ONEAC, ONEGROUND, MopUPS and Virtual Kelvin Ground are registered trademarks and ONePlus is a ONEAC is a UL/BSI trademark of ONEAC Corporation. All other trademarks are the property of their respective companies. registered corporation — A Chloride Power Protection Company Certification No. A2900 (800) 327 8801 OPT. 2 in USA AND CANADA +44 (0) 2380 610311 in UK AND EUROPE 27944 N. Bradley Road, Libertyville, IL 60048 Phone 847 816-6000 FAX 847 680-5124 George Curl Way,Southampton, Hampshire SO18 2RY UK FAX +44 (0) 2380 610852 www.oneac.com Specifications subject to change without notice. © 2005 ONEAC Corporation Printed in U.S.A. Part No. 917-195 Rev. A1