Elite.Parts

Description

Nexcom EBC-300 Series 3.5" Wafer Low Power Embedded Board Celeron M 600MHZ, Intel 852GM Chipset with PC 104+, up to 256MB DDR, VGA, Gb LAN, 6x USB, 8x GPIO

Part Number

EBC 300

Price

Request Quote

Manufacturer

NEXCOM

Lead Time

Request Quote

Category

EMBEDDED COMPUTING » 5.25" CPU BOARDS

Specifications

BIOS

Award system BIOS; ACPI-Only supports Software Shutdown by 5 Vsb Provided (S0 /S5 only); Advanced Power Management support; 4Mbit flash ROM; Supports Pentium M Speed Step (Customized by Nexcom); Supports Automatic Power On Function

Certifications

CE approval; FCC Class A

Compactflash

1x Internal CompactFlash socket; Support One Type I& II Compact Flash Card (Primary Master)

CPU

Supports Intel® Celeron® M 600 MHz processor with 512 KB L2 cache and 400 MHz FSB; Support for Intel® Pentium® M processor or Intel® Celeron® M processor in 478-pin, Micro-FCPGA package (mPGA479M Socket)

Dimensions

3.5" form factor, 146 mm (L) x 105 mm (W) (5.7" x 4.1")

Display Interface

Intel® 852GM integrated graphics solution w/ Intel Extreme Graphics 2 technology; Up to 64 MB of dynamic video memory allocation; 350 MHz integrated 24-bit RAMDAC that can drive a standard progressive scan analog monitor with pixel resolutions up to

Ethernet

Realtek RTL 8110SC Gigabit Ethernet Controller; 1 x RJ45 with LED; Supports PXE LAN boot ROM for Ethernet Boot up; Supports Wake on LAN (When 5 Vsb power available)

GPIO

8 GPIO lines via header (GPI 0 ~ 3 and GPO 0 ~ 3)

IDE

1 x 44-pin IDE connector

Memory

On-board 256 MB Non-ECC DDR SDRAM memory

Operating Temperature

0°C to 60°C

Power Supply

Supports both AT and ATX Mode (Factory default setting is AT mode) CPU: P-M 1.7 G Memory: On board DDR 256 MB:+12V +5V; Full-Loading Mode(A):0.2 A 6.2A; Light loading Mode(A):0.2A 2.5A. NOTE:1.Full Loading: Utilize CPU 100% with Burn-in test running.

Processor

Intel Pentium M

Relative humidity

Operating 10% to 90%, non-condensing; Non-operating 5% to 95%, non-condensing

RTC

On-chip RTC with battery back up; 1 x External Li-Ion battery - The battery socket is in flat direction; Tolerance less than 2 sec (24 hours) under 25°C environment

Serial Port

1 port, with 16 C550 UARTs, 1 x DB-9 Connector

Storage temperatures

-20°C to 85°C

System Chipset

Intel® 852GM 400 MHz; Intel® ICH4

System Monitor

Derived from Super I/O to support system voltage, fan speed, temperature monitoring

USB 2.0

6 ports, with two direct output, four from 1x6 JST; On-board 3-pin header for I2C, one pin for GND; On-board 2-pin header for Reset switch

Features

Audio with Speaker-out, Line-in and Mic-in
Intel® 852GM and ICH4 Chipset
On-board 256 MB DDR Memory
On-board Intel® Celeron® M 600 MHz Processor with 512 KB L2 Cache
Realtek RTL 8110SC Gigabit Ethernet Controller
Supports LVDS/ 6 x USB 2.0

Datasheet

Nexcom-EBC-300-datasheet-10385435551.pdf

178 KiB

Download

Extracted Text

® ® EBC 300 3.5" On-board Intel Celeron M 600 MHz CPU or socket P-M/C-M CPU with GBe LAN VGA LAN Mic-In and Speaker Out COM 2 x USB ® ® Pentium M/Celeron M PCI 104 852GM ICH-4 POWER IDE USB x 4 Onboard DDR 256MB Main Features ® ® On-board Intel Celeron M 600 MHz Processor with 512 KB L2 Realtek RTL 8110SC Gigabit Ethernet Controller Cache Audio with Speaker-out, Line-in and Mic-in ® Intel 852GM and ICH4 Chipset Supports LVDS/6 x USB 2.0 On-board 256 MB DDR Memory Product Overview ® ® ® ® The EBC 300 is a 3.5" embedded board with an on-board Intel Celeron M 600 MHz processor with 512 KB L2 cache or socket Pentium M/Celeron M with 400 MHz FSB ® The EBC 300 features Intel 852GM and ICH4 chipsets, which supports DDR 200/266 memory, along with integrated graphics with 64 MB shared memory to support CRT and LVDS function. The South Bridge ICH4 provides a 44-pin IDE connector, CompactFlash socket, two serial ports, six USB 2.0 ports, one Gigabit Ethernet LAN port, and an audio interface. The EBC 300 is a great solution featuring a low power consumption processor with versatile display and numerous I/O port support. SpeciŢ cations On-board LAN CPU Support ® ® Supports Intel Celeron M 600 MHz processor with 512 KB L2 cache and 400 Realtek RTL 8110SC Gigabit Ethernet Controller MHz FSB 1 x RJ45 with LED ® ® ® ® Support for Intel Pentium M processor or Intel Celeron M processor in Supports PXE LAN boot ROM for Ethernet Boot up 478-pin, Micro-FCPGA package (mPGA479M Socket) Supports Wake on LAN (When 5 Vsb power available) Main Memory Display On-board 256 MB Non-ECC DDR SDRAM memory ® ® Intel 852GM integrated graphics solution w/ Intel Extreme Graphics 2 technology, up to 64 MB of dynamic video memory allocation Chipset Analog VGA Interface: ® Intel 852GM 400 MHz 1 x DB15 VGA port, 350 MHz integrated 24-bit RAMDAC that can drive a ® Intel ICH4 standard progressive scan analog monitor with pixel resolutions up to 1600 x 1200 at 85 Hz, 2048 x 536 at 75 Hz BIOS LVDS Interface: Award system BIOS DF13 20-pin LVDS connector for internal connection, supports single (18bit/24bit) LVDS panel, wide screen resolution up to 848 x 480 and ACPI: Only supports Software Shutdown by 5 Vsb Provided (S0/S5 only) 1366 x 768 Advanced Power Management support 4 Mbit ﬂ ash ROM ® Supports Pentium M Speed Step (Customized by Nexcom) Supports Automatic Power On Function 3.5” CPU Boards www.nexcom.com Block Diagram Intel® Pentium® M / Celeron® M processor FSB 400MHz RGB Signal CRT OUTPUT DDR 266 MHz Intel DDR (On board) 82852GM 18bit or 24 bit LVDS OUT DMI AC'97 CF IDE CODEC (Primary) (Secondary) PATA AC'97 Intel PCI 32Bit 33MHz USB2.0 6 x USB 82801DB ICH4 LPC 33MHz LAN PCI104 RTL8110SC IT8712 SIO FWH RJ45 CON 1 x SIO I/O Interface Dimensions Serial port: 1 port, with 16 C550 UARTs, 1 x DB-9 Connector 3.5" form factor 146mm (L) x 105mm (W) (5.7" x 4.1") USB 2.0: 6 ports, with two direct output, four from 1x6 JST On-board 3-pin header for I2C, one pin for GND Environment On-board 2-pin header for Reset switch Operating temperatures: 0°C to 60°C 8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5 V) Storage temperatures: -20°C to 85°C On-board Power LED and HDD Active LED Pin Header Relative humidity: Operating 10% to 90%, non-condensing; Non-operating 5% Reserved 1 x 3-pin fan connector (for CPU) to 95%, non-condensing 1 x PCI 104 connector Certiﬁ cations On-board RTC CE approval On-chip RTC with battery back up FCC Class A 1 x External Li-Ion battery The battery socket is in ﬂ at direction. Ordering Information Tolerance less than 2 sec ( 24 hours ) under 25°C environment EBC 300-C65-256M (P/N: 10E00030004X0) RoHS Compliant Storage ® Low Power Embedded Board with Celeron M 600 MHz 512 KB L2 on-board 1 x CF Internal socket, supports One Type I& II Compact Flash Card (Primary with VGA/LVDS/Audio/COM/USB 2.0/Gigabit LAN Master) EBC 300-SKT-256M (P/N: 10E00030003XO) RoHS Compliant 1 x IDE 44-pin connector ® ® Low Power Embedded Board with Pentium M/Celeron M CPU socket with System Monitor VGA/LVDS/Audio/COM/USB 2.0/Gigabit LAN Derived from Super I/O to support system voltage, fan speed, temperature Packing List monitoring Part No. Description 60233USB59X00 USB CABLE Power Requirements 60233POW73X00 POWER CABLE (2x10 TO 2x5 ) Supports both AT and ATX Mode (Factory default setting is AT mode) 60233IDE86X00 IDE CABLE 44P TO 40P CPU: P-M 1.7 G +12 V +5 V Memory: On board DDR 256 MB Full-Loading Mode (A) 0.2 A 6.2 A Light loading Mode (A) 0.2 A 2.5 A NOTE: 1. Full Loading: Utilize CPU 100% with Burn-in test running 2. Light Loading: Utilize CPU loading below 5% without data or application running. 3.5” CPU Boards We reserve the right to change speciﬁ cations and product descriptions at any time without prior notice. Last update: 05/25/2010

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products