OCTAGON SYSTEMS 4720
Specifications
CONNECTORS
10–pin connector for each COM port; Octagon cable provides standard DB–9 interface, 2–pin connector for power, 4–pin connector for AT battery, Auxiliary I/O connector is 34–pin header; an optional, breakout board provides LPT1, keyboard, and AT battery through this connector
DRIVES
Solid–state disk 0 (SSD0), 1 MB flash contains software, with 512 KB available to user; appears as hard
ENVIRONMENTAL
AT battery port for real time clock (no battery necessary for operation), Size: 4.5” x 4.9”, Micro PC form factor, Power: 5V ±0.25V @ 1.0A maximum; full 40 MHz operation 490 mA typical, suspend mode 200 mA typical, –40° to +85° C operating range at 25 MHz, 0° to +60° C operating range at 40 MHz, Relative humidity 5 to 95%, noncondensing
I/O
Four eight–wire serial ports, 16C550 compatible, RS–232, 16–byte FIFO buffered, ESD protected, RS–422 and RS–485 available on COM2 with use of network interface module (NIM), LPT1 port with multifunctional capability
MOUNTING
Micro PC card cage or ISA expansion bus, Panel mounted with standoffs
Processor
ALi M6117 386SX
SYSTEM
ALi M6117 386SX, 40 MHz clock speed, jumperable to 25 MHz, PC–compatible DMA controllers, interrupt controllers, and timers, Datalight ROM–DOS 6.22 in ROM, Phoenix BIOS with industrial extensions, 2 MB surface–mount fast page DRAM, Interrupt routing for flexibility, 768 words available in serial EEPROM for user, Watchdog timer with 1.6 seconds timeout, software controlled, Power management, for battery–operated environments, Boots from on–card solid state disk or floppy
USER INTERFACE
CRT through Micro PC expansion card, PS/2 keyboard (requires custom cable or breakout board), Speaker port, Serial console through COM1 to host computer
Datasheet
Octagon Systems=4720=datasheet1-916324763.pdf
411 KiB
Extracted Text
Reliability in the toughest environment The 6030 PC microcontroller is a 386–powered Micro PC computer with the essential I/O functions for embed- ded applications. It integrates serial ports, LPT1, digital I/O (through LPT1), and floppy drive (through LPT1) into a single card. The 6030 is ideal for applications in trans- portation, security, military, communications, distributed control, point–of–sale, ticketing machines, weighing equipment, and other similar applications. The low–power requirements make it suitable for situations Octagon products are designed and manufac- tured under the supervision of an ISO 9001- where battery life or heat dissipation is a concern. 2000 certified quality management system. The 6030 will withstand high shock and vibra- The 6030 comes loaded with ROM DOS 6.22, and is tion, and operates in temperature ranges from ready to go right out of the box. The built–in INT17 –40° to +85° C. functions for DOS provide easy access to the enhanced features such as watchdog timer, read/writes to serial EEPROM, and user jumper. � BIOS: Phoenix AT BIOS with industrial extensions. The BIOS is fully PC–AT compatible. It supports key- Micro PC cards plug into any ISA expansion slot or board, mouse, and other PC peripherals. The BIOS Micro PC Card Cage, or can be mounted with standoffs. also has additional Octagon BIOS extensions for The Octagon family of Micro PC controllers, expansion watchdog timer, serial EEPROM access, and user jumper. cards, and card cage provide a complete solution for embedded applications. At power–on, the BIOS performs a Power–On–Self– Test (POST) and outputs the results via an LED. Refer to the 6030 user’s manual for an interpretation Features of the codes. SYSTEM: � DRAM: 2 MB surface–mount fast page DRAM. � CPU: TALi M6117 386SX. It is a medium–perform- � Data storage: 1 MB flash contains software, with 512 ance, low–power microprocessor with a clock speed KB available to user; it appears as hard drive to the of 40 MHz. The ALi contains the complete x86 core, system. SSD2 is a 128 KB SRAM for data storage with and is 100% object code compatible with the Intel battery backup; it also appears as a hard drive to the x86 microprocessors. system. � Super I/O: Controls the four 16C550 COM ports � Watchdog timer: Fail–safe against program crashes or and LPT1. processor lockups. It has a timeout period of 1.6 sec- � Operating system: Preloaded with Datalight ROM onds. INT17 calls are used to enable, strobe, and dis- DOS 6.22. It fully compatible with early versions of able the watchdog timer from your application. If the ® Windows and QNX. timer expires, it performs a hardware reset. 11 6510 W. 91st Avenue • Westminster CO 80031 • 303-430-1500 www.octagonsystems.com DRIVES: USER INTERFACES: � Floppy: The 6030 supports a floppy drive through the � Monitors: Monitors can be connected to the 6030 LPT1 port. through Micro PC expansion cards. � Serial console: You can establish communication with the 6030 using a host computer as a serial con- I/O: sole. COM1 of the 6030 is connected to a COM port � Keyboard: PS/2 (not required for operation). on the host PC. A program such as SmartLINK or Hyperterminal on the host PC directly communicates � LPT1: IEEE 1248A compliant, and provides EPP and to the 6030. This allows you to download programs ECP modes. It can also be configured as a floppy or configure the 6030. drive interface or as digital I/O. Industry–standard interfaces allow it to be used for matrix keypads, LCD displays, or opto racks. � Digital I/O: The LPT port can be configured as 17 Technical specifications additional lines of digital I/O. All lines can be pro- grammed as inputs or outputs according to the PC SYSTEM: XT/AT standard. These lines will interface with logic � ALi M6117 386SX devices, switch inputs, LEDs, and industry–standard � 40 MHz clock speed, jumperable to 25 MHz opto module racks. Octagon has a variety of opto modules and termination boards for easy access for � PC–compatible DMA controllers, interrupt con- field wiring. trollers, and timers � COM1 through COM4: Four 16C550–compatible � Datalight ROM–DOS 6.22 in ROM serial channels are provided. Each channel is an � Phoenix BIOS with industrial extensions eight–wire, full duplex, asynchronous RS–232C inter- face with a double 16–bit FIFO buffer. The baud rate � 2 MB surface–mount fast page DRAM is programmable with rates from 9600 bps to 115.2 � Interrupt routing for flexibility kbps. The ports provide backdrive protection as well as ESD protection according to IEC 1000, level 3; � 768 words available in serial EEPROM for user contact discharge of ±6 kV, and air–gap discharge � Watchdog timer with 1.6 seconds timeout, of ±8 kV. software controlled An optional network interface module (NIM) con- � Power management, for battery–operated verts COM2 into an opto–isolated RS–422/485 inter- environments face. The NIM mounts directly on the 6030 without � Boots from on–card solid state disk or floppy any cables or external power required. DRIVES: MOUNTING: � Solid–state disk 0 (SSD0), 1 MB flash contains soft- � You can panel mount the 6030 using eight #4–40 ware, with 512 KB available to user; appears as hard standoff and screws (not provided). The 6030 user’s drive to system manual shows the center–to–center mounting hole dimensions. � Solid–state disk 2 (SSD2), 128 KB SRAM for data storage with battery backup; appears as hard drive to system � Floppy interface through LPT1 22 6510 W. 91st Avenue • Westminster CO 80031 • 303-430-1500 www.octagonsystems.com I/O: MOUNTING: � Four eight–wire serial ports, 16C550 compatible, � Micro PC card cage or ISA expansion bus RS–232, 16–byte FIFO buffered, ESD protected � Panel mounted with standoffs � RS–422 and RS–485 available on COM2 with use of network interface module (NIM) ORDERING INFORMTION � LPT1 port with multifunctional capability #4720 6030 PC microcontroller, manual and utilities #3656 5420 SVGA provides CRT support in the USER INTERFACE: Micro PC form factor � CRT through Micro PC expansion card #5782 5445 SVGA provides CRT support in the Micro PC form factor � PS/2 keyboard (requires custom cable or breakout board) ACCESSORIES � Speaker port #2746 VTC–9F, serial cable, 10–pin female � Serial console through COM1 to host computer #2472 VTC–9M, serial cable, 10–pin male #2470 Null modem adapter #4808 PCA–36, Centronics printer cable, 36–in. CONNECTORS: #4697 BOB Breakout board, providing LPT, PS/2 key- � 10–pin connector for each COM port; Octagon cable board, AT battery, and two opto–isolated inputs provides standard DB–9 interface #4810 CMA–34–18 connects 34–pin auxiliary connec- � 2–pin connector for power, 4–pin connector for tor to breakout board (BOB) AT battery � Auxiliary I/O connector is 34–pin header; an option- al breakout board provides LPT1, keyboard, and AT battery through this connector Functional diagram ENVIRONMENTAL: � AT battery port for real time clock (no battery neces- Sys clock FPGA sary for operation) (glue logic) DRAM � Size: 4.5” x 4.9”, Micro PC form factor CPU SSD0 Super I/O � Power: 5V ±0.25V @ 1.0A maximum; full 40 MHz operation 490 mA typical, suspend mode 200 mA SSD2 typical LPT � –40° to +85° C operating range at 25 MHz COM � 0° to +60° C operating range at 40 MHz 1/2/3/4 � Relative humidity 5 to 95%, noncondensing � Watchdog timer � Serial EEPROM � User jumper � User LED � Power management 33 6510 W. 91st Avenue • Westminster CO 80031 • 303-430-1500 www.octagonsystems.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 4720 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Octagon Systems 4010 CPU Boards. Low cost single board computer | Wide variety of embedded applicati...
Octagon System 4640 CPU Board - 6050 PC microcontroller is a 386–powered SBC with the essential I/O ...
Octagon Systems 4650 CPU Board - The PC–510 integrates PC architecture with industrial I/O, GPS supp...
Octagon Systems 4735 CPU Board - The 6010 PC microcontroller is a 386–powered SBC with the essential...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods