OMRON E3A2-DS70M4D
Specifications
Amplifier Type
Plug In Outputs
Connection
Screw Terminals
Features
Optional solid-state outputs
Light Source
Pulse Modulated Infrared LED
Output Configuration
Relay
Sensing Distance
70 cm
Sensing Method
Diffuse Reflective
Features
- Light-ON/Dark-ON operation, switch selectable
- Optional solid-state outputs
- Plug-in replaceable outputs
- Polarized diffuse and through-beam models
- Standard with 3 A relay output
- Timer models provide selectable ON-delay, OFF-delay and one-shot outputs
Datasheet
Extracted Text
E3A2 E3A2 AC/DC Supply with Timer Models E3A2 Slim Sensor with Plug-in Outputs, Built-in Time Delays Plug-in replaceable outputs Light-ON/Dark-ON operation, switch selectable Optional solid-state outputs Polarized diffuse and through-beam models Timer models provide selectable ON-delay, OFF-delay and one-shot outputs Standard with 3 A relay output Ordering Information SENSORS Method of detection Through-beam Retroreflective Diffuse reflective Sensing distance 10 m (32.8 ft) 3 m (9.8 ft) 70 cm (27.6 in) Part number Without timer E3A2-10M4 E3A2-R3M4 E3A2-DS70M4 ON-delay, OFF-delay, one-shot E3A2-10M4T E3A2-R3M4T E3A2-DS70M4T equal ON- and OFF-delays (0.1 to 5 seconds) Independent ON-delays and E3A2-10M4D E3A2-R3M4D E3A2-DS70M4D OFF-delays (0.1 to 5 seconds) ACCESSORIES Description Part number Solid-state AC (SCR) output module; 200 mA, 250 VAC max. load G3K-2R2P-1 output DC NPN output module; 200 mA, 30 VDC max. load, dual complementary G3KD-YR2P-1 modules DC PNP output module; 200 mA, 30 VDC max. load, dual complementary G3KD-YR2P-2 Reflector adapter for stud-mounting E39-R1 reflector E39-L7 REPLACEMENT PARTS Description Part number Relay output module, SPDT, 3 A at 250 VAC (output supplied with each sensor) G6C-2117P-DC8 Reflector (supplied with retroreflective sensor) E39-R1 Mounting bracket (supplied with each sensor) E39-L34 2 E3A2 E3A2 Specifications Part number E3A2-10 E3A2-R3 E3A2-DS70 Method of detection Through-beam Retroreflective Diffuse reflective Supply voltage 24 to 240 VAC, 50/60 Hz; 12 to 240 VDC Power Relay output type Emitter: 0.82 W max. 1.5 W max. consumption Receiver: 1.2 W max. DC solid-state output type AC solid-state output type Emitter: 0.82 VA max. 2 VA max. Receiver: 1.2 VA max. Sensing distance 10 m (32.8 ft) 3 m (9.8 ft) 70 cm (27.6 in) with with E39-R1 reflector 10 x 10 cm (3.94 x 3.94 in) (included) 90% reflectance white mat paper Light source Pulse modulated Pulse modulated red Pulse modulated infrared LED (950 nm) LED, polarized (680 nm) infrared LED (950 nm) Detectable object type Opaque materials, Opaque and mirror Opaque and 26 mm (1.02 in) surface materials, 56 mm translucent materials minimum dimension (2.20 in) min. dimension Operation mode Light-ON/Dark-ON, switch selectable Sensitivity Fixed Adjustable Mutual interference protection Not provided Provided Control Relay Type SPDT with G6C-2117P-DC8 output module (standard) output Max. load 3 A, 250 VAC (p.f. = 1); 3 A, 30 VDC AC Type SCR with G3K-2R2P-1 output module (optional) solid- Max. load 200 mA, 250 VAC state Min. load 5 mA Max. inrush 2 A Off-state leakage current 1 mA max. DC Type NPN-SPDT with G3KD-YR2P-1 output module (optional) solid- PNP-SPDT with G3KD-YR2P-2 output module (optional) state Max. load 200 mA, 30 VDC Max. on-state voltage drop 2 VDC at 200 mA Response Relay 15 ms max. with G6C-2117P-DC8 output module (standard) time (ON AC solid-state output 30 ms max. with G3KD-2R2P-1 output module (optional) and OFF) DC solid-state 1 ms max. with G3KD-YR2P-1 or -2 output modules (optional) Timing Type E3A2- T Normal, ON-delay, OFF-delay, one-shot or equal ON- and OFF-delays, functions switch selectable Type E3A2- D Independent ON- and OFF-delays Range 0.1 to 5 seconds Circuit protection Output short-circuit Provided (AC solid-state and DC solid-state output modules only) DC power supply reverse Provided polarity Indicators Emitter: Light Incident (red LED) and Output Stability Power On (red LED) (green LED); Receiver: Light Incident Output Operation (yellow LED) on timer-equipped (red LED) and output sta- models bility (green LED); Output Operation (yellow LED) on timer-equipped models Materials Lens Plastic Case Plastic Mounting Side surface mount with two through holes; E39-L34 bracket and hardware included Connections Conduit 1/2-14 NPT Wire Terminal screws Weight Emitter: 200 g (7.1 oz) 200 g (7.1 oz) Receiver: 200 g (7.1 oz) (Table continues on the next page) 3 E3A2 E3A2 Specifications Table - continued from previous page Part number E3A2-10 E3A2-R3 E3A2-DS70 Enclosure ratings NEMA 1, 4, 4X, 12 IEC 144 IP66 Approvals UL Listed, File Number E41515 Ambient Operating -25° to 55°C (-13° to 131°F) temperature Storage -30° to 70°C (-22° to 159°F) CONNECTIONS Through-Beam Type Retroreflective and Diffuse Reflective Types 24 to 240 VAC See Output 12 to 240 VDC Circuit Diagrams Light Source Receiver 24 to 240 VAC See Output 24 to 240 VAC 12 to 240 VDC Circuit Diagrams 12 to 240 VDC OUTPUT CIRCUIT DIAGRAMS Relay output AC solid-state output DC solid-state PNP output DC solid-state NPN output 4 E3A2 E3A2 TIMING CHART NOTE: 1. For sensors without built-in timer functions, operation follows the NORM mode shown with multi- function time delay models. 2. T , T and T denote set time, variable 1 2 within 0.1 to 5 second range. 3. For multifunction time delay models (part numbers ending in “T”), the ON- and OFF-delay time settings will be the same. 4. For ON- and OFF-delay models (part numbers ending in “D”), T and T are 1 2 independently variable. 5. O.S.D.: one shot delay 5 E3A2 E3A2 Engineering Data EXCESS GAIN RATIO Through-Beam Type Retroreflective Type Diffuse Reflective Type Distance [m (ft)] Distance [m (ft)] Distance [cm (in)] LIGHT SOURCE/RECEIVERREFLECTOR SETTING RANGE SETTING RANGE Retroreflective Type Through-Beam Type Distance X [m (ft)] Distance X [m (ft)] OPERATING RANGEDETECTING DISTANCE VS. MINIMUM TARGET SIZE (AT MAXIMUM SENSITIVITY) Diffuse Reflective Type Diffuse Reflective Type 2 2 Distance X [cm (in)] Area of detectable object [cm (in )] 6 Distance Y [mm (in)] Distance Y [cm (in)] Excess gain ratio Excess gain ratio Detecting distance [cm (in)] Distance Y [mm (in)] Excess gain ratio E3A2 E3A2 Dimensions Unit: mm (inch) LIGHT and STABILITY indicators LIGHT-ON/DARK-ON and function selector Mounting holes OPERATION indicator (Timer function equipped type only) 2-5.5 (.22) dia. 4-hexagonal spot facing mounting holes width across flats: 8 (.31) depth: 4 (.16) E39-R1 Reflector E39-L7 Reflector Adapter OMRON ELECTRONICS LLC OMRON ON-LINE OMRON CANADA, INC. One East Commerce Drive Global - http://www.omron.com 885 Milner Avenue Schaumburg, IL 60173 USA - http://www.omron.com/oei Scarborough, Ontario M1B 5V8 Canada - http://www.omron.com/oci 1-800-55-OMRON 416-286-6465 Cat. No. CEDSAX4 11/01 Specifications subject to change without notice. Printed in the U.S.A.
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the E3A2-DS70M4D have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods