PMA/PCMA30 Primary Switcher 30 Watts Wide Input Range VDE, UL and cUL Approved for Worldwide Application Prepared for Class 1/2 CE Conformity Description TheprimaryswitchedMTMPowerModulesPMA/PCMA30havebeendesignedasauniversalcompact power supply with AC and DC wide input ranges for worldwide application and allow an efficient, cost-saving solution for different tasks where low and medium-ranged power is needed. Dimensions of the case are 90,5 x 65,5 x 33,5 mm (PMA30) and 120,0 x 65,0 x 33,0 mm (PCMA30). The power supplies are vacuum encapsulated, prepared for applications in Class 1 and/or 2 and comply to the Low Voltage Directives as well as to the up-to-date EN standards as regards CE conformity. Further features are rugged design, SMD-technology, automatic 100 % final test and 100-%-burn-in-test. MTM Power Modules are VDE, UL and cUL approved. The series PMA/PCMA30 offers 30 W constant output wattage, is short circuit protected, needs no ground load and is designed for PCB mounting (PMA) or chassis mounting (PCMA). Downloaded from Elcodis.com electronic components distributor MTM Power Messtechnik Mellenbach GmbH · Fürstenbergerstr. 143 · D-60322 Frankfurt/Main · Tel.: +49-(0)69-154260·Fax: +49-(0)69-15426 10 · www.mtm-power.com · info@mtm-power.com 30 Watt PMA/PCMA30 Technical Data Input Parameter Conditions Data U EN 60 950/UL 1950 100...240 V in AC Nominal Input Voltage 100...353 V DC U 85...264 V in AC Input Voltage Range 100...375 V (UL: 353 V ) DC DC f Input Frequency 50...400 Hz in EMI/RFI EN 55 011/B, EN 55 022/B Switching Frequency f 90 kHz typ sw Technical Data Output Conditions Parameter Data �U U =230 V U � ±1 %; U � ±3 % out Output Voltage Accuracy in AC 1 2/3 �U Ripple U = min, BW: 1 MHz �1%U LF in out �U Noise U = min, BW: 20 MHz �2%U HF in out Line Regulation U = min/max � ±0,5 % in Load Regulation I = 10...90...10 % � ±0,5 % out U =230 V in AC I Current Limiting 105...130 % I max nenn t 10...90...10 % <4 ms R Transient Response Time � T = -25...+65 °C 0,01%/K A Temperature Coefficient P over Overload Protection / Short Circuit continuous Derating single / dual / triple T >50 °C 2/3/5%/Kmax A Technical Data General Conditions Parameter Data U Isolation (prim./sec.) 3,3 kV isol p/s AC U Isolation Dual asym. + Triple-Ausgang / output 500 V isol s/s AC R >1 G� Isolation Resistance isol I U =230 V 80 µA typ leak in AC (prim./sec.) Leakage Current f=50Hz 120µAmax SELV Protection Class prepared for the use in devices with Class 2 t Hold-up Time >50 ms h T U =230 V -25...+65 °C A in AC Ambient Temperature 96 °C max Surface Temperature surface center of module Storage Temperature T -45...+85 °C S 45 K max Self-Heating at Full Load Alle Werte gemessen bei Vollast und einer Umgebungstemperatur von 25 °C (wenn nicht anders spezifiziert). All data measured at full load and ambient temperature of 25 °C (unless otherwise specified). Downloaded from Elcodis.com electronic components distributor MTM Power Messtechnik Mellenbach GmbH · Fürstenbergerstr. 143 · D-60322 Frankfurt/Main · Tel.: +49-(0)69-154260·Fax: +49-(0)69-15426 10 · www.mtm-power.com · info@mtm-power.com PMA/PCMA30 30 Watt Technical Data General Parameter Conditions Data EN 61 000-4-2, -4-3, -4-4, Immunity -4-5, -4-6, -4-11 Cooling convection Weight PMA/PCMA 340g/380 g UL94-V0 Case / Potting Material PCMA 2,5 mm² max Diameter of Flying Leads Power Supply Class nach / acc. to CSA Level 3 Output Configurations Type Type Outputs PCB Mounting Chassis Mounting U1 U2 U3 Efficiency Ground Load at V A V A V A U1 (A) % DC DC DC PMA30 S3,3 PCMA30 S3,3 3,3 6,0 0 �62 PMA30 S05 PCMA30 S05 5 6,0 0 �70 PMA30 S12 PCMA30 S12 12 2,5 0 �75 PMA30 S15 PCMA30 S15 15 2,0 0 �75 PMA30 S24 PCMA30 S24 24 1,3 0 �77 PMA30 S48 PCMA30 S48 48 0,6 0 �77 PMA30 D12 PCMA30 D12 12 1,2 -12 1,2 0 �68 PMA30 D15 PCMA30 D15 15 1,0 -15 1,0 0 �68 PMA30 D512 PCMA30 D512 5 3,0 12 1,2 �68 0,3 PMA30 D515 PCMA30 D515 5 3,0 15 1,0 0,3 �68 PMA30 D524 PCMA30 D524 5 3,0 24 0,6 0,3 �68 PMA30 T512 PCMA30 T512 5 3,0 -12 0,6 12 0,6 0,3 �78 PMA30 T515 PCMA30 T515 5 3,0 -15 0,5 15 0,5 0,3 �78 All data measured at full load and ambient temperature of 25 °C (unless otherwise specified). Downloaded from Elcodis.com electronic components distributor MTM Power Messtechnik Mellenbach GmbH · Fürstenbergerstr. 143 · D-60322 Frankfurt/Main · Tel.: +49-(0)69-154260·Fax: +49-(0)69-15426 10 · www.mtm-power.com · info@mtm-power.com PMA/PCMA30 30 Watt Dimensions PMA PCMA Ansicht von unten Seitenansicht Side View Bottom View Ansicht von oben Top View Seitenansicht Side View Alle Abmessungen in mm / All Dimensions in mm Alle Abmessungen in mm / All Dimensions in mm Änderungen vorbehalten / All Data Subject to Change Änderungen vorbehalten / All Data Subject to Change Pinning PMA30 1 2 3 4 5 6 7 PCMA30 1 2 3 4 5 6 7 Single GND +U IN IN Single GND +U IN IN 1 1 m. Sense Sense GND Sense +U IN IN m. Sense Sense Sense GND +U IN IN 1 1 GND +U +U GND 1 1 Dual sym -U GND +U IN IN Dual sym -U GND +U IN IN 2 1 2 1 Dual asym GND U +U GND U +U IN IN Dual asym GND U +U GND U +U IN IN 1 1 3 3 1 1 3 3 Triple -U GND U GND U +U +U IN IN Triple -U GND U GND U +U +U IN IN 2 1 2/3 1 3 2 1 2/3 1 3 Possible Modifications Standards Output Voltages EN 60 950 / VDE 0805 (SELV) Sense Line (Single Modules) EN 55 011 / B, EN 55 022 / B, Gruppe 1 Current Sharing EN 61 000-4-2 (ESD) Isolation up to 4kV AC EN 61 000-4-3 (HF-Felder / HF Fields) Leakage Current <80 µA EN 61 000-4-4 (Burst) Heat Sinks EN 61 000-4-5 (Surge) DIN-Rail Mounting Clips EN 61 000-4-6 (HF-Einkopplung/HF-Fields, conducted disturbances: 10 V) EN 61 000-4-11 (Netzeinbrüche/Line Shutdown) UL 1950 CAN/CSA 22.2 950, 3. Edition CE-konform / CE Conformity Application Hint According to EN 60 950 (VDE 0805) a line fuse max. 2,0 AT should be placed in the AC line to fully interrupt AC power in case of fault. The PMA modules should be screwed on the PCB with 2 lens screws (3,5x8). Max. depth: �7,5 mm! Recommended screw: Lens screw KT-S 3,5x8, cross-recessed (Part No. 2791137). Downloaded from Elcodis.com electronic components distributor © MTM Power, S&W, 12.11.02