Elite.Parts

Description

Nexcom EBC-583 Series 5.25" Embedded Single Board Computer VIA Eden/C7, CN700 & 8237 R+ Chipset w/LVDS, 2x SATA RAID, 3x GBE LAN, up to 512MB SDRAM, 6x USB 2.0

Part Number

EBC 583

Price

Request Quote

Manufacturer

NEXCOM

Lead Time

Request Quote

Category

EMBEDDED COMPUTING » 5.25" CPU BOARDS

Specifications

Analog VGA Interface

1 x DB-15 connector for CRT; Supports max resolution 1600x1200 at 85 Hz

Audio Interface

AC' 97; one 2x5-pin header (for NEXCOM EBK AC97)

BIOS

AWARD System BIOS; 4 Mbit Flash ROM

Board Type

5.25 in

Certifications

CE approval; FCC Class A

Chipset

VIA CN700; VIA 8237R+

CPU

VIA Eden™/C7 with V4bus@400MHZ Processors support CPU Speed from 400MHZ ~ 1.5GHZ

Dimensions

5.25" form factor, 203mm(L) x 146mm(W) (7.9" x 5.7")

Display Interface

VIA CN700 Integrated UniChrome Pro 3D/2D Graphics & Video Controller; Supports 16/32/64 MB Frame Buffers size; 64 MB VGA shared memory

Ethernet

3 x Realtek RTL8139C+ (L)10/100 Fast Ethernet Controller; Supports PXE LAN boot ROM for Ethernet Boot up; Supports Wake on LAN (LAN 1 only); Interface - 3 x RJ45 connector

Expansions

1 x PCI slot (support up to 2 x PCI device )

GPIO

8 GPIO lines via header (4 IN and 4 OUT); TTL Level (0/5V)

I/O

3 x FAN WAFER connector for CPU and Chassis; 12C - 1 x pin header; 1 x on board buzzer; 1 x 2-pin header for reset; 1 x 2-pin header for ATX power switch; 3-pin JST for the optional Power (5Vsb, PS_ON, GND) Input

IrDA

1 x pin header for IrDA,TX,RX

Memory

1 x 184-pin DIMM Socket, up to 1GB un-buffered non-ECC DDR 333/400 SDRAM

Operating Temperature

0°C to 60°C

Parallel Ports

2x13-box header(2.0mm), Bi-directional, EPP/ECP

Power Consumption

CPU-On Board VIA Eden (Source #2) 800MHz; Memory-1 x DDR 256MB:+12V +5V; Full-Loading Mode-0.70A 3.19A; Light-Loading Mode-0.74A 2.90A. NOTE:1.Full Loading: Utilize CPU 100% with Burn-in test running. 2.Light Loading: Utilize CPU loading below 5%

Power Supply

Supports both AT and ATX Mode (Factory default setting is AT mode)1 x 3-pin header for AT/ATX mode switch, +3.3V is converted from +5V, 1 x Power Input Connector, 1 x Jst connector to receive the 5Vsb input from Power Source;

Processor

VIA C7

PS/2

1 x external Mini-Din (or internal 2x4-pin header) for Keyboard/Mouse

Relative Humidity

10% to 90%;(Non-condensing)

RTC

On chip RTC with battery back up; 1 x External Li-ion Battery

Serial Ports

2 x ports, with DB9, 2x5-pin header

Storage

SATA x 2 ports, support RAID 0; 1 x 44-pin IDE connector; support Ultra ATA 33/66/100; 1 x internal CF socket

Storage Temperature

-20°C to 80°C

USB

USB 2.0 x 6; with1x6 JST(2.0mm)

Watchdog Timer

Watchdog Timer is programmable by software from 1 to 64

Features

2 x SATA, Supports RAID 0, 1
3 x Realtek 8139C+(L) 10/100 Ethernet
6x USB 2.0
Supports CompactFlash
Supports One PCI Slot Expansion
Supports SATA/IDE 2.5" HDD
VIA CN700 and 8237R+ Chipsets
VIA Eden™/C7 with V4bus@400MHZ Processors Support CPU Speed from 400MHZ~1.5GHZ
Watchdog Timer

Datasheet

EBC58-2376367903.pdf

1011 KiB

Download

Extracted Text

5.25" VIA Eden™/ C7 Embedded CPU Board EBC 583 with SATA RAID/ 3 x LAN VIA CN700 PCI VIA 8237R+ CF LAN 3 AC'97 interface LAN 2 LAN 1 VGA Parallel Port PS/2 connector DDR DIMM VIA,C7-D 1.5GHz COM Power Input Connector USB 44-pin IDE SATA Main Features VIA Eden™/C7 with V4bus@400MHZ Processors Support CPU Supports CompactFlash and SATA/IDE 2.5" HDD Speed from 400MHZ~1.5GHZ Supports One PCI Slot Expansion VIA CN700 and 8237R+ Chipsets 2 x SATA, Supports RAID 0, 1 3 x Realtek 8139C+(L) 10/100 Ethernet Product Overview The EBC 583 is a 5.25" embedded board computer supports VIA Eden™ or VIA C7 with V4 bus processors with different frequencies and L2 caches, which contribute up to 40% of performance upgrade compare to VIA C3 family. Incorporates VIA CN700 and 8327R+ chipsets, the EBC 583 supports main stream un-buffered non-ECC DDR 333/400 with maximum memory size up to 1GB. The low power consumption of South Bridge 8327R+ supports one standard 32-bit/33MHz PCI slot, parallel port, 44-pin IDE connector, Compact Flash socket, and versatile I/O ports, such as serial ports, and USB 2.0 ports. The EBC 583 and EBC 563 are mechanical compatible. In addition, they share most of the major components and can fi t into existing Chassis design. To ensure the software compatibility, the Ethernet Controller on EBC 583 follows original RTL8139C+ RoHS version and design. Speciﬁ cations CPU Support Display VIA Eden™/C7 with V4bus@400 MHZ Processors support CPU Speed from VIA CN700 Integrated UniChrome Pro 3D / 2D Graphics & Video Controller 400 MHZ ~ 1.5 GHZ Supports 16/32/64 MB Frame Buffers size 64 MB VGA shared memory Main Memory Interface:1 x DB-15 connector for CRT 1 x 184-pin DIMM Socket, up to 1GB un-buffered non-ECC DDR 333/400 Supports max resolution 1600x1200 at 85 Hz SDRAM Audio Chipset AC' 97 Interface: one 2x5-pin header ( for NEXCOM EBK AC97) VIA CN700 VIA 8237R+ I/O interface USB 2.0: 6 x USB2.0, with1x6 JST(2.0mm) BIOS Serial ports: 2 x ports, with DB9, 2x5-pin header AWARD system BIOS Parallel ports: 2x13-box header(2.0mm), Bi-directional, EPP/ECP 4 Mbit Flash ROM PS/2: 1 x external Mini-Din ( or internal 2x4-pin header) for Keyboard/Mouse GPIO: 8 GPIO lines via header (4 IN and 4 Out ); TTL Level (0/5V) On-board LAN FAN: 3 x FAN WAFER connector for CPU and Chassis 3 x Realtek RTL8139C+ (L)10/100 Fast Ethernet Controller IrDA: 1 x pin header for IrDA,TX,RX Supports PXE LAN boot ROM for Ethernet Boot up I2C: 1 x pin header Supports Wake on LAN (LAN 1 only) 1 x on board buzzer Interface: 3 x RJ45 connector 5.25” CPU Boards Block Diagram VIA Eden / C7 with V4bus Processors FSB800 6.4GB/Sec DDR400/333 3.2GB/Sec 2.1GB/S North Bridge 2.6GB/Sec DDR VGA Port CN700 Slot VLINK 533MB/Sec 2 x SATA 150MB/S 60MB/S 6 x USB2.0 IDE CF 100MB/S South Bridge (Secondary) (Primary) AC＇ 97 VT8237R+ INTERFACE LPC IrD Super IO PCI BUS 133MB/Sec LAN1 LAN2 LAN3 Mini PCI Keyboard Parallel COM1 COM2 RTL8139+ RTL8139+ RTL8139+ PCI Slot Mouse Port 1 x 2-pin header for reset Power Consumption: 1 x 2-pin header for ATX power switch CPU : On Board VIA Eden (Source #2) 800MHz +12 V +5 V 3-pin JST for the optional Power ( 5Vsb, PS_ON, GND ) Input Memory : 1 x DDR 256MB Full-Loading Mode 0.70 A 3.19 A Storage Light-Loading Mode 0.74 A 2.90 A SATA: 2 ports, support RAID 0,1 NOTE: IDE: 1 x 44-pin IDE connector, support Ultra ATA 33/66/100 1. Full Loading: Utilize CPU 100% with Burn-in test running 1 x internal CF socket 2. Light Loading: Utilize CPU loading below 5% without application running Expansion Dimensions 1 x PCI slot ( support up to 2 x PCI devices ) 5.25" form factor 203 mm (L) x 146 mm (W) (7.9" x 5.7") Watchdog Timer Watchdog Timer is programmable by software from 1 to 64 Environment Board level operating temperature: 0°C to 60°C On-board RTC Storage temperature: -20°C to 80°C On chip RTC with battery back up Relative humidity: 10% to 90% (Non-condensing) 1 x External Li-ion Battery Certifications Power Input CE approval Supports both AT and ATX Mode (Factory default setting is AT mode) FCC Class A 1 x 3-pin header for AT/ATX mode switch +3.3V is converted from +5V 1 x Power Input Connector Ordering Information 1 x Jst connector to receive the 5Vsb input from Power Source EBC 583-715 (P/N: 10E00058302X0) AT Mode: 5.25" Embedded Board with on board VIA C7-D 1.5 GHz CPU w/ VGA/ 3 x LANs/ Power Required:+5V/+12V (No Power On push Button, No Software Shutdown function and LAN1 remote wake up) USB/ SATA/ CF/ IDE/ PCI slot ATX Mode: Power Required:+5V/+12V/-12V/-5V/5Vsb Power In Support Power On push Button, Software Shutdown function and LAN1 remote wake up only, 2-Pin Header for Power On Push Button 5.25” CPU Boards We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: Jan-25-2008

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products