MVME2300 TM VME Processor Modules ™ ™ � PowerPC 603 or PowerPC 604 32-bit microprocessor � L1 cache–16KB/16KB PowerPC 603 or 32KB/32KB PowerPC 604 � 16MB to 128MB of on-board ECC DRAM � Up to 1MB socketed Flash for on-board firmware or user-specified requirements � 4MB on-board Flash memory for user- specified requirements � On-board debug monitor with self-test diagnostics � Two 32/64-bit PMC expansion slots with front-panel and P2 I/O � 64-bit PCI expansion mezzanine connector � 8K x 8 NVRAM and time-of-day clock with replaceable battery-backup � One asynchronous serial debug port � Four 32-bit timers, one 16-bit timer, one watchdog timer � 10/100Mb/s Ethernet transceiver interface � 4-level requester, 7-level interrupter, and 7-level interrupt handler for VMEbus High-performance expansion VME board with the ability to customize applications The MVME2300 series of VME boards provides the performance of Motor- ola’s PowerPlus Architecture, and the ability to fully customize your applica- tion with two PCI Mezzanine Cards (PMCs). Utilizing Motorola’s PowerPC 603 or PowerPC 604 32-bit microprocessors, the Peripheral Component Interconnect (PCI) bus for the on-board peripher- als, processor-memory bus to PCI bus bridge, and a VME interface, the MVME2300 processor modules pack optimum levels of flexibility and perfor- mance into a single VME slot. FLASH 1 MB RAM Two PLCCs - 16MB to 128MB 603 or 604 (Socketed) ECC DRAM - 4MB FLASH Memory 16 PCI Chipset Controller PMC P2 I/O PMC P2 I/O Raven Falcon x 2 PowerPC Bus — A32/D64 PCI Expansion 64 64 PCI Local Bus — A32/D64 64 64 PMC PMC Ethernet PCI to VME PCI to ISA Slot 2 Slot 1 DEC 21140 Bridge Bridge Tundra Universe Winbond 10BaseT/100BaseTX FP I/O PMC FP I/O PMC FP I/O ISA Bus — A16/D8 P1 P2 Async Serial VME64 Extension Connectors NVRAM PC16550 RTC MK48T59 EIA232 FP I/O MVME2300 Details PowerPlus Architecture The PowerPlus Architecture is a processor and bus architec- MVME2300 Details ture fully optimized to get the maximum performance from the IEEE P1386.1 Compliant PMC Slots PowerPC microprocessor family, the PCI bus, and the VME- The MVME2300 features dual PMC ports with support for bus. The outstanding performance of VME processor boards both front-panel and P2 I/O. P2 I/O-based PMCs which follow based on the PowerPlus Architecture is not due to a single the PMC committee recommendation for PCI I/O when using factor. A number of elements in the design of the PowerPlus the VME64 extension connector will be pin-out compatible Architecture contribute to its outstanding performance includ- with the MVME2300. ing the processor-memory subsystem, high-speed local bus, In addition to providing high-performance expansion I/O, the optimally decoupled architecture, decoupling the processor IEEE P1386.1 compliant PMC ports form a common architec- from PCI, and the advanced VME interface which reduces ture for future generations of products. Changing I/O require- PCI delays. Contact your sales representative for details. ments can be satisfied by simply replacing PMCs while reusing the same base platform, reducing the long-term cost of ownership. VME64 Extension Connector To maximize the capabilities of the MVME2300, 5-row 160- pin DIN connectors replace the 3-row, 96-pin connectors his- torically used on VME for P1 and P2. Two rows, Z and D, have been added to the VME P1/J1 and P2/J2 connectors providing a user with additional I/O. The VME64 extension connector is 100% backward compatible with existing VME card systems. SNAPHAT Battery Specifications IEEE P1386.1 PCI Mezzanine Card Slot Address/Data: A32/D32/D64, PMC PN1, PN2, PN3, Specifications PN4 connectors Processor PCI Bus Clock: 33 MHz Microprocessor: MPC603 MPC604 Signaling: 5V Clock Frequency: 200 MHz 333 MHz Power: +3.3V, +5V, ±12V, 7.5 watts maximum On-chip Cache (I/D): per PMC slot 16KB/16KB 32KB/32KB Module Types: One double-wide or two single-wide front Memory panel I/O or P2 I/O ECC Protected Main Dynamic RAM with 66 MHz bus Note: P2 I/O from PMC slot 2 is only accessible to systems Memory: equipped for VME64 extension connectors Capacity (60ns EDO): 16 or 32MB Capacity (50ns EDO): 64 or 128MB PCI Expansion Connector Address/Data: A32/D32/D64 Single Cycle Accesses: 9 read/4 write PCI Bus Clock: 33 MHz Read Burst Mode 9-1-2-1 idle; 3-1-2-1 aligned page hit (60ns): Signaling: 5V Read Burst Mode 8-1-1-1 idle; 2-1-1-1 aligned page hit Connector: 114-pin connector located on the planar (50ns): of the MVME2300 Write Burst Mode: 4-1-1-1 idle; 3-1-1-1 aligned page hit Power Requirements Architecture: 128-bit, 2-way interleaved + 5V ± 5% EEPROM/Flash: On-board programmable MVME2300 w/ MPC603 4.0 A typical, 4.75 A max. Capacity: 1MB via two 32-pin PLCC/CLCC sockets; @ 200 MHz: 4MB surface mount MVME2300 w/ MPC604 5.0 A typical, 5.5 A max. Read Access (4MB 68 clocks (32-byte burst) @ 333 MHz: port): Note: Power requirements are PMC dependent at +12 and –12 Read Access (1MB 260 clocks (32-byte burst) volts. port): NVRAM: Board Size 8KB; 4KB available for users Height: 233.4 mm (9.2 in.) Cell Storage Life: 50 years at 55° C Depth: 160.0 mm (6.3 in.) Cell Capacity Life: 10 years at 100% duty cycle Front Panel Height: 261.8 mm (10.3 in.) Removable Battery: Yes Width: 19.8 mm (0.8 in.) VMEbus ANSI/VITA 1-1994 VME64 (IEEE STD 1014) Max. Component 14.8 mm (0.58 in.) DTB Master: A16–A32; D08–D64, BLT Height: DTB Slave: A24–A32; D08–D64, BLT, UAT Demonstrated MTBF Arbiter: RR/PRI (based on a sample of eight boards in accelerated stress environ- Interrupt Handler/ IRQ 1–7/Any one of seven IRQs ment) Generator: Mean: 190,509 hours System Controller: Yes, jumperable or auto detect 95% Confidence: 107,681 hours Location Monitor: Two, LMA32 Environmental Ethernet Interface Operating Nonoperating Controller: DEC 21140 Temperature: 0° C to +55° C –40° C to +70° C PCI Local bus DMA: Yes Humidity (NC): 5% to 85% 5% to 95% Connector: Routed to front panel via an RJ-45 Vibration: 1 G Sine Sweep .5 G Sine Sweep 5–100 Hz 5–50 Hz; Asynchronous Serial Port 3 G Sine Sweep Controller: PC16550 50–500 Hz; Connector: Routed to the front panel via an RJ-45 Electromagnetic Compatibility (EMC) Counters/Timers Intended for use in systems meeting the following regulations: TOD Clock Device: MK48T59; 8KB NVRAM U.S.: FCC Part 15, Subpart B, Class A (non-residential) Real-Time Timers/ Four, 16-bit programmable Canada: ICES-003, Class A (non-residential) Counters: This product was tested in a representative system to the following Watchdog Timer: Time-out generates reset standards: Miscellaneous CE Mark per European EMC Directive 89/336/EEC with Amend- ments; Emissions: EN55022 Class B; Immunity: EN50082-1 Reset and Abort switches and four LEDs for Fail, CPU, PMC1, PMC2 on front panel Safety MVME2304-0133 333 MHz MPC604, 64MB ECC DRAM, IEEE All printed wiring boards (PWBs) are manufactured with a flammabil- 1101 compatible front panel with injector/ejec- ity rating of 94V-0 by UL recognized manufacturers. tor handles MVME2304-0141 333 MHz MPC604, 128MB ECC DRAM, origi- Software Support nal VME Scanbe front panel and handles The MVME2300 is supported by a complete range of real-time oper- ating systems and kernels. MVME2304-0141SC 333 MHz MPC604, 128MB ECC DRAM, origi- nal VME Scanbe front panel and handles w/ Ordering Information serial I/O pin-out Ordering Information MVME2304-0143 333 MHz MPC604, 128MB ECC DRAM, IEEE 1101 compatible front panel with injector/ejec- tor handles Part Number Description Related Products All models contain 5MB Flash. Part Number Description MVME2301 200 MHz MPC603, 16MB ECC DRAM, IEEE PMCSPAN-002 Primary PCI expansion, mates directly to the handle MVME2300 providing slots for either two sin- MVME2301-900 gle-wide or one double-wide IEEE P1386.1 200 MHz MPC603, 16MB ECC DRAM, compliant PMC cards; optional PMCSPAN-010 Scanbe handle PMCSPAN(1)-002 MVME2302 PMCSPAN-002 with original VME Scanbe 200 MHz MPC603, 32MB ECC DRAM, IEEE ejector handles handle PMCSPAN-010 MVME2302-900 Secondary PCI expansion, plugs directly into 200 MHz MPC603, 32MB ECC DRAM, PMCSPAN-002 providing two additional PMC Scanbe handle slots MVME2303 200 MHz MPC603, 64MB ECC DRAM (not PMCSPAN(1)-010 PMCSAN-010 with original VME Scanbe ejec- available with connector for PCI expansion), tor handles IEEE handle MPMCxxx MVME2303-900 Motorola’s family of PMC modules; ask your 200 MHz MPC603, 64MB ECC DRAM, sales representative for details Scanbe handle MVME2304 200 MHz MPC603, 128MB ECC DRAM, IEEE Documentation handle Part Number Description MVME2304-900 200 MHz MPC603, 128MB ECC DRAM, V2300A/IH MVME2300 Installation and Use Manual Scanbe handle V2300A/PG MVME2300 Programmer’s Reference Guide MVME2304-0111 333 MHz MPC604, 16MB ECC DRAM, original VME Scanbe front panel and handles PMCSPANA/IH PMCspan Installation Guide MVME2304-0113 333 MHz MPC604, 16MB ECC DRAM, IEEE PPCBUGA1/UM PPC1Bug User’s Manual, Part 1 of 2 1101 compatible front panel with injector/ejec- PPCBUGA2/UM PPC1Bug User’s Manual, Part 2 of 2 tor handles PPCDIAA/UM Firmware Diagnostics Manual MVME2304-0121 333 MHz MPC604, 32MB ECC DRAM, original Documentation is available for on-line viewing and ordering at http:// VME Scanbe front panel and handles www.motorola.com/computer/literature. MVME2304-0121SC 333 MHz MPC604, 32MB ECC DRAM, original VME Scanbe front panel and handles w/ serial I/O pin-out MVME2304-0123 333 MHz MPC604, 32MB ECC DRAM, IEEE 1101 compatible front panel with injector/ejec- tor handles MVME2304-0131 333 MHz MPC604, 64MB ECC DRAM, original VME Scanbe front panel and handles MVME2304-0131SC 333 MHz MPC604, 64MB ECC DRAM, original VME Scanbe front panel and handles w/ serial I/O pin-out www.motorola.com/computer 1-800-759-1107 Motorola Computer Group Worldwide Headquarters: 2900 S. Diablo Way, Tempe, AZ 85282 Sales Offices: United Kingdom: +44 (0) 1256 790555 • Asia Pacific and Japan: 852-2966-3209 • France: +33 (0) 1 64 86 64 00 • Germany: +49 (0) 611-3611 604 • East Mediterranean: 972-3-568-4388 • Canada & Central Pan America: 888-366-3624 • Eastern Pan America: 508-357-8260 • Western Pan America: 408-991-8634 Motorola and the stylized M logo are registered trademarks and the Intelligence Everywhere logo, Digital DNA and the Digital DNA logo are trademarks of Motorola, Inc. PowerPC and the PowerPC logo are registered trademarks; and PowerPC 603 and PowerPC 604 are trademarks of International Business Machines Corporation and are used by Motorola, Inc. under license from International Business Machines Corporation. All other product or service names are the property of their respective owners. This data sheet identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may sell products. A prospective buyer should exercise its own independent judgement to confirm the suitability of the products for particular applications. Motorola reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Motorola’s licensee, licensee’s transferees, and licensee’s customers and users. Availability of some of the products and services described herein may be restricted in some locations. ® Reg. U.S. Pat. & Tm. Off. Copyright 1997, 2001 Motorola, Inc. M2300-D6 04/01