Manufacturers
NAMCO CONTROLS Motion Detection
Description
Namco Controls Motion Detection Systems
Part Number
Motion Detection
Price
Request Quote
Manufacturer
NAMCO CONTROLS
Lead Time
Request Quote
Category
PRODUCTS - M
Datasheet
Extracted Text
Motion Detection Systems / Motion Detection Systems consist of these motion detection modules coupled with a DC proximity sensor. Either the EE510 series or any DC ET-series sensor is compatible. EE931 sensors may also be employed for hazardous location requirements. Motion Detection Modules Speed Adjustment Range 3 to 60 Pulses 24 to 480 Pulses 384 to 7680 Pulses See Time Delay UL Per Minute Per Minute Per Minute Chart Output Model No. Model No. Model No. Model No. Listed Motion Switch Electromechanical Relay EE891-02103* EE891-12103* EE891-22103* —4 1 Set Form C 5A-115 VAC Resistive Open Collector EE891-02303* EE891-12303* EE891-22303* —4 20 ma. sink V ext. max. 40 volts Reed Relay EE891-02403* EE891-12403* EE891-22403* —4 1 NO, 1 NC, 12VA or 10 watts Underspeed Only Switch Electromechanical Relay EE891-02113 EE891-12113 EE891-22113 — 1 Set Form C 5A-115 VAC Resistive Zero Speed Switch Electromechanical Relay — — — EE891-32103 2 Form C 5A-115 VAC Resistive *UL Listed. Order numbers shown are for 120 VAC units. For intrinsically safe applications, use any EE981 sensor. Namco Controls Corporation • Mayfield Village, OH 44143 • (440) 460-1360 • Fax: (440) 460-3800 184 Special Application Solutions Specifications Dimensional Drawings Motion Detection CONTROL MODULE MOTION DETECTION SYSTEMS MOTION SWITCH ZERO SPEED 2.35" 1.57" (59.7) (40.0) Input 120VAC, 50/60Hz 120 VAC, or 230 VAC 50/60Hz Electromechanical 1 Set Form C DPDT Relay 5A Resistive 5A Resistive @ 120 VAC @ 120 VAC 3.75" Reed Relay 1 NO - 1 NC N/A (95.2) 10 W or 12 VA Transistor Vext. 40 VDC max. N/A Sinking, 10 mA Solid State Relay .050 Amps min. to 1.5 Amps max. 0.44" 240 VAC max. 0.75" 0.80" (11.0) 0.25" (19.0) (20.0) (6.35) DC Power Supply 24VDC, 50 mA max. for sinking (NPN) or sourcing (PNP) Input*** 2.62" 1.69" (43.0) (66.5) Drop-Out Time 1-10 Sec. N/A Adjustable Hysteresis 5% N/A BASE PIN SOCKET Latch Yes N/A EE012-50004 0.32" TYP. Mode of Operation Overspeed or (Order as (8.1) N/A 0.17" DIAMETER Underspeed programmed separate item) (2 HOLES) 0.33 C' BORE Trip Point Adjust Yes N/A 0.35 DEEP 1.16" (29.4) Response Time <10ms: electromechanical N/A <2ms: reed relay 2.31" **The use of an external suppressor network on relay output models (58.6) is recommended to prolong contact life. *** Early models may have 12 VDC supply. 1.69" 0.48" (43.0) (12.0) 0.87" (22.0) Time Delay Chart 2.66" (67.5) (FOR EE891-32103 ZERO SPEED UNITS ONLY) SIGNAL T T OUTPUT RELAY DROPOUT TIME "T" IS ADJUSTABLE FROM 1s to 10s FROM LAST INPUT PULSE Compatible Sensors (DC versions only) EE510 Series ET Series EE931 Series (for Hazardous Locations) Namco Controls Corporation Mayfield Village, OH 44143 (440) 460-1360 • FAX (440) 460-3800 • namcocontrols.com For technical assistance, call 1-800-NAMTECH 185 Special Application Solutions Motion Detection Systems R l /L i P k Circuit Drawings UNDERSPEED ONLY SWITCH, ELECTROMECHANICAL RELAY RELAY OUTPUT 1 FORM "C" 5 AMPS RESISTIVE @ 120V AC Model Nos. RESET EE891-02113 EE891-12113 4 9 RELAY AUTO OUTPUT EE891-22113 RESET RESET 120V AC 12 11 10 9 8 7 1 45 6 1 23 RELAY CIRCUIT 12V SIGNAL COMMON COMMON DC SENSOR ZERO SPEED SWITCH, ELECTROMECHANICAL RELAY RELAY OUTPUT: 2 FORM "C" 5 AMP RESISTIVE SOLID STATE RELAY @ 120V AC Model Nos. EE891-32103 120V AC 11 10 9 8 12 7 + Ð 45 6 1 23 COMMON 24V DC SENSOR "ON" "OFF" INTERNAL SWITCH FOR NORMALLY "ON" OR NORMALLY "OFF" RELAY OPERATION Namco Controls Corporation • Mayfield Village, OH 44143 • (440) 460-1360 • Fax: (440) 460-3800 186 Special Application Solutions Circuit Drawings Motion Detection Systems MOTION SWITCH, MOTION SWITCH, ELECTROMECHANICAL RELAY OPEN COLLECTOR Model Nos. Model Nos. EE891-02303 EE891-02103 EE891-12303 EE891-12103 EE891-22303 EE891-22103 RELAY OUTPUT 1 FORM "C" 5 AMP MAX. RESISTIVE @ 120V AC V EXT = 40V DC 20 ma MAX. RELAY OUTPUT RESET RESET 120V 120V AC AC 11 8 7 11 7 12 10 9 12 10 9 8 – INT. GRND. INT. GRND. + – + 45 6 6 1 23 1 23 45 OVER UNDER 24V SIGNAL SIGNAL RELAY OVER UNDER CIRCUIT 24V 2 DC 9 10 4 34 COMMON SPEED SPEED COMMON DC OVER UNDER AUTO SPEED SPEED RESET SENSOR 2 34 9 10 4 OVER UNDER AUTO SPEED SPEED RESET MOTION SWITCH, REED RELAY Model Nos. EE891-02403 EE891-12403 EE891-22403 RELAY OUTPUT FORM "A" FORM "B" 12 va 120V OR 10 WATT MAX., 500 ma MAX., 120V MAX RESET 120V AC OVER 11 7 12 10 9 8 + – 45 6 1 23 UNDER 24V SIGNAL DC 10 4 34 9 4 OVER UNDER AUTO SPEED SPEED RESET NOTE: Early models may have 12VDC supply. Namco Controls Corporation Mayfield Village, OH 44143 (440) 460-1360 • FAX (440) 460-3800 • namcocontrols.com For technical assistance, call 1-800-NAMTECH 187 Special Application Solutions
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the Motion Detection have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods