Elite.Parts

Description

Mosier Norgren 11-018-110 - Precision Air Pressure Regulator 1/4" Port Size

Part Number

11-018-110

Price

Request Quote

Manufacturer

MOSIER NORGREN

Lead Time

Request Quote

Category

PRODUCTS - 1

Specifications

Pressure Range

3 - 150 PSIG

Features

Constant bleed feature provides maximum sensitivity to system changes
Fast response
Minimum overshoot during flow changes
Precision regulation obtained by pilot valve design - small change in the pilot valve position results in a large change in the main valve position
Relieving feature allows reduction of downstream pressure when the system is dead-ended

Datasheet

11-018-110-d-1553388747s.pdf

32 KiB

Download

Extracted Text

11-018 Precision Air Pressure Regulator 1/4" Port Size Fast response Minimum overshoot during flow changes Precision regulation obtained by pilot valve design - small change in the pilot valve position results in a large change in the main valve position Constant bleed feature provides maximum sensitivity to system changes Relieving feature allows reduction of downstream pressure when the system is dead-ended Ordering Information. Models listed have PTF threads, hand wheel adjustment, and relieving diaphragm. A gauge is not included. 3 Port Size Outlet Pressure Adjustment Range* Model Number Flow scfm (dm /s) Weight lbs (kg) 1/4" 0.4 to 10 psig (0.03 to 0.69 bar) 11-018-146 12 (5.66)† 1.4 (0.64) 1/4" 1.0 to 60 psig (0.1 to 4.1 bar) 11-018-100 12 (5.66)† 1.4 (0.64) 1/4" 3 to 150 psig (0.2 to 10.3 bar) 11-018-110 12 (5.66)†† 1.4 (0.64) * Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. † Typical flow with 100 psig (7 bar) inlet pressure, 60 psig (4.1 bar) set pressure and 0.125 psig (0.009 bar) droop from set. †† Typical flow with 200 psig (14 bar) inlet pressure, 60 psig (4.1 bar) set pressure and 0.250 psig (0.017 bar) droop from set. Note: 5 micron prefiltration required. Alternative Models 1 1 -1 8 - Threads Substitute Screw Adjustment Substitute PTF 0 -100 with slotted screw adjustment 101 ISO G parallel 8 -110 with slotted screw adjustment 112 ISO G Rc 9 Service Kits ISO Symbols Type Part number Low Pressure Models 2787-01 High Pressure Models 2787-02 Special tool to install main valve seat 681-01 Service kit includes o-rings, seals, pilot diaphragm, pilot spring, main diaphragm, main valve, main valve seat, diffuser screen, constant bleed orifice and orifice filter Relieving See Section ALE-24 for Accessories Littleton, CO USA Phone 303-794-2611 www.norgren.com ALE-7-2 11-018 Precision Air Pressure Regulator Typical Performance Characteristics Technical Data LOW PRESSURE MODELS - FLOW CHARACTERISTICS INLET PRESSURE: 100 psig (7 bar) Fluid: Compressed air RANGE: 1 to 60 psig (0.1 to 4.1 bar) 4.15 Low Pressure Models: 60 11-018-100 and 11-018-146 4.10 59 High Pressure Models: 2.10 11-018-110 30 2.05 Inlet pressure range* 2.00 Low Pressure Models: 8 to 150 psig (0.55 to 10.3 bar) 29 High Pressure Models: 10 to 200 psig (0.7 to 13.8 bar) 0.70 10 * Inlet pressure must be at least 7 psig (0.5 bar) greater than the adjusted outlet pressure for 0.65 proper operation. 9 Operating temperature*: 32° to 160°F (0° to 70°C) 0.60 ** Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C). 0.35 5 Flow capacity with 100 psig (6.9 bar) inlet pressure 3 0.30 11-018-146: 12 scfm (5.7 dm /s) with set pressure of 10 psig (0.7 bar) 4 3 0 2 4 6 8 10 scfm 11-018-100 and 11-018-110: 20 scfm (9.4 dm /s) with set pressure of 20 psig 3 3 0 1.0 2.0 3.0 4.0 5.0 dm /s (1.4 bar). A small pressure droop occurs at flows above 12 scfm (5.7 dm /s). AIR FLOW Repeatability Low Pressure Models: 0.02 psig (0.001 bar) for flow change; 0.05 psig LOW PRESSURE MODELS - REGULATION CHARACTERISTICS INLET PRESSURE: 150 psig (10.3 bar) (0.004 bar) when turning supply off and on RANGE: 1 to 60 psig (0.1 to 4.1 bar) 4.15 60 High Pressure Models: 0.08 psig (0.006 bar) for flow change; 0.16 psig 4.10 (0.011 bar) when turning supply off and on 59 Constant bleed feature: Under dead-end conditions, a small, constant bleed of pilot 2.10 air will escape thru the relief passage in the bottom plug. This will be accompanied 30 2.05 by a slight residual outlet pressure of 1 to 4 inches H O (2.5 to 10 millibar). 2 2.00 29 Gauge ports: 1/4" PTF with PTF main ports 0.70 10 Rc1/4 with ISO G and ISO Rc main ports 0.65 Materials 9 0.60 Body: Zinc 0.35 Bonnet: Zinc 5 Main valve: Polycarbonate 0.30 4 Main valve seat: Teflon 0 20 40 60 80 100 120 140 160 psig Pilot valve: Stainless steel 0 2 4 6 8 10 bar INLET PRESSURE Pilot valve seat: Aluminum Main diaphragm: Nitrile HIGH PRESSURE MODELS - FLOW CHARACTERISTICS INLET PRESSURE: 200 psig (14 bar) Pilot diaphragm RANGE: 3 to 150 psig (0.2 to 10.35 bar) 10.35 150 Low Pressure Models:302 SS 10.30 High Pressure Models: Nitrile 148 10.20 Bottom plug: Brass Elastomers: Nitrile, neoprene, polyurethane 6.2 90 6.1 88 All Dimensions in Inches (mm) 4.2 60 2.12 (54) 4.1 4.0 58 2.1 30 2.0 28 0 2 4 6 8 10 scfm 3 0 1.0 2.0 3.0 4.0 5.0 dm /s AIR FLOW HIGH PRESSURE MODELS - REGULATION CHARACTERISTICS INLET PRESSURE: 200 psig (14 bar) RANGE: 3 to 150 psig (0.2 to 10.3 bar) 10.4 150 10.3 148 90 6.2 6.1 88 4.2 60 4.1 58 4.0 2.1 30 Panel mounting hole diameter: 0.47" (12 mm) 2.0 28 Maximum panel thickness: 0.094" (2.4 mm) 0 20 40 60 80 100 120 140 160 180 psig 0 2 4 6 8 10 12 bar INLET PRESSURE Littleton, CO USA Phone 303-794-2611 www.norgren.com ALE-7-3 0.56 (14) 2.52 (64) 4.55 (116) 2.12 (54) OUTLET PRESSURE bar psig OUTLET PRESSURE OUTLET PRESSURE OUTLET PRESSURE bar bar bar psig psig psig

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products