Elite.Parts Manufacturers O OMRON H7ER-NV-BH
About product Datasheet FAQ

OMRON H7ER-NV-BH

Description

COUNTER TACH DC W/BACKLIGHT

Part Number

H7ER-NV-BH

Price

Request Quote

Manufacturer

OMRON

Lead Time

Request Quote

Category

PRODUCTS - H

Datasheet

pdf file

9639321_1.pdf

456 KiB

Extracted Text

R Self-Powered Tachometer H7ER Subminiature Tachometers With Improved Appearance and Features H Large display with 8.6 mm (0.338 in) height H Available with backlit LCD H Revolutions displayed up to five digits H PNP/NPN DC voltage input available H Switchable dual revolution display type available (-NV1 models); extended up --1 to 10000 m {rpm} H Dual revolution display according to --1 encoder resolution used; 1000 s --1 --1 {rps}/1000 m {rpm} or 1000.0 s --1 {rps}/1000.0 m {rpm} H NEMA 4/IP66 front H Replaceable battery H New black case Ordering Information J TACHOMETERS Count input p Disp playy Max. revolutions displayed(applicableencoder resolution) --1 --1 1000s {rps} (1pulse/rev.), 1000.0s {rps} (10pulse/rev.), --1 1 --1 1 1 10 00 00 0m m {{rrp pm m}} ((6 60 0p pu ullsse e//rre evv..)) 1 10 00 00 0..0 0m m {{rrp pm m}} ((6 60 00 0p pu ullsse e//rre evv..))←→ ←→ --1 10000m {rpm} (60pulse/rev.) (switchable) Partnumber PNP/NPN 7-segment LCD H7ER-NV-BH H7ER-NV1-BH universalDC withbacklight voltltageinput i t 7-segment LCD H7ER-NV-B H7ER-NV1-B No-voltageinput 7-segment LCD H7ER-N-B --- J MODELNUMBERLEGEND H7ER -N - 12 4 3 1.CountInput 3.CaseColor None: No-voltageinput B: Black V: PNP/NPN universalDC voltageinput 4.Display None: 7-segment LCD without backlight 2.NumberofDigits H: 7-segment LCD withbacklight None: 4digits 1: 5digits 1 H7ER H7ER J ACCESSORIES (ORDERSEPARATELY) Item Partnumber Replacement battery Y92S-36 Wire-wrapterminal(set of twoterminals) Y92S-37 Panel-mounting gadapt per 26mm× 45mm Y92F-75 24.8mm× 48.8mm Y92F-77B Specifications J GENERAL Item H7ER-NV-B H7ER-N-B H7ER-NV1-B H7ER-NV-BH H7ER-NV1-BH Operatingmode Uptype Mountingmethod Panel-mounting Externalconnections Screw terminals, wire-wrapterminals (SeeNote3.) Display 7-segment LCD withor without backlight (character height: 8.6mm) (SeeNote4.) Number of digits 4 5 Count input PNP/NPN universalDC No-voltageinput PNP/NPN universalDC voltageinput voltageinput Max. countingspeed 1kHz 10 kHz --1 --1 Max. revolutions displayed(See 1,000s {rps} (Whenencoder resolutionof 1,000.0s {rps} (Whenencoder Note5.) 1pulse/rev is used.) resolutionof 10pulse/rev is used.) --1 --1 1,000m {rpm} (Whenencoder resolutionof 1,000.0m {rpm} (Whenencoder 60pulse/rev is used.) resolutionof 600pulse/rev is used.) --1 ←→ 10,000m {rpm} (Whenencoder resolutionof 60pulse/rev is used.) (Switchablewithswitch) Attachment Waterproof gasket, panel-mountingbracket, revolutionunit labels (SeeNote5.) Approvedstandard UL508, CSA C22.2No.14, Lloyds Conforms toEN61010-1/IEC61010-1(pollutiondegree2/overvoltagecategory III) Conforms toVDE0106/P100 Note: 1. Reset is not available. 2. Whenthereis noinput, thedisplay willbe0.0or 0. 3. Wire-wrapTerminals (Y92S-37) canbeorderedseparately. 4. Only PNP/NPN UniversalDC voltageinput models areavailablewithabacklight. --1 --1 5. “rpm,” “rps,” “s ,” and“m ,” labels areincluded. J RATINGS Item H7ER-NVj-B H7ER-N-B H7ER-NVj-BH Supply voltage Backlight model: 24VDC (for backlight lit) Not required(poweredby battery) No-backlight model: Not required(poweredby battery) High(logic) level: 4.5to30VDC Novoltageinput Count input Low Low ((llogic ogic)) lev level: el: 0 0tto o2 2V VD DC C Max Maxiim mum umssh hor ortt-cciirrccu uitit iimpedanc mpedance: e: 10 10kkΩ Ωmax max.. (Input impedance: Approx. 4.7kΩ) Short-circuit residualvoltage: 0.5V max. Reset input Minimumopenimpedance: 750kΩmin. Max. countingspeed 5-digit models: 10 kHz 1kHz 4-digit models: 1kHz Minimumsignalwidth 10 kHz: 0.05ms 1kHz: 0.5ms Terminalscrew tighteningtorque 0.98NS mmax. Ambient temperature Operating: --10°Cto55°C(14°F to131°F) withnoicing Storage: --25°Cto65°C(--13°F to149°F) withnoicing Item H7ER-NVj-B H7ER-N-B H7ER-NVj-BH Ambient humidity Operating: 25%to85% 2 H7ER H7ER J CHARACTERISTICS Item H7ER-NVj-B H7ER-N-B H7ER-NVj-BH Insulationresistance 100MΩmin. (at 500VDC) between 100MΩmin. (at 500VDC) between current-carryingmetalparts andexposed current-carryingmetalparts andexposed non-current-carryingmetalparts, andbetween non-current-carryingmetalparts thebacklight power supply andcount input terminals/reset terminals for backlight models Dielectric strength 1,000VAC, 50/60Hz for 1minbetween 1,000VAC, 50/60Hz for 1minbetween current-carryingmetalparts andexposed current-carryingmetalparts andexposed non-current-carryingmetalparts andbetween non-current-carryingmetalparts thebacklight power supply andcount input terminals/reset terminals for backlight models Impulsewithstandvoltage 4.5kV betweencurrent-carryingterminalandexposednon-current-carryingmetalparts Noiseimmunity Betweeninput terminals:±600V innormal ±500V innormalmode,±1.5kV incommand mode,±1.5kV incommandmode mode For backlight power supply (backlight model): ±480V innormalmode,±1.5kV incommand mode Static immunity ±8kV (malfunction) Vibrationresistance Malfunction: 0.15-mmsingleamplitudeat 10to55Hz for 10mineachin3directions Destruction: 0.375-mmsingleamplitudeat 10to55Hz for 2hrs eachin3directions 2 Shock resistance Malfunction: 200m/s 3times eachin6directions 2 Destruction: 300m/s 3times eachin6directions Battery life 7years min. withcontinuous input at 25°C (lithiumbattery) EMC (EMI) EN50081-1 EmissionEnclosure: EN55022class B (EMS) EN50082-2 Immunity ESD: EN61000-4-2: 4-kV contact discharge(level2) 8-kV air discharge(level3) Immunity RF-interferencefromAMRadioWaves: ENV50140: 10V/m(80MHz to1GHz) (level3) Immunity RF-interferencefromPulse-modulatedRadioWaves: ENV50204: 20V/m(900MHz± 5MHz) (level3) Immunity ConductedDisturbance: ENV50141: 10V (0.15to80MHz ) (level3) Immunity Burst: EN61000-4-4: 2-kV power line(level3) 2-kV I/O signalline(level4) Enclosurerating Front panel: IP66, NEMA4 Terminalblock: IP20 Weight (seeNote.) Non-backlight model: Approx. 60g Backlight model: Approx. 65g Note: Weight includes waterproof gasket andpanel-mountingbracket. 3 H7ER H7ER Nomenclature Front view J TACHOMETER Not used Countingspeedswitch For H7ER-NV1-jj Bottomview Counting Speed Switch Settingsand Unit Label Application Countingspeed Max.revolutions Applicableencoder Applicableunit switch setting displayed resolution label Model (seenote) Front panel H7ER-NV1-jj --1 --1 10000 m {rpm} 60 pulse/rev. “m ’or “rpm” (default setting) --1 1000.0 m {rpm} --1 600 pulse/rev. “m ’or “rpm” --1 1000.0 s {rps} --1 “s ’or “rps” 10 pulse/rev. Terminal block H7ER-N-j No setting is --1 --1 1000 m {rpm} “m ’or “rpm” 60 pulse/rev. required H7ER-NV-jj --1 --1 1000 s {rps} 1 pulse/rev. “s ’or “rps” Note: Performswitchsettingbeforemountingtoacontrolpanel. Operation J OPERATING MODES H7ERTachometer IncrementingOperation WithinUnit Time(Up) Count period Count period 0.25 s (1 s) (1 s) Internal gate Display refreshed Refresh Counter reset Internal count value Previous count Number display value display Display refreshed Display refreshed every 1.25 s every 1.25 s 4 H7ER H7ER Dimensions Unit: mm(inch) J H7ER-N 44.8 (1.76) PanelCutout Separatemounting 60 min. 24 22 (0.94) (0.87) 60 min. 48 2 48.5 5 (1.89) (1.91) +0.5 45 0 +0.5 22.2 0 Dimensionswith Panel-Mounting Bracket Joint mounting +10 (48¢Units - 2.5) 44.8 0 (1.76) +0.5 22.2 0 Waterproofingis not possible for joint mounting. • Whenmounting, insert theCounter intothecutout. Insert theadapter fromtheback andpushinthe Counter whilemakingthegap betweenthefront panelandthe cutout panelas smallas possible. Usescrews tosecuretheCounter. If 35 37 24 22 (1.38) waterproofingis desired, insert the (1.46) waterproof gasket. • WhenseveralCounters areinstalled, 48 2 48.5 ensurethat theambient temperature 5 willnot exceedspecifications. • Theappropriatethickness of the panelis 1to5mm. Installation J TERMINALARRANGEMENT Bottomview: View of theTachometer rotatedhorizontally 180° BacklightModel Non-backlightModel Backlight 24 VDC Pulse input Pulse input 5 H7ER H7ER Connections Note: Select input transistors accordingtothefollowing: Dielectric strengthof thecollector≧ 50V Leakagecurrent <1µA J NON-VOLTAGE INPUTMODEL J PNP/NPNUNIVERSALDCVOLTAGE INPUTMODELS WITHBACKLIGHT Transistor Input (OpenCollector of anNPN Transistor) Transistor Input Open collector of Open collector of Open collector of or an NPN transistor Input an NPN transistor an PNP transistor Backlight 24 VDC Input J PNP/NPNUNIVERSALDCVOLTAGE INPUT MODELS WITHOUTBACKLIGHT Transistor Input Open collector of Open collector of or an NPN transistor an PNP transistor Input 6 H7ER H7ER Accessories (Order Separately) An H7ER is supplied with a mounting bracket and nut. In addition, the panel-mounting adapters shown here allow the H7ER to be fitted to existingpanelcutouts. J Y92F-75 PANEL-MOUNTING ADAPTER FOR26¢ 45 RECTANGULARCUTOUT Must beusedwithmountingbracket suppliedwiththeCounter Two 3.5 dia. mounting holes PanelCutout Two M3 31 26 24.2 22.2 (1.22) (1.02) 26 45.2 4 45 48.2 63 63 (2.48) 72 (2.83) J Y92F-77BPANEL-MOUNTING ADAPTER FOR24.8¢ 48.8 RECTANGULARCUTOUT Must beusedwithmountingbracket suppliedwiththeCounter Panelcutout 28.8 24.8 24.2 22.2 (1.13) (0.98) 48.8 45.2 4 (1.92) 48.2 53.8 (2.12) 44.8 J Y92S-37 WIRE-WRAP TERMINAL (1.76) Wire-wrap terminal (1× 1 mm) (SETOFTWO TERMINALS) 24 22 (0.94) 48 48.5 2 17.1 (1.89) 5 65.6 (2.58) Thewire--wrapterminals haveacross sectionaldimensionof Wire Bit Sleeve Wrapped 1x1mm. Select oneof threeguages of wirefromthetableat state right. Alsolistedinthetableis theappropriatewiringhardware AWG22 2-A 2-B Normal AWG24 1-A 1-B Normal AWG26 1-B 1-B Normal 7 H7ER H7ER J Y92S-36 REPLACEMENT(LITHIUM) BATTERY (3 V) 24.5 dia. 7.7 Precautions ! WARNING J BEFORE USE This product has a built-in lithium battery. Do not short-circuit the+and-- terminals,charge,disassemble,deform,orexpose Aninsulationsheet has beeninsertedtomaintainthequality of thebatterytofire.Thebatterymayexplode(break), catchfire, theTotalizer intheevent of alongperiodwithout use. Besureto or causeliquidleakage. removethis sheet beforeattemptingtousetheproduct. Removetheinsulationsheet andpress theReset Key onthe ! Caution front panelof theCounter. (WiththeH7ER-N,-NV(-H),-NV1(-H), models, “0” or “0.0” willbedisplayedafter 1s.) Donotuseanybatteryotherthanthespecifiedone(Y92S-36). Using another battery may cause liquidleakage or breakage, resultinginmalfunctionor injury. Insulation Sheet ! Caution If avoltageother thantheratedoneis applied, internal elements may bedamaged. Reset Key Donot usetheCounter inthefollowingplaces: • Locations subject todirect sunlight. Switchsettings ontheCounter must beperformedbefore mountingit toacontrolpanel. • Locations subject tocorrosivegases. • Locations subject todust. Donot usetheCounter inlocations subject to: • Severechanges intemperature. • Condensationas theresult of hightemperatures. J MOUNTING PRECAUTIONS FOR PANEL-MOUNTING Althoughtheoperatingsectionis watertight (conformingto NEMA 4, IP66), rubber packingis providedtoavoidwater leakagethroughthegapbetweentheCounter andpanelcutout. Unless this rubber packingis tightly squeezedon, water may permeateinsidethepanel. For this reason, besuretotightenthe screws for fixingthepanel-mountingbracket. ScrewforthePanel-MountingBracket The wider side must Adapter Adapter screw section face the panel. 0.5 to 1 mm Tighten the screw until the distance is within the range shown above. Panel 8 H7ER H7ER J RESETINPUTANDCOUNTINPUT J COUNTINPUTORRESETINPUTTO MORE THANONE H7ERCOUNTERAT TheH7ER operates usingits built-inBattery. If theH7ER is ATIME connectedtoadevicethat has +V andOUT terminals connected withadiodeas showninthecircuit diagram, thecircuit indicated PNP/NPN UniversalDC VoltageInput by thearrow 1or 2willbeformedwhenthedeviceis turnedOFF. As aresult, theH7ER may bereset or count by one. Such devices shouldnot beconnectedtotheH7ER. Count input or or reset input If anexcessivevoltageis appliedtothecount or reset input or terminals, theinternalelements may bedamaged. Ensurethat thefollowingvoltages arenot exceeded: SPNP/NPN universalvoltageinput model: 30VDC SAC/DC voltageinput model: Note: H (Reset ON) levelmust be4.5V minimum. At count input: 240VAC (peak voltage: 338V) 4.7(kΩ)/N +V 240VDC H= 4.7(kΩ)/N +R At reset input: 3VDC (no-voltageinput) No-voltageinput model: 3VDC No-voltageInput Donot removetheouter casewhenvoltageis beingappliedto thepower supply terminals or totheinput terminals. or Theinput for theH7Ej-NFV-j is ahigh-impedancecircuit so influencefromaninducedvoltagemay result inmalfunction. Whentheinput signalwiringis longer than10m(stray capacitanceof 120pF/m, at roomtemperature), aCR filter or a Note: 1. Theleakagecurrent of thetransistor usedfor input bleeder resistor shouldbeconnected. must beless than1µA. 2. Theforwardvoltageof thediodemust beas low as possible(i.e., 0.1V maximumwithanI of 20µA) so F thevoltagebetweenterminals 3and4willbe0.5V whenthereset input is ON. 9 Internal circuit H7ER H7ER J INPUTANDPOWERSUPPLY J BATTERY REPLACEMENT Donot apply voltageontheCounter if theCounter is amodel RemovethewiringwhenreplacingtheBattery. Donot comein that operates withno-voltageinput, or theinternalcircuit of the contact withany itemtowhichhighvoltageis beingapplied. Counter may bedamaged. Doingsomay result inelectric shock. Donot connect any singleinput signalinparalleltoCounter BeforechangingtheBattery, besurethat youarenot carrying models operatingwithno-voltageinput andthoseoperatingwith any static electric charge. voltageinput, toavoidmalfunction. Procedurefor replacingtheBattery (refer tothediagrams below): Whenconnectingasensor totheCounter that operates with no-voltageinput, makesurethat thesensor has opencollector 1. Usingthetool, pry openthelift-tabonthecase. (1) output. 2. Pullthebody out of its outer case. (2) 3. Lift theBattery upby theedgeandremoveit. (3) Sensor When removing the Battery, do not come in contact with the display areaor any internalparts. 4. Wipetheback of thenew Battery beforeinsertingit. 5. Ensurethat the+and -- terminals arecorrectly oriented. 6. AfterreplacingtheBattery,re-insertthebodyintoitscase.(4) Check that thecaseis securely heldinby thelift-tab. 7. Press the Reset Key before use (not necessary for Theoperationof theCounter may beaffectedif thelinevoltage H7ER-N,-NV,-NV1). (5) of thepower supply exceeds 500pF (about 10m, withparallel WhentheinternalBattery nears expiration, thedisplay may wires of 2x 2mm). Keepallwires as short as possible. When flicker. usingshieldedwire, stray capacitancemay occur. Whenconnectinganopencollector input fromatransistor tothe (2) (1) Tool Counter that operates withno-voltageinput, makesurethat the leakagecurrent of thetransistor is 5µA maximum. Whenconnectingcount input fromanSSR totheCounter that operates withAC/DC voltageinput, useOMRON’s G3TA-IA or G3TA-ID SSR. Makesurethat theleakagecurrent of theSSR is 0.1mA maximumor connect ableeder resistor inparalleltothe (1) input circuit of theCounter. (3) or Leakage current: 0.1 mA max. or (4) or *Bleeder resistor The voltage between terminals 1 and 2 must be 1.5 V maximum when the SSR is OFF. (5) J BACKLIGHTPOWERSUPPLY J EN/IECSTANDARDS Toreducevariationinthebrightness of thebacklight whenusing morethanoneH7ER withabacklight, usethesamepower Thecounter input, reset input, andbacklight power supply supply for allthebacklights. terminals of theno-voltageinput or PNP/NPN universalDC voltageinput models (H7Ej-N,-N1, H7Ej-NV(-H),-NV1(-H)) are not isolated. A SELV power supply conformingtoAppendix H of IEC61010-1 shouldbeusedfor thecounter input, reset input andbacklight power supply terminals. A SELV power supply is apower supply WhenconnectingtheDC power supply for thebacklights, be for whichtheinput andoutput havedoubleor reinforced suretoconnect thepolarities correctly. insulation, andfor whichtheoutput voltageis 30Vrems with42.4 V peak or 60VDC max. (Only theH7Ej-NVj-H has a J UNITLABELFORTIME COUNTERAND backlight.) TACHOMETER Theterminals for counter input andreset input for AC/DC A unit label has been packed with the Counter. Use in accordance multi-voltageinput models havebasic insulation. withtheapplication. Connect thereset input terminals toadevicethat does not have exposedcurrent-carryingparts andhas basic insulationfor 240VAC. 10 H7ER H7ER NOTE:DIMENSIONSSHOWNAREINMILLIMETERS.Toconvertmillimeterstoinchesdivideby25.4. R OMRONON--LINE OMRONELECTRONICS LLC OMRONCANADA, INC. OneEast CommerceDrive 885MilnerAvenue Global -- http://www.omron.com Schaumburg, IL60173 Scarborough, OntarioM1B 5V8 USA -- http://www.omron.com/oei 1-800-55-OMRON Canada -- http://www.omron.com/oci 416-286-6465 C at . N o. G C T MC N 1 8/06 S pec if ic at ions s ubjec t t o c hange w it hout not ic e. P r int ed in U . S . A . 11

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the H7ER-NV-BH have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

Omron H3CRA8AC100240 Solid-state Multifunctional Timer with Wide AC/DC Power Supply Range, DIN 48 x ...

product

Omron H3YN-21-AC24 Timer - Extended Timing Range, 24V Timer Module

product

Omron H5CX-A AC100-240 Digital Multifunction Timer with Supply Voltage Max:240VAC, Digit/Alpha Heigh...

product

Omron H7AN Counter/Timer Modules-Digital Counter (DIN 72 × 72)

product

Omron H7CX-A114D1-N Counters/Timer Modules-48*48mm (1/16 DIN) , 11-Pin Socket , 4 Digits , 1-Stage ,...

product

Omron H7CX-A114-N Counter/Timer Modules-48*48mm (1/16 DIN) , 11-Pin Socket , 4 Digits , 1-Stage