Datasheet MVME2300 Series VME Processor Modules High-performance expansion VME board with the ability to customize applications The MVME2300 series of VME boards provides the performance of Motorola’s PowerPlus Architecture, and the ability to fully customize your application with two PCI mezzanine cards (PMCs). Utilizing Motorola’s MPC60x class 32-bit microprocessors, the peripheral component interconnect (PCI) bus for the on-board peripherals, processor-memory bus to PCI bus bridge, and a VME interface, the MVME2300 processor modules pack optimum levels of flexibility and performance into a single VME slot. Flash 1MB MPC60x Class Two PLCCs Processor (socketed) RAM Memory 128MB 16 ECC SDRAM PCI Chipset Controller 4MB Flash Raven PowerPC Architecture Bus Falcon x 2 — A32/D64 PMC P2 I/O PMC P2 I/O PCI Expansion 64 64 PCI Local Bus — A32/D64 64 64 ■MPC60x class 32-bit microprocessors Ethernet PCI to VME DEC 21140■L1 cache–16KB/16KB MPC603 or 32KB/32KB PCI to ISA PMC PMC Bridge Bridge Slot 1 Slot 2 Tundra Universe MPC604 Winbond 10/100BaseTX ■128MB of on-board ECC DRAM FP I/O ISA Bus — A16/D8 PMC FP I/O PMC FP I/O■Up to 1MB socketed Flash for on-board firmware or user-specified requirements NVRAM Async P1 P2 RTC Serial ■4MB on-board Flash memory for user-specified MK48T59 PC16550 VME64 Extension Connectors requirements EIA232 ■On-board debug monitor with self-test diagnostics FP I/O ■Two 32/64-bit PMC expansion slots with front-panel and P2 I/O ■64-bit PCI expansion mezzanine connector ■8K x 8 NVRAM and time-of-day clock with replaceable battery-backup ■One asynchronous serial debug port ■Four 32-bit timers, one 16-bit timer, one watchdog timer ■10/100Mb/s Ethernet transceiver interface ■4-level requester, 7-level interrupter, and 7-level interrupt handler for VMEbus SNAPHAT Battery M VM E23 00 De ta ils MVME2300 DETAILS IEEE P1386.1 Compliant PMC Slots P2/J2 connectors providing a user with additional I/O. The MVME2300 features dual PMC ports with support The VME64 extension connector is 100 percent for both front-panel and P2 I/O. P2 I/O-based PMCs that backward compatible with existing VME card systems. follow the PMC committee recommendation for PCI I/O PowerPlus Architecture when using the VME64 extension connector are pin-out The PowerPlus Architecture is a processor and bus compatible with the MVME2300. architecture fully optimized to get the maximum In addition to providing high-performance expansion I/O, performance from the PowerPC architecture the IEEE P1386.1 compliant PMC ports form a common microprocessor family, the PCI bus, and the VMEbus. The architecture for future generations of products. outstanding performance of VME processor boards Changing I/O requirements can be satisfied by simply based on the PowerPlus Architecture is not due to a replacing PMCs while reusing the same base platform, single factor. A number of elements in the design reducing the long-term cost of ownership. contribute to its outstanding performance including the processor-memory subsystem, high-speed local bus, VME64 Extension Connectors optimally decoupled architecture, decoupling the To maximize the capabilities of the MVME2300, 5-row processor from PCI, and the advanced VME interface 160-pin DIN connectors replace the 3-row, 96-pin that reduces PCI delays. Contact your sales connectors historically used on VME for P1 and P2. Two representative for details. rows, Z and D, have been added to the VME P1/J1 and Sp ec ific atio ns SPECIFICATIONS Processor VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014) Microprocessor: MPC603 MPC604 DTB Master: A16–A32; D08–D64, BLT Clock Frequency: 200 MHz 333 MHz DTB Slave: A24–A32; D08–D64, BLT, UAT On-chip Cache (I/D): 16KB/16KB 32KB/32KB Arbiter: RR/PRI Interrupt IRQ 1–7/Any one of seven IRQs Memory Handler/Generator: System Controller: Yes, jumperable or auto detect ECC Protected Main Dynamic RAM with 66 MHz bus Location Monitor: Two, LMA32 Memory: Capacity (50ns EDO): 128MB Ethernet Interface Single Cycle 9 read/4 write Accesses: Controller: DEC 21140 Read Burst Mode 9-1-2-1 idle; 3-1-2-1 aligned page hit PCI Local bus DMA: Yes (60ns): Connector: Routed to front panel via an RJ-45 Read Burst Mode 8-1-1-1 idle; 2-1-1-1 aligned page hit (50ns): Write Burst Mode: Asynchronous Serial Port 4-1-1-1 idle; 3-1-1-1 aligned page hit Architecture: 128-bit, 2-way interleaved Controller: PC16550 EEPROM/Flash: On-board programmable Connector: Routed to the front panel via an RJ-45 Capacity: 1MB via two 32-pin PLCC/CLCC sockets; 4MB surface mount Counters/Timers Read Access (4MB 68 clocks (32-byte burst) port): TOD Clock Device: MK48T59; 8KB NVRAM Read Access (1MB 260 clocks (32-byte burst) port): Real-Time Four, 16-bit programmable Timers/Counters: NVRAM: 8KB; 4KB available for users Watchdog Timer: Time-out generates reset Cell Storage Life: 50 years at 55° C Cell Capacity Life: 10 years at 100% duty cycle Miscellaneous Removable Battery: Yes Reset and Abort switches and four LEDs for Fail, CPU, PMC1, PMC2 on front panel 2 MVME2300 Series IEEE P1386.1 PCI Mezzanine Card Slot Demonstrated MTBF (based on a sample of eight boards in accelerated stress environment) Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, PN4 Mean: 190,509 hours connectors 95% Confidence: 107,681 hours PCI Bus Clock: 33 MHz Signaling: 5 V Environmental Power: +3.3 V, +5 V, ±12 V, 7.5 watts maximum per PMC slot Operating Nonoperating Module Types: One double-wide or two single-wide Temperature: 0° C to +55° C –40° C to +70° C front-panel I/O or P2 I/O Note: P2 I/O from PMC slot 2 is only accessible to systems equipped Humidity (NC): 5% to 85% 5% to 95% for VME64 extension connectors. Vibration: 1 G Sine Sweep .5 G Sine Sweep 5–100 Hz 5–100 Hz; PCI Expansion Connector 3 G Sine Sweep 50–500 Hz Address/Data: A32/D32/D64 PCI Bus Clock: Electromagnetic Compatibility (EMC) 33 MHz Signaling: 5V Intended for use in systems meeting the following regulations: Connector: 114-pin connector located on the planar of U.S.: FCC Part 15, Subpart B, Class A (non-residential) the MVME2300 Canada: ICES-003, Class A (non-residential) This product was tested in a representative system to the following Power Requirements standards: CE Mark per European EMC Directive 89/336/EEC with + 5 V ± 5% Amendments; Emissions: EN55022 Class B; Immunity: EN55024 MVME2300 w/ MPC603 4.0 A typical, 4.75 A max. @ 200 MHz: Safety MVME2300 w/ MPC604 5.0 A typical, 5.5 A max. @ 333 MHz: All printed wiring boards (PWBs) are manufactured with a flammability Note: Power requirements are PMC dependent at +12 and –12 volts. rating of 94V-0 by UL recognized manufacturers. Board Size Software Support Height: 233.4 mm (9.2 in.) The MVME2300 is supported by a complete range of real-time Depth: 160.0 mm (6.3 in.) operating systems and kernels. Front Panel Height: 261.8 mm (10.3 in.) Width: 19.8 mm (0.8 in.) Max. Component 14.8 mm (0.58 in.) Height: MVME2300 Series 3 O rdering In formati on ORDERING INFORMATION Part Number Description All models contain 5MB Flash. MVME2304 200 MHz MPC603, 128MB ECC DRAM, IEEE handle MVME2304-900 200 MHz MPC603, 128MB ECC DRAM, Scanbe handle MVME2304-0141 333 MHz MPC604, 128MB ECC DRAM, original VME Scanbe front panel and handles MVME2304-0141SC 333 MHz MPC604, 128MB ECC DRAM, original VME Scanbe front panel and handles w/ serial I/O pin-out MVME2304-0143 333 MHz MPC604, 128MB ECC DRAM, IEEE 1101 compatible front panel with injector/ejector handles Related Products PMCSPAN-002 Primary PCI expansion, mates directly to the MVME2300 providing slots for either two single-wide or one double-wide IEEE P1386.1 compliant PMC cards; optional PMCSPAN-010 PMCSPAN1-002 PMCSPAN-002 with original VME Scanbe ejector handles PMCSPAN-010 Secondary PCI expansion, plugs directly into PMCSPAN-002 providing two additional PMC slots PMCSPAN1-010 PMCSAN-010 with original VME Scanbe ejector handles Documentation V2300A/IH MVME2300 Installation and Use Manual V2300A/PG MVME2300 Programmer’s Reference Guide PMCSPANA/IH PMCspan Installation Guide PPCBUGA1/UM PPC1Bug User’s Manual, Part 1 of 2 PPCBUGA2/UM PPC1Bug User’s Manual, Part 2 of 2 PPCDIAA/UM Firmware Diagnostics Manual Documentation is available for online viewing and ordering at http://www.motorola.com/computer/literature Motorola Computer Group NORTH AMERICA: Tempe, AZ 800-759-1107 or 602-438-5720 ASIA: Shanghai, China +86 21 5292 5693 Regional Offices EUROPE: Loughborough, UK +44 1509 634300 PACIFIC RIM: Tokyo, Japan +81 3 5424 3101 EAST MEDITERRANEAN: Tel Aviv, Israel +972 3 568 4388 ASIA/PACIFIC: Hong Kong +852 2966 3210 www.motorola.com/computer MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners. © 1997, 2001, 2002 Motorola, Inc. All rights reserved. This datasheet identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgement to confirm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. M2300-D7 12/02