Manufacturers
NICHICON PCG1A102MCL1GS
Description
Nichicon PCG1A102MCL1GS Capacitor. 4800mArms Rated Ripple | 10V Rated Voltage | 1000uF Capacitance
Part Number
PCG1A102MCL1GS
Price
Request Quote
Manufacturer
NICHICON
Lead Time
Request Quote
Category
PRODUCTS - P
Features
- Compliant to the RoHS directive (2002/95/EC).
- Higher Capacitance, Low ESR, High ripple current.
- Load life of 2000 hours at 105°C.
- SMD type : Lead free reflow soldering condition at 260°C peak correspondence.
Datasheet
Extracted Text
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS Chip Type, Higher Capacitance CG series Higher Capacitance, Low ESR, High ripple current. Load life of 2000 hours at 105°C. SMD type : Lead free reflow soldering condition at 260°C peak correspondence. CG Compliant to the RoHS directive (2002/95/EC). Higher Capacitance CF Specifications Item Performance Characteristics Category Temperature Range –55 to +105°C Rated Voltage Range 2.5 to 16V Rated Capacitance Range 47 to 4700µF Capacitance Tolerance ±20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C (1) Less than or equal to the specified value 100kHz, 20°C ESR at Leakage Current ( 2) Less than or equal to the specified value. After 2 minutes' application of rated voltage at 20°C Temperature Characteristics Z+105°C / Z+20°C 1.25 (100kHz) Z–55°C / Z+20°C 1.25 (Max.Impedance Ratio) Capacitance change Within ± 20% of the initial capacitance value ( 3) The specifications listed at right shall be met when the tan δ 150% or less than the initial specified value Endurance capacitors are restored to 20°C after the rated voltage is ESR(1) 150% or less than the initial specified value applied for 2000 hours at 105°C. Leakage current ( 2) Less than or equal to the initial specified value Capacitance change Within ± 20% of the initial capacitance value ( 3) The specifications listed at right shall be met when the Damp Heat tan δ 150% or less than the initial specified value capacitors are restored to 20°C after the rated voltage is ESR(1) (Steady State) 150% or less than the initial specified value applied for 1000 hours at 60°C, 90% RH. Leakage current ( 2) Less than or equal to the initial specified value After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at Capacitance change Within ± 10% of the initial capacitance value ( 3) right, provided that it's temperature profile is measured at the tan δ 130% or less than the initial specified value capacitor top and the terminal. ESR(1) 130% or less than the initial specified value Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec. Leakage current ( 2) Less than or equal to the initial specified value The duration for over +230°C temperature at capacitor surface shall Resistance to not exceed 60 seconds. Soldering Heat In the case of peak temp, less than 250°C, reflow soldering shall be two times maximum. In the case of peak temp, less than 260°C, reflow soldering shall be once. Measurement for solder temperature profile shall be made at the capacitor top and the terminal. Marking Navy blue print on the case top 1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform. 2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120 minutes at 105°C. 3 Initial value : The value before test of examination of resistance to soldering. Type numbering system (Example : 6.3V 470µF) Dimensions Positive 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Plastic platform Capacitance Lot No. 0.3 MAX. C±0.2 P C G 0 J 4 7 1 M C L 1 G S Taping code Configuration Capacitance toleranc (±20%) +0.1 L Rated capacitance (470μF) -0.4 Voltage ( j:6.3v) Series Negative Rated voltage (6.3V) H Series name (mm) Type Size φ5 × 6L φ6.3 × 6L φ8 × 7L φ10 × 8L φ10 × 10L φ10 × 12.7L φD 5.0 6.3 8.0 10.0 10.0 10.0 L 5.9 5.9 6.9 7.9 9.9 12.6 A 6.0 7.3 9.0 11.0 11.0 11.0 B 5.3 6.6 8.3 10.3 10.3 10.3 Voltage C 5.3 6.6 8.3 10.3 10.3 10.3 V 2.5 4 6.3 10 16 E 1.6 2.1 3.2 4.6 4.6 4.6 Code e g j A C H 0.5 to 0.8 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 Dimension table in next page. CAT.8100B CG 470 j 841 φD + 0.5 MAX. B±0.2 E 0.5 MAX. A±0.2 CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CG series Standard Ratings Rated Voltage Surge Voltage Rated Capacitance Case Size Leakage Current ESR (mΩ) Rated Ripple tan δ Part Number (V)(code) (V) (μF) φD × L (mm) (μA) (at 100kHz 20°C) (mArms) 220 5 × 6 0.12 110 30 2100 PCG0E221MCL1GS 30 2200 PCG0E331MCL1GS 330 5 × 6 0.12 500 330 5 × 6 0.12 500 10 3300 PCG0E331MCO1GS 470 6.3 × 6 0.12 235 20 2900 PCG0E471MCL1GS 20 3000 560 6.3 × 6 0.12 280 PCG0E561MCL1GS 2.5 2.8 (0E) 820 8 × 7 0.12 410 20 3300 PCG0E821MCL1GS 1500 10 × 8 0.12 750 17 4100 PCG0E152MCL1GS 0.12 1350 12 4700 2700 10 × 10 PCG0E272MCL1GS 5500 3300 10 × 12.7 0.12 1650 10 PCG0E332MCL1GS 4700 10 × 12.7 0.12 2350 10 5600 PCG0E472MCL1GS 0.12 144 32 1900 180 5 × 6 PCG0G181MCL1GS 2000 220 5 × 6 0.12 300 32 PCG0G221MCL1GS 220 5 × 6 0.12 300 15 2900 PCG0G221MCO1GS 0.12 312 22 2700 390 6.3 × 6 PCG0G391MCL1GS 4 4.6 3200 680 8 × 7 0.12 544 21 PCG0G681MCL1GS (0G) 1200 10 × 8 0.12 960 17 4000 PCG0G122MCL1GS 0.12 1760 13 4600 2200 10 × 10 PCG0G222MCL1GS 5300 2700 10 × 12.7 0.12 2160 11 PCG0G272MCL1GS 3300 10 × 12.7 0.12 2640 11 5400 PCG0G332MCL1GS 150 0.12 189 33 1800 PCG0J151MCL1GS 5 × 6 33 1900 180 5 × 6 0.12 500 PCG0J181MCL1GS 180 5 × 6 0.12 500 17 3000 PCG0J181MCO1GS 270 0.12 340 23 2600 PCG0J271MCL1GS 6.3 × 6 23 2700 330 6.3 × 6 0.12 416 PCG0J331MCL1GS 6.3 7.2 (0J) 470 8 × 7 0.12 592 22 3100 PCG0J471MCL1GS 1000 10 × 8 0.12 1260 18 3800 PCG0J102MCL1GS 14 4400 1800 10 × 10 0.12 2268 PCG0J182MCL1GS 2200 10 × 12.7 0.12 2772 12 5000 PCG0J222MCL1GS 2700 10 × 12.7 0.12 3402 12 5100 PCG0J272MCL1GS 35 1700 82 5 × 6 0.12 164 PCG1A820MCL1GS 100 5 × 6 0.12 250 35 1800 PCG1A101MCL1GS 150 6.3 × 6 0.12 300 25 2500 PCG1A151MCL1GS 0.12 360 25 2600 180 6.3 × 6 PCG1A181MCL1GS 10 11.5 3100 330 8 × 7 0.12 660 23 PCG1A331MCL1GS (1A) 560 10 × 8 0.12 1120 20 3600 PCG1A561MCL1GS 0.12 1640 15 4300 820 10 × 10 PCG1A821MCL1GS 4800 1000 10 × 12.7 0.12 2000 13 PCG1A102MCL1GS 1500 10 × 12.7 0.12 3000 13 4900 PCG1A152MCL1GS 0.12 150 40 1500 47 5 × 6 PCG1C470MCL1GS 1600 56 5 × 6 0.12 240 40 PCG1C560MCL1GS 82 6.3 × 6 0.12 262 30 2300 PCG1C820MCL1GS 0.12 320 30 2400 100 6.3 × 6 PCG1C101MCL1GS 16 18.4 2800 150 8 × 7 0.12 480 28 PCG1C151MCL1GS (1C) 270 10 × 8 0.12 864 25 3300 PCG1C271MCL1GS 470 0.12 1504 20 3700 PCG1C471MCL1GS 10 × 10 18 4100 680 10 × 12.7 0.12 2176 PCG1C681MCL1GS 820 10 × 12.7 0.12 2624 18 4200 PCG1C821MCL1GS Rated ripple current (mArms) at 105°C 100kHz Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please refer to page 3 for the minimum order quantity. CAT.8100B
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the PCG1A102MCL1GS have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods