Table of Contents FRL Accessories & Options .................................................. 3-23 Digital Pressure Sensor/Digital Vacuum Sensor............................................................ 3-6 PS180 Pressure Switches...............................................................................7 PS181 Economy Series Pressure Switches .................................................................8 PS182 Pressure Switches...............................................................................9 Reclassifiers ........................................................................................10 Tank Drain Trap......................................................................................11 Electronic Drain Valves ................................................................................12 Inline Filters - L Series.................................................................................13 Micro-Filtration® Instrumentation Inline Filters........................................................... 14-17 Miniature Manifold Regulator ........................................................................ 18-19 Oxygen Concentrator Regulator...................................................................... 20-21 Gauges ............................................................................................22 Mounting Brackets ...................................................................................23 ©Numatics 2009 Rev. 2/06 Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 2 Numatics FRL Accessories and Options Digital Pressure Sensor/Digital Vacuum Sensor Application Numatics DPS and DVS is a line of digital pressure sensors designed for extremely accurate indication that proper system pressure is being achieved. Available for either vacuum (DVS model) or pressure (DPS model) applications, its highly visible LED display makes it easy to read in either dark or light areas. Other features include quick response (within 2.5ms or less), high repeatability (within 0.2% full scale 1 digit), easy pushbutton setup, and four output process modes which enable versatile pressure level control. Applications include securing chip-component carriages on a suction hand, controlling of clamp forces, controlling the edge of winding film, verification of frame uniformity, and many more. SPECIFICATIONS Pressure scale: Gauge pressure Rated pressure range: Pressure sensor: 0 - 145 PSI; Vacuum sensor: 0 - 14.7 PSI Setting pressure range: Pressure sensor: -0.050 to 1.000 MPa; Vacuum sensor:5.1 to -101.3 kPa Pressure resistance: Pressure sensor: 1.47 MPa; Vacuum sensor: 490 kPa Applicable fluid: Non-corrosive gas 2 2 Selectable units: Pressure sensor: kgf/cm , bar, PSI; Vacuum sensor: kgf/cm , bar, PSI, mmHg, InchHg Supply voltage: 12 to 24V DC (+10%/-15%) Ripple P-P 10% or less Current consumption: 50mA or less Comparative output: NPN open-collector transistor PNP open-collector transistor • Max. sink current: 100mA • Max. source current: 100mA • Applied voltage: 30V DC or less • Applied voltage: 30V DC or less • Residual voltage: • Residual voltage: 1V or less (@ 100mA sink current) 2V or less (@ 100mA source current) 0.4V or less (@ 16mA sink current) Utilization category: DC-12 or DC-13 DPS-180N (left) and DPSG180P (right) pictured Output pressure mode: Selectable with key operation - hysteresis mode, window comparator mode, dual output mode, or automatic setting mode Hysteresis: 1 digit (2 digits when using PSI unit, variable when using hysteresis mode) Repeatability: Within ± 0.2% F.S. ± 1 digit Response time: 2.5 ms or less Short circuit protection: Incorporated Analog voltage output: Output voltage: 1 to 5V (with rated pressure gauge) Zero-point: Within 1V ± 5%F.S. Span: Within 4V ± 5% F.S. Linearity: Within ± 1% F.S. Output impedance: App. 1kW Display: Red LED display, 3 1/2 digits (sampling cycle: 4 times/sec.) Pressure display range: Pressure sensor: -0.050 to 1.000 MPa; Vacuum sensor: 5.1 to -101.3 kPa Analog bar display: LED-bar step indication every app. 10% F.S. Operation indicator comparative output 1: Orange LED (lights up when the comparative output 1 is activated) comparative output 2: Green LED (lights up when the comparative output 2 is activated) Environmental resistance Pollution degree: 3 (Industrial environment) Protection: IP40 (IEC) Ambient temperature: 14º to 122ºF (-10º to +50º C) (No dew condensation or icing), Storage: 14º to 140ºF (-10º to +60ºC) Ambient humidity: 35-85% RH, Storage: 35-8% RH EMC: Emmision: EN50081-2, Immunity: EN50082-2 Voltage withstandability: 1,000V AC for 1 minute between all terminals connected and enclosure Insulation resistivity: 50kW or more at 500V DC Megger between all terminals connected and enclosure Vibration proof: 10-150Hz freq., 0.03 inch (0.75mm) amplitude, and X,Y,& Z directions each for 2 hours (unenergized) 2 Shock proof: 100m/s acceleration (app. 10G), and X,Y,& Z directions each for three times (unenergized) Temperature characteristic: Within ±1% F.S. of detection pressure at 68ºF (20ºC) in 14º-122ºF (-10º-+50ºC) temp. range Material: Front case: ABS; rear case: PPS (containing glass fiber); display surface: acrylic; press. port attachment: die-cast zinc alloy 2 Cable: Oil-resistant cabtyre cable 6.5 feet (2m) long w/ 5 0.15mm conductors Cable extension: Max. extension is 328 feet (100m) overall with an equivilant cable with 2 conductors 0.3 mm or more Weight: NPT/BSPT: 3.35 oz (95g); BSPP: 4.23 oz (120g) Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 3 Numatics FRL Accessories and Options Digital Pressure Sensor/Digital Vacuum Sensor – Model Selection 2 Meter Pigtail Cable PRESSURE SENSOR (0-145PSI;0-1.000MPa) VACUUM SENSOR (0 to -14.5PSI;0 to -101.3 kPa) MODEL DESCRIPTION MODEL DESCRIPTION DPS-180N NPN (sinking) 1/8 NPTF Base DVS-180N NPN (sinking) 1/8 NPTF Base DPS-180P PNP (sourcing) 1/8 NPTF Base DVS-180P PNP (sourcing) 1/8 NPTF Base DPSG180N NPN (sinking) 1/8 BSPP Base DVSG180N NPN (sinking) 1/8 BSPP Base DPSG180P PNP (sourcing) 1/8 BSPP Base DVSG180P PNP (sourcing) 1/8 BSPP Base DPSR180N NPN (sinking) 1/8 BSPT Base DVSR180N NPN (sinking) 1/8 BSPT Base DPSR180P PNP (sourcing) 1/8 BSPT Base DVSR180P PNP (sourcing) 1/8 BSPT Base * For NPTF flatback design as shown on BSPP models add an “F” to model number (Ex: DPS-180PF) 8 Inch Lead, 8 mm Pico Connector PRESSURE SENSOR (0-145PSI;0-1.000MPa) VACUUM SENSOR (0 to -14.5PSI;0 to -101.3 kPa) MODEL DESCRIPTION MODEL DESCRIPTION DPS-180N-1 NPN (sinking) 1/8 NPTF Base DVS-180N-1 NPN (sinking) 1/8 NPTF Base DPS-180P-1 PNP (sourcing) 1/8 NPTF Base DVS-180P-1 PNP (sourcing) 1/8 NPTF Base DPSG180N-1 NPN (sinking) 1/8 BSPP Base DVSG180N-1 NPN (sinking) 1/8 BSPP Base DPSG180P-1 PNP (sourcing) 1/8 BSPP Base DVSG180P-1 PNP (sourcing) 1/8 BSPP Base DPSR180N-1 NPN (sinking) 1/8 BSPT Base DVSR180N-1 NPN (sinking) 1/8 BSPT Base DPSR180P-1 PNP (sourcing) 1/8 BSPT Base DVSR180P-1 PNP (sourcing) 1/8 BSPT Base * For NPTF flatback design as shown on BSPP models add an “F” to model number (Ex: DPS-180P-1F) 8 Inch Lead, 12 mm Micro Connector PRESSURE SENSOR (0-145PSI;0-1.000MPa) VACUUM SENSOR (0 to -14.5PSI;0 to -101.3 kPa) MODEL DESCRIPTION MODEL DESCRIPTION DPS-180N-2 NPN (sinking) 1/8 NPTF Base DVS-180N-2 NPN (sinking) 1/8 NPTF Base DPS-180P-2 PNP (sourcing) 1/8 NPTF Base DVS-180P-2 PNP (sourcing) 1/8 NPTF Base DPSG180N-2 NPN (sinking) 1/8 BSPP Base DVSG180N-2 NPN (sinking) 1/8 BSPP Base DPSG180P-2 PNP (sourcing) 1/8 BSPP Base DVSG180P-2 PNP (sourcing) 1/8 BSPP Base DPSR180N-2 NPN (sinking) 1/8 BSPT Base DVSR180N-2 NPN (sinking) 1/8 BSPT Base DPSR180P-2 PNP (sourcing) 1/8 BSPT Base DVSR180P-2 PNP (sourcing) 1/8 BSPT Base * For NPTF flatback design as shown on BSPP models add an “F” to model number (Ex: DPS-180P-2F) Note: See accessories on page 5-6. Female Single Ended Cordset CONNECTOR TYPE CONNECTOR STYLE CONNECTOR LENGTH MODEL NUMBER M8 Pico Straight 2 Meters DPS-08-02-ST M8 Pico Straight 5 Meters DPS-08-05-ST M12 Micro Straight 2 Meters DPS-12-02-ST M12 Micro Straight 5 Meters DPS-12-05-ST Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 4 Numatics FRL Accessories and Options Digital Pressure Sensor/Digital Vacuum Sensor Dimensions NPTF/BSPT model BSPP model Mounting Bracket* (UZU811) Assembled dimensions Panel Mounting Bracket with Protective Cover* (Panel mounting bracket: UZU812; Front protective cover: UZU813) Panel cutout dimensions: 1.417 (36) x 1.417 (36) In inches (millimeters in parenthesis) * available only on NPTF/BSPT model Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 5 Numatics FRL Accessories and Options Digital Pressure Sensor/Digital Vacuum Sensor – Options (NPTF & BSPT models only) Panel Mounting Bracket and Front Protective Cover Front Protective Panel Mounting Cover - UZU813 Bracket - UZU812 NOTE: Front protective cover used with panel mounting bracket cannot be used alone. Sensor Mounting Bracket Part # UZU811 Two M4 pan head screwes and two spring washers included. Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 6 Numatics FRL Accessories and Options PS180 Pressure Switches Application Numatics PS180 is a line of pressure switches designed for accurate indication that proper system pressure is being achieved. Available in 1/8 or 1/4 threads, ® it is easily incorporated into an air system using a FlexiBlok diverter plate of other manifold. Featuring a rugged housing made from zinc coated steel, the PS180 is designed for industrial multi-million cycle life applications. The four pin connector plug is included and contains a key way preventing accidental misconnection. Pressure adjustment is tamper resistant, hindering unauthorized changes. It can be wired in either normally open or normally closed configurations and includes a case ground pin. Specifications Contact Rating: 4A @ 250 V AC Protection: IP 65, terminals IP00 Maximum Operation: 200/min Temperature Range: 0º F to 190º F (-15º C to 85º C) Maximum Pressure: 300 PSI (20 bar) Maximum Voltage: 250 V AC (200 DC) Hysteresis Adjustment: 15% Connector Material: polyamid Diaphragm Material: Buna N Housing Material: zinc plated steel Dimensions in inches (millimeters in parenthesis) NPTF Thread Dimensions MODEL A B C PS180BAN01 2.5 (64) 1.0 (27) 3.1 (79) ANSI SYMBOL PS180CAN01 2.5 (64) 1.0 (27) 3.1 (79) PS180BAN02 2.5 (64) 1.0 (27) 3.1 (79) PS180CAN02 2.5 (64) 1.0 (27) 3.1 (79) BSPP Thread Dimensions MODEL A B C PS180BAG02 2.3 (58) 1.0 (27) 2.9 (74) PS180CAG02 2.3 (58) 1.0 (27) 2.9 (74) NPTF Thread Model Selection NPTF MODEL PSIG (BAR) 1/8 PS180BAN01 4-20 (.3-1.5) 1/8 PS180CAN01 14-150 (1-10) 1/4 PS180BAN02 4-20 (.3-1.5) 1/4 PS180CAN02 14-150 (1-10) BSPP Thread Model Selection BSPP MODEL PSIG (BAR) 1/4 PS180BAG02 4-20 (.3-1.5) 1/4 PS180CAG02 14-150 (1-10) Use “G” suffix for gold plated terminals (for applications below 50 mA), i.e.PS180BAN02G Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 7 Numatics FRL Accessories and Options PS181 Economy Series Pressure Switches Application Numatics PS181 is the most economical of the Numatics Pressure Switch line. Available in 1/8 or 1/4 NPT and BSPP threads, it is easily incorporated into an air system using a FlexiBlok diverter plate or diverter block. Unlike the PS180 Switch, which uses a plug mount for the electrical connection, the PS181 directly connects to the body mounted terminals. Pressure adjustment is tamper resistant, hindering unauthorized changes. It can be wired in either a normally open or normally closed configuration. Specifications Hysteresis Adjustment 15% Pressure Ranges: 4 - 20, 14-150 psi Max Pressure: 300 psi Set Point Tolerance: +/- 1 Psi or 5% *Contact Rating: 4A @ 250 V AC Diaphragm Material: Buna N Max Operating Cycles: 200/min Temperature Range: 0 to 190 F (-15 to 85 C) Maximum Voltage: 250 V AC Sealing/Protection: IP 65, terminals IP 00 Housing Material: Zinc Plated Steel Connector Material: Polyamide Dimensions in inches (millimeters in parenthesis) ANSI SYMBOL NPTF Thread Model Selection NPTF MODEL PSIG (BAR) 1/8 PS181BAN01 4-20 (0.3-1.5) 1/8 PS181CAN01 14-150 (1-10) 1/4 PS181BAN02 4-20 (0.3-1.5) 1/4 PS181CAN02 14-150 (1-10) BSPP Thread Model Selection BSPP MODEL PSIG (BAR) 1/4 PS181BAG02 4-20 (0.3-1.5) 1/4 PS181CAG02 14-150 (1-10) PS181 Switch All Models No Longer Available Replaced By PS182 Switches Next Page Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 8 Numatics FRL Accessories and Options PS182 Pressure Switches Application Numatics PS182 is the most rugged of the Numatics Pressure Switches. Available in 1/8 or 1/4 NPT and BSPP threads, it is easily incorporated into an air system using a FlexiBlok diverter plate or diverter block. The unique 12 mm, micro connector makes it simple for electrical connection. The knurled knob with tamper resistant hex screw makes it the easiest pressure adjustment on the market. It can be wired in either a normally open or normally closed configuration. Specifications Hysteresis Adjustment 10% Pressure Ranges: 2-10, 6-30, 20-130 Max Pressure: 600 psi Set Point Tolerance: +/- 1 Psi or 5% *Contact Rating: 4A Diaphragm Material: Buna N Max Operating Cycles: 200/min Temperature Range: -40 to 250 F (-40 to 121 C) Voltage Range: 12 V DC to 250 V AC Sealing/Protection: IP 65 Housing Material: Brass Electrical Connection: 3-Pin Micro (12 mm) *Comes standard with gold plated contacts. Dimensions in inches (millimeters in parenthesis) ANSI SYMBOL NPTF Thread Model Selection NPTF MODEL PSIG (BAR) 1/8 NPT PS182AAN01 2-10 (0.14–0.69) 1/8 NPT PS182BAN01 6-30 (0.40-2.07) 1/8 NPT PS182CAN01 20-130 (1.38-8.96) 1/4 NPT PS182AAN02 2-10 (0.14–0.69) 1/4 NPT PS182BAN02 6-30 (0.40-2.07) 1/4 NPT PS182CAN02 20-130 (1.38-8.96) BSPP Thread Model Selection BSPP MODEL PSIG (BAR) 1/8 BSPP PS182AAG01 2-10 (0.14–0.69) 1/8 BSPP PS182BAG01 6-30 (0.40-2.07) 1/8 BSPP PS182CAG01 20-130 (1.38-8.96) 1/4 BSPP PS182AAG02 2-10 (0.14–0.69) 1/4 BSPP PS182BAG02 6-30 (0.40-2.07) 1/4 BSPP PS182CAG02 20-130 (1.38-8.96) Female Single Ended Cordset CONNECTOR CONNECTOR MODEL TYPE LENGTH NUMBER 90° Elbow 5 Meters PS182-5-90 Straight 5 Meters PS182-5-ST Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 9 Numatics FRL Accessories and Options Reclassifiers Application The Numatics Reclassifier is an exhaust coalescing filter/silencer. Its design removes oil mist and reduces noise from exhaust ports on pneumatic air valves, cylinders, and air control systems at extremely high flow rates The Numatics Reclassifier can be mounted to exhaust ports on any valve or manifold using a common exhaust base or by combining exhaust ports. Mounting it vertically fully utilizes the oil-catching sump surrounding the filter element and provides easy draining. Features • 99% oil removal efficiencies • top performer in automated paint systems • 25 dBA noise reduction • 1 micron filtration • high exhaust flow rates • manual or continuous drain option • low differential back pressures • metric threads available Specifications Maximum temperature: 125º F (52º C) CV rating (30 Series): 6 Maximum pressure: 100 PSIG (7 bar) CV rating (40 Series): 10 Air Flow vs. Back Pressure Air Flow vs. Sound Level H40-08 pictured Reclassifiers Dimensions ➤ Element Replacement Kits top dimensions = inches includes filter element only bottom dimensions (in parenthesis) = millimeters kit # description EKF30H 30 Series, 1 micron coalescer EKF40H 40 Series, 1 micron coalescer MODEL A B H30-04 2.5 7 (64) (178) ➤ Bowl Replacement Kits includes bowl and o-ring H30-06 2.5 7 kit # description (64) (178) BKF30 30 Series, polycarbonate bowl H40-08 3.75 7.245 BKF30C 30 Series, CircleVision™ bowl (95) (184) BKF30M 30 Series, metal bowl H40-10 3.75 7.245 BKC40 40 Series, polycarbonate bowl (95) (184) How to Order H 30- 04 M H 40- 08 Threads Options Port Size - = NPTF C = CircleVision™ Sight Bowl 08 = 1 G = G Tap (BSPP) 10 = 1-1/4 M = Metal Bowl Port Size Threads 04 = 1/2 - = NPTF 06 = 3/4 G = G Tap (BSPP) Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 10 Numatics FRL Accessories and Options Tank Drain Trap Application The Numatics Heavy Duty Tank Drain Trap is designed to automatically expel condensed moisture and compressor carryover liquids with a float design from compressed air systems, without the use of electricity, whenever liquids accumulate. Features • CircleVision™ bowl allows 360º view • Heavy duty drain prevents clogging • Pushbutton manual override Specifications Maximum Pressure: 250 PSIG (17 bar) Minimum Pressure: 30 PSIG (2 bar) Bowl Capacity: 8.5 oz Dimensions J30-06CH pictured How to Order � ��� �� �� ��������� �� � ��� �� � ��� ������� � � ���� �� ������������ Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 11 Numatics FRL Accessories and Options Electronic Drain Valves Application Dimensions Eliminate the manual draining of air lines with the EDV Series Electronic Drain Valve from Numatics. The EDV Series valve is designed to remove condensation from filters, receiver tanks, separators, drip legs, drain traps, and dryers in electronically controlled intervals. The EDV valve is available in 1/4, 3/8, and 1/2 sizes. The large orifice allows even the largest rust and pipe scale particles to be easily expelled. Standard model includes a 110 volt AC solenoid, 6 ft (2 m) power cord, and grounded plug. An EDV valve can be installed virtually anywhere. Specifications EDV-04-110AC pictured Valve • Function: 2 way, NC, solenoid valve • Valve Design: pilot operated diaphragm valve • Port Sizes: 1/4, 3/8 • Orifice: 5/16” (8mm) 1.12 Cv 1/2” (12mm) 2.45 Cv • Operating Pressure: 20-300 PSIG (1.3-20 bar) • Solenoid: continuous duty • Mounting: any position • Body Material: brass Timer • Material: plastic polyamid • Interval Timer: 1-45 min. • ‘On’ Timer: .25-25 sec • Voltage: 12-230 V AC/DC • Frequency: 50/60 Hz • Power Rating: 10 watt • Enclosure: NEMA 4 / IP65 PORT SIZE A B C D • Ambient Temp: 130º F (55º C) 1/4,3/8 5.75 3.5 2.25 3.75 (146) (89) (57) (95) Lights 1/2 6.0 3.5 2.75 3.75 • Left Indicator: power on (152) (89) (70) (95) • Right Indicator: solenoid engineered dimensions in inches (millimeters in parentheses) How to Order ������ ������ ����� ������� ���� ���������������������� �� �� ������� � � ��� ������� � � ���� �� �� ��������� ��� �� � ��� ��� �� ���� �� � ��� ��������� � � �������������������������� �������������������� � � ����������������� Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 12 Numatics FRL Accessories and Options Inline Filters L Series L Series in-line filters are designed to protect small air tools such as grinders, impact wrenches, nut runners, screwdrivers or pneumatic components. It will extend component life and reduces downtime by preventing foreign particles from entering the tool. Therefore eliminating expensive tool repair. Its compact and lightweight anodized aluminum body can be easily installed directly inline before the tool or component. L Series inline filters can also be used in low-pressure hydraulic applications. They can remove debris or contaminates, hence decrease tool wear and improve system efficiency. The 40- micron filter element insures minimum pressure drop and can be easily replaced or cleaned. Drawings ANSI Symbol Flow B A Specifications Model L1MN L2MN L3MN L4MN L5MN Port Size 1/8” 1/4” 3/8” 1/2” 3/4” Overall Length (A) 2-3/16” 2-3/16” 2-5/16” 3-13/16” 3-7/8” HEX (B) 3/4” 3/4” 7/8” 1-1/2” 1-1/2” Material Body Anodized Aluminum Element Sintered Bronze (40 micron standard) 2 MAX Operating Pressure 300 PSI (21.1 ig./cm ) Operating Temperature 35~200˚F (1.6~93.3˚C) Flow Flow is based on 100 psi inlet and the Delta P shown below. Model 5 PSID 4 PSID 3 PSID 2 PSID 1 PSID L1MN Flow SCFM 21 19 18 13 6 L2MN Flow SCFM 37 24 20 15 10 L3MN Flow SCFM 33 26 24 19 10 L4MN Flow SCFM 150 95 80 50 20 L5MN Flow SCFM 195 188 165 130 25 Element Kits L1, L2, L3 MN EKL123 L4, L5 MN EKL45 Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 13 Numatics FRL Accessories and Options PL Series (Miniature Inline Series) Features • Max pressure at 125 PSI (8.6 BAR) • Max temperature at 125˚F (52˚ C) • Rugged polyurethane housing with dual barbs • Compatible with many chemicals • Depth-loading media provides long life • Dual barb for 1/4 and 1/8 ID soft tubing • "D" option for indication of oil in system Applications PLS-B pictured • Sensor Protection • Pneumatic Logic 1.69 • Exhaust Muffler 3.44 • Medical/ Pharmaceutical Flow Rates for PLS-B Pressure PSIG 10 20 40 60 80 100 125 1.09 (BAR) (0.68) (1.37) (2.75) (4.13) (5.51) (6.89) (8.62) Flow (SCFM*) 0.7 1 1.5 1.9 2.4 3 3.5 * Based on a 1.5 psid pressure drop Features • Max pressure at 125 PSI (8.6 BAR) • Max temperature at 125˚F (52˚ C) • Rugged nylon housing • Straight tang for push-on fittings • Depth-loading media provides long life Applications • Sensor Protection • Pneumatic Logic PLS-T pictured • Exhaust Muffler • Medical/ Pharmaceutical 3.43 Flow Rates for PLS-T 1.69 10 20 40 60 80 100 125 Pressure PSIG .25 (BAR) (0.68) (1.37) (2.75) (4.13) (5.51) (6.89) (8.62) 0.9 1.2 2 2.5 3.2 3.8 4.6 Flow (SCFM) 1.09 * Based on a 1.5 psid pressure drop How to Order PLS-BD Series Option PL = Plastic Inline D = Oil Indicating Dye Element Grades (remove if option is not required) R = .01 Micron Port Option S = 0.3 Micron T = 0.5 Micron B = Dual Barbed U = 1 Micron T = 1/4” Straight Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 14 Numatics FRL Accessories and Options PT Series (Miniature Inline Series) Features • Max pressure at 35 PSI (2.5 BAR) • Max temp at 125˚ F (52˚ C) • Rugged blue tinted nylon housing • Straight barb option • Depth-loading media provides long life Applications • Protection of miniature pneumatic components • Sampling devices PTS-B pictured • Small design areas • Exhaust muffler 2.71 1.11 Flow Rates for PTS-B Pressure PSIG 5 10 20 35 (BAR) (0.34) (0.68) (1.37) (2.41) 1.04 Flow (SCFH*) 20 25 28 38 STRAIGHT 1/4 WHITE NYLON * Based on a 1.5 psid pressure drop TUBE FITTING (2 PIECES) Features • Max pressure at 35 PSI (2.5 BAR) • Max temp at 125˚ F (52˚ C) • Rugged blue tinted nylon housing • Right angle barb option • Depth-loading media provides long life Applications • Protection of miniature pneumatic components • Sampling devices PTS-BN pictured • Small design areas • Exhaust muffler 2.15 Flow Rates for PTS-BN 1.11 Pressure PSIG 5 10 20 35 (BAR) (0.34) (0.68) (1.37) (2.41) 1.04 Flow (SCFH*) 18 23 26 35 * Based on a 1.5 psid pressure drop How to Order PTS-BD Series Option PT = Plastic Inline D = Oil Indicating Dye Element Grades (remove if option is not required) R = .01 Micron Port Option S = 0.3 Micron T = 0.5 Micron B = Straight 1/8 tube fitting U = 1 Micron BN = 90 Degree 1/8” tube fitting Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 15 Numatics FRL Accessories and Options PHD Series Features • Max pressure 100 PSIG (7 BAR) • Max temp 200˚F (93˚C) • 300˚F at 60 PSIG (4 BAR) (11˚C) • Rugged Polyester housing • Brass inserts • Inner support core which protects element from collapsing • Spin welded seal - no adhesives or chemicals • Thermally bonded end caps on elements • Extended version for longer filter life Applications • Medical concentrators • Intake filter PXD-02 PHD-02B • After filter for miniature desiccant beds • High flow pneumatic tools • Critical instrumentation protection PHD-02 Flow Rates Pressure PSIG 10 20 40 60 80 100 (BAR) (0.68) (1.3) (2.7) (4.1) (5.5) (6.8) PH*-02* Flow (SCFM*) 10 12.5 17 20 21 26 PX*-02* Flow (SCFM*) 12 15 19 23 26 30 * Based on a 1.5 psid pressure drop 1/4” Female 2.75 1/2” 2.75 ID Barb 1/4” Female 0.80 4.76 3.00 3.6 1/4” Female 1/4” Female 1/4” Female PXD-02 PHD-02 PHD-02B How to Order PHD-02B Port Option Series PH = Plastic High Flow HSG B = 1/2” barb on outlet only (remove for 1/4” NPT in and out) PX = Plastic Extended HSG Element Grade Port Tap Size B = 3.0 Micron Pleat 02 = 1/4 NPT D = 0.3 Micron Pleated HEPA E = 0.3 Micron Pleated ULPA Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 16 Numatics FRL Accessories and Options MF Series (Miniature Inline Series) Features • Aluminum construction • Replaceable element • Max pressure 150 PSIG (10 BAR) • Max temp 200˚F (111˚C) • Compact design • Miniature coalescing capability Applications • Miniature air tools • Abusive applications • Control panels • Outdoor applications Flow Rates for MF Pressure PSIG 10 20 40 60 80 100 150 (BAR) (0.68) (1.37) (2.75) (4.13) (5.51) (6.89) (10.34) MF05D-02 pictured Flow (SCFM*) 1.5 2.1 3.3 4.6 5.8 7 10 * Based on a 1.5 psid pressure drop 1.50 0.41 3.69 VALVE DRAIN ASSEMBLY How to Order MF05B-02 Port Option Series MF = Metal Filter 02 = 1/4” NPT In/Out Series 05 = Miniature Series Element Grades B = 5 Micron R = .01 Micron S = 0.3 Micron T = 0.5 Micron U = 1 Micron Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 17 Numatics FRL Accessories and Options Miniature Manifold Regulator MR02 Series Application The MR02 Series Miniature Manifold Regulator offers the flexibility neces- sary for many of today's applications. The MR02 Series allows several regulators to be chained together while maintaining a constant primary pres- sure to each regulator. A system equipped with the Miniature Manifold Regulator can help reduce operation costs by reducing unnecessary downstream pressures and improve efficiencies by keeping them in one, convenient location for easy adjustment. Features • Can be installed as an individual or manifold unit • Standard output pressure 0 -125 PSIG MR02R-01G pictured • 3 available outlet/gauge ports (one in front, one in back, and one in the bottom) shown assembled and individually • Integral mounting holes allow for easy panel mounting • Connects easily without adapters or independent manifold system • Standard 5 mm tamper resistant adjustment • High flow capability in relation to compact size (2.7" height x 1" square) • Relieving or non-relieving models Specifications P1 Ports: 1/8 NPTF ANSI ANSI Outlet/Gauge Ports: 10-32 UNF SYMBOL SYMBOL Temperature Range: 40 -120 F (4-50 C) (Relieveing) (Non-Relieveing) Max Inlet Pressure: 200 PSIG (14 Bar) Weight: .15 lbs (68 grams) **SCFM w/100 PSI inlet set @ 75: 5 scfm **SCFM w/100 PSI inlet set @ 60: 4 scfm **SCFM w/100 PSI inlet set @ 40: 3 scfm Body material: Aluminum ** based on a 25% pressure drop from set Optional Accessories ITEM PART NO. 23mm Gauge "G" Option NG23-M 10-32 - 1/8 NPTF Adapter 134-034 10-32 - 1/8 O.D Barb Fitting 134-236 10-32 - 1/4 O.D Barb Fitting 134-234 Each Regulator includes an R02K assembly kit which includes (1) 10-32 pipe plug, (1) 1/8 pipe plug, (1) P1 port o-ring, (2) connector screws How to Order ����� � ��� ����� ������� ��������������������� � � ����� � � �������� ������ � � �������� �� ��������� ����� �� � ��� ����������������� � � ��������� ���������������������������� � � ������������� ������� � � ���� � � ������������ � � ��������� Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 18 Numatics FRL Accessories and Options Miniature Manifold Regulator MR02 Series Product Cross Section Dimensions TOP FRONT BOTTOM SIDE Flow Ratings air flow Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 19 reduced pressure Numatics FRL Accessories and Options Oxygen Concentrator Regulator Application The 03 series specialty miniature regulator is designed for applications requiring precision control at a very low cost. Used primarily in OEM applications, the 03 series can be applied in applications using air, nitrogen, oxygen, water, and other inert gases/fluids. Its lightweight all plastic design allows use in many specialty environments. This regulator has been applied successfully in many different markets including: Oxygen: concentrators, analyzers, anesthesia Adhesive: Applicators, metering equipment Paint: spray systems, head control Water service: filtration, control, aeration Test equipment: leak test, air gauging, flow test Features • Flows accurate to 0.1 psi in low flow applications • Four spring ranges available as a standard. 0-15 psi, 0-30 psi, 0-60 psi, 0-100psi. • Relieving or non relieving models. • Tamper-resistant or adjustable designs available. • Body Design Features 101 /102 series • Barb fitting outlet designed for use with 1/4 inch id tubing allows fast assembly. • Threaded 1/8 supply is male eliminates extra fitting. • Tamperproof or preset knob. 201 / 202 series • Barb fitting outlet designed for use with 1/8 inch id tubing allows fast assembly. • Manifold inlet and outlet ports. • Quick assembly with fixed height dimension. • Tamperproof or preset knob. Specifications Temperature Range: 40-120F (4-50C) Max inlet Pressure: 150 PSIG (10bar) Weight: SCFM with 100psi inlet set at 75 psi: 70 lpm SCFM with 100psi inlet set at 60 psi: 50 lpm SCFM with 100psi inlet set at 40 psi: 30 lpm SCFM with 100psi inlet set at 10 psi: 10 lpm Body Material: Delrin Dimensions in inches (millimeters in parenthesis) R03N-101 R03N-102 Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 20 Numatics FRL Accessories and Options Oxygen Concentrator Regulator Dimensions in inches (millimeters in parenthesis) R03N-201 R03N-202 How to Order 101 R03 N - Series Model Oxygen Concentrator Regulator 101/102 = 1/8 NPT Bottom Connection (barb outlet, see drawings) Style 201/202 = Manifold Inlet/Outlet (see drawings) R = Relieveing N = Non-Relieveing Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 21 Numatics FRL Accessories and Options Application Gauges Numatics gauges are widely used on compressors, filter/regulators (‘piggy- backs’), water pumps, paint sprayers, and a variety of other applications for mea- suring the pressure of the air passing through the component. Numatics Liquid Filled pressure gauges provide maximum service life for your pneumatic gauge applications. Each glycerine filled model is designed to prevent harmful environments or severe vibration from causing premature gauge failure. Features • Utilizes a Power Flex movement with polyester segment, contributing to longer gauge life. • ABS (Acrylonitrile, Butadiene, Styrene) casing is ideal for rugged applications and harsh environmental conditions • Full view polycarbonate window for better dial visibility. Specifications All Numatics Gauges Sizes: 1.5”, 2” Case: Black ABS Composite GA300 pictured Ring: None Window: Polycarbonate Dial: Green, Red, and Black on White Background Pointer: Black Aluminum Socket: Brass Liquid Filled Gauges Liquid Used: Glycerine Connection: Center Back Mount Available Models Numatics Gauges MODEL FACE THREAD PRESSURE RANGE PRESSURE RANGE DIAMETER SIZE (PSIG) (BAR) GB005 2.0" 1/4 NPT 0-5 0-0.5 RB005 2.0" 1/4 BSPT 0-5 0-0.5 GB015 2.0" 1/4 NPT 0-15 0-1.0 RB015 2.0" 1/4 BSPT 0-15 0-1.0 GA030 1.5" 1/8 NPT 0-30 0-2.0 RA030 1.5" 1/8 BSPT 0-30 0-2.0 GA060 1.5" 1/8 NPT 0-60 0-4.0 214-194 pictured RA060 1.5" 1/8 BSPT 0-60 0-4.0 GA100 1.5" 1/8 NPT 0-100 0-7.0 RA100 1.5" 1/8 BSPT 0-100 0-7.0 GA160 1.5" 1/8 NPT 0-160 0-11.0 RA160 1.5" 1/8 BSPT 0-160 0-11.0 GA300 1.5" 1/8 NPT 0-300 0-20.0 RA300 1.5" 1/8 BSPT 0-300 0-20.0 GB030 2.0" 1/4 NPT 0-30 0-2.0 ANSI SYMBOL RB030 2.0" 1/4 BSPT 0-30 0-2.0 GB060 2.0" 1/4 NPT 0-60 0-4.0 RB060 2.0" 1/4 BSPT 0-60 0-4.0 GB100 2.0" 1/4 NPT 0-100 0-7.0 RB100 2.0" 1/4 BSPT 0-100 0-7.0 GB160 2.0" 1/4 NPT 0-160 0-11.0 RB160 2.0" 1/4 BSPT 0-160 0-11.0 GB300 2.0" 1/4 NPT 0-300 0-20.0 RB300 2.0" 1/4 BSPT 0-300 0-20.0 Numatics 14 Series Manifold Regulator Gauges MODEL FACE THREAD PRESSURE RANGE PRESSURE RANGE DIAMETER SIZE (PSIG) (BAR) GB060A 1.5" 1/4 NPT 0-60 0-4.0 RB060A 1.5" 1/4 BSPT 0-60 0-4.0 GB160A 1.5" 1/4 NPT 0-160 0-11.0 RB160A 1.5" 1/4 BSPT 0-160 0-11.0 Numatics Liquid-Filled Gauges MODEL FACE THREAD PRESSURE RANGE PRESSURE RANGE DIAMETER SIZE (PSIG) (BAR) 214-194 1.5” 1/8 0-160 0-11 214-195 2.0” 1/4 0-160 0-11 214-196 1.5” 1/8 0-60 0-4 Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 22 Numatics FRL Accessories and Options Mounting Brackets Panel Mount Nuts Application Panel mount nuts thread onto the Mounting brackets are used to fix a regulator, piggy- ® bonnet of the regulator to secure the back or FlexiBlok assembly to a panel as an alter- unit against the mounting bracket. native to the integral mounting holes located in the 22 ® and 32 Series FlexiBlok heads. They are also used as an alternative to a hard piped mounting system for the 12, 50, 70, 71, and 600 Series filter product lines. MODEL SERIES A B HOLE DIA. 1-3/4-18 PN10 71 Series Mini Stainless 1.38 (35) 1.25 (32) UNS-2B 1-3/16- PN12 12 Series FlexiBlok 1.5 (38) 1.25 (32) 16 PN22 22 Series FlexiBlok 1.5 (38) 1-1/4-16 1.31 (33) PN32P 32 Series FlexiBlok 2.05 (52) 1-3/4-16 1.77 (45) 1-3/4-18 PN70S 70 Series Stainless Steel 2.0 (51) 1.75 (44) UNS-2B Models and Dimensions BRK14AB Mounting Bracket for PK12, PK22 Mounting Bracket for 12 and 22 ® ® Series FlexiBlok Regulator and Piggyback 14 Series FlexiBlok Regulator and Piggyback includes bracket and panel mount nut (see panel mount nut includes left and right brackets, 2 left side bolts, and 2 right side dimensions below) nuts (see dimensions below) Series Model # Dimensions Kit # Dimensions A B C D E F G H I A B C D BRK14AB 2.78 .35 .4 .35 .6 .6 1.8 2.62 .73 12,22 PK12 & 1.05 1.19 1.75 .625 (71) (9) (10) (9) (15) (15) (46) (67) (19) PK22 (27) (30) (44) (16) The right bracket mounts using the bolts that are included with the unit the bracket is being mounted to. PK32 Mounting Bracket for BRK22AB Mounting Bracket for ® ® 32 Series FlexiBlok Regulator and 22 Series FlexiBlok Piggyback includes left bracket, right bracket, 2 right side bolts, 2 right side includes bracket and panel mount nut (see panel mount nut nuts dimensions below) Kit # Dimensions Series Model # Dimensions A B C D E F G A B C D E BRK22AB 1.57 .785 1.45 2.9 .4 3.5 1 (39) (20) (37) (74) (10) (89) (25) 32 PK32 2.75 .41 1.19 1.5 2.67 (70) (10) (30) (38) (68) dimensions shown for BRK22A. BRK22B is a mirror of BRK22A Drawing and/or dimensions subject to change PK88* Mounting Bracket for PK50, PK50A, PK50B Mounting Bracket for 50 Series High Flow Regulator R87 Series Ratio Relay Volume Booster and includes one bracket R88 Series High Flow Precision Regulator includes one bracket Port Kit # Dimensions Kit # Dimensions Size A B C D E F A B C D PK88 3 1.13 1.38 1.5 3 .4 2.25 1.19 1.88 .27 1/4 & 3/8 PK50A (76) (29) (35) (38) (76) (10) (57) (30) (48) (7) 2.25 1.06 1.88 .27 1/2 PK50B (57) (27) (48) (7) 2.94 1.75 3.25 .33 3/4 - 1 1/2 PK50 (75) (44) (83) (8) PK89* Mounting Bracket for PK610 89 Series Instrument Air Regulator 607,610 Series High Flow Filters includes one bracket includes one bracket Kit # Dimensions Kit # Dimensions A B C D E F A B C D E PK610 2.12 1.19 3.78 2.69 .88 .27 PK89 3 1.13 .375 1.12 .625 (54) (30) (96) (68) (22) (7) (76) (29) (10) (28) (16) * See individual Precision Pneumatic Control Product pages for additional mounting bracket information (pg 71). Information subject to change without notice. For ordering information or regarding your local sales office visit www.numatics.com. 23 WORLD HEADQUARTERS USA Numatics, Incorporated 46280 Dylan Drive Novi, Michigan 48377 P: 1-888-Numatics 1-888-686-2842 Canada Numatics, Ltd P: 519-452-1777 Mexico Numatics de Mexico S.A. de C.V. P: 52-222-284-6176 For a comprehensive listing of all Numatics production and distribution facilities worldwide, visit: www.numatics.com © Numatics Inc. 2008 LT-G3Catalog 1.0 10M-TGI-12/08