MICROSEMI APT75GP120JDQ3
Description
Microsemi's APT75GP120JDQ3 IGBT has low conduction loss, a 50kHz-operation @ 800V
plus 20A, low gate charge, a 20kHz-operation @ 800V plus 44A, and ultra-fast tail
current shutoff capabilities.
Part Number
APT75GP120JDQ3
Price
Request Quote
Manufacturer
MICROSEMI
Lead Time
Request Quote
Category
PRODUCTS - A
Datasheet
Extracted Text
TYPICAL PERFORMANCE CURVES APT75GP120JDQ3 1200V APT75GP120JDQ3 ® ® POWER MOS 7 IGBT ® The POWER MOS 7 IGBT is a new generation of high voltage power IGBTs. Using Punch Through Technology this IGBT is ideal for many high frequency, high voltage switching applications and has been optimized for high frequency switchmode power supplies. "UL Recognized" file # E145592 ® ISOTOP • Low Conduction Loss • 50 kHz operation @ 800V, 20A • Low Gate Charge • 20 kHz operation @ 800V, 44A C • Ultrafast Tail Current shutoff • RBSOA Rated G E MAXIMUM RATINGS All Ratings: T = 25°C unless otherwise specified. C Symbol Parameter UNIT APT75GP120JDQ3 V Collector-Emitter Voltage 1200 CES Volts V Gate-Emitter Voltage ±20 GE I Continuous Collector Current @ T = 25°C 128 C1 C I Continuous Collector Current @ T = 110°C 57 Amps C2 C 1 I Pulsed Collector Current @ T = 150°C 300 CM C Reverse Bias Safe Operating Area @ T = 150°C RBSOA 300A @ 960V J P Total Power Dissipation Watts 543 D T ,T Operating and Storage Junction Temperature Range -55 to 150 J STG °C T Max. Lead Temp. for Soldering: 0.063" from Case for 10 Sec. L 300 STATIC ELECTRICAL CHARACTERISTICS Symbol Characteristic / Test Conditions MIN TYP MAX Units V Collector-Emitter Breakdown Voltage (V = 0V, I = 1250µA) 1200 (BR)CES GE C V Gate Threshold Voltage (V = V , I = 2.5mA, T = 25°C) GE(TH) 3 4.5 6 CE GE C j Volts Collector-Emitter On Voltage (V = 15V, I = 75A, T = 25°C) 3.3 3.9 GE C j V CE(ON) Collector-Emitter On Voltage (V = 15V, I = 75A, T = 125°C) 3.0 GE C j 2 Collector Cut-off Current (V = 1200V, V = 0V, T = 25°C) 1250 CE GE j I µA CES 2 Collector Cut-off Current (V = 1200V, V = 0V, T = 125°C) 5500 CE GE j I Gate-Emitter Leakage Current (V = ±20V) nA GES ±100 GE CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com G E E C SOT-227 050-7458 Rev A 10-2005 DYNAMIC CHARACTERISTICS APT75GP120JDQ3 Symbol Characteristic Test Conditions MIN TYP MAX UNIT C 7035 Input Capacitance Capacitance ies C pF 460 Output Capacitance V = 0V, V = 25V oes GE CE C f = 1 MHz 80 Reverse Transfer Capacitance res V V Gate-to-Emitter Plateau Voltage Gate Charge 7.5 GEP 3 Q V = 15V Total Gate Charge 320 g GE V = 600V Q nC Gate-Emitter Charge 50 CE ge I = 75A Q C 140 Gate-Collector ("Miller") Charge gc T = 150°C, R = 5Ω, V = J G GE Reverse Bias Safe Operating Area RBSOA A 300 15V, L = 100µH,V = 960V CE t Inductive Switching (25°C) Turn-on Delay Time d(on) 20 V = 600V t Current Rise Time 40 CC r ns t V = 15V Turn-off Delay Time d(off) GE 165 I = 75A t C Current Fall Time 55 f R = 5Ω 4 G E Turn-on Switching Energy 1620 on1 T = +25°C 5 J E µJ Turn-on Switching Energy (Diode) 4100 on2 6 E Turn-off Switching Energy 2500 off t Inductive Switching (125°C) Turn-on Delay Time d(on) 20 t V = 600V Current Rise Time 40 r CC ns V = 15V t Turn-off Delay Time GE d(off) 245 I = 75A t C Current Fall Time f 115 R = 5Ω 4 4 G E Turn-on Switching Energy 1620 on1 T = +125°C 55 J E µJ Turn-on Switching Energy (Diode) 5850 on2 6 E Turn-off Switching Energy 4820 off THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic UNIT MIN TYP MAX R Junction to Case (IGBT) .23 θJC °C/W R Junction to Case (DIODE) .56 θJC W gm Package Weight 29.2 T V RMS Voltage (50-60hHz Sinusoidal Wavefomr Ffrom Terminals to Mounting Base for 1 Min.) Volts 2500 Isolation 1 Repetitive Rating: Pulse width limited by maximum junction temperature. 2 For Combi devices, I includes both IGBT and FRED leakages ces 3 See MIL-STD-750 Method 3471. 4 E is the clam ped inductive turn-on-energy of the IGBT only, without the effect of a commutating diode reverse recovery current on1 adding to the IGBT turn-on loss. (See Figure 24.) 5 E is the clamped inductive turn-on energy that includes a commutating diode reverse recovery current in the IGBT turn-on switching on2 loss. (See Figures 21, 22.) 6 E is the clamped inductive turn-off energy measured in accordance with JEDEC standard JESD24-1. (See Figures 21, 23.) off APT Reserves the right to change, without notice, the specifications and information contained herein. 050-7458 Rev A 10-2005 TYPICAL PERFORMANCE CURVES APT75GP120JDQ3 160 160 V = 15V V = 10V GE GE 250µs PULSE TEST 250µs PULSE TEST <0.5 % DUTY CYCLE 140 140 <0.5 % DUTY CYCLE 120 120 100 100 T = 25°C J 80 80 T = 25°C T = 125°C J J 60 60 T = 125°C J 40 40 20 20 0 0 0 1 2 3 4 5 0 1 2 3 4 5 V , COLLECTER-TO-EMITTER VOLTAGE (V) V , COLLECTER-TO-EMITTER VOLTAGE (V) CE CE FIGURE 1, Output Characteristics(T = 25°C) FIGURE 2, Output Characteristics (T = 125°C) J J 250 16 250µs PULSE I = 75A C TEST<0.5 % DUTY T = 25°C J CYCLE 14 V = 240V 200 CE 12 V = 600V CE 10 150 8 T = -55°C J V = 960V 100 CE 6 T = 25°C J T = 125°C 4 J 50 2 0 0 0 1 2 3 4 5 6 7 8 9 10 0 50 100 150 200 250 300 350 V , GATE-TO-EMITTER VOLTAGE (V) GATE CHARGE (nC) GE FIGURE 3, Transfer Characteristics FIGURE 4, Gate Charge 5.0 5 T = 25°C. I = 150A J C 250µs PULSE TEST <0.5 % DUTY CYCLE I = 150A C 4 4.0 I = 75A C I = 75A C 3.0 3 I = 37.5A I = 37.5A C C 2 2.0 1 1.0 V = 15V. GE 250µs PULSE TEST <0.5 % DUTY CYCLE 0 0 6 8 10 12 14 16 0 25 50 75 100 125 V , GATE-TO-EMITTER VOLTAGE (V) T , Junction Temperature (°C) GE J FIGURE 5, On State Voltage vs Gate-to- Emitter Voltage FIGURE 6, On State Voltage vs Junction Temperature 1.10 180 160 140 1.05 120 100 1.00 80 60 0.95 40 20 0.90 0 -50 -25 0 25 50 75 100 125 -50 -25 0 25 50 75 100 125 150 T , JUNCTION TEMPERATURE (°C) T , CASE TEMPERATURE (°C) J C FIGURE 7, Breakdown Voltage vs. Junction Temperature FIGURE 8, DC Collector Current vs Case Temperature BV , COLLECTOR-TO-EMITTER BREAKDOWN V , COLLECTOR-TO-EMITTER VOLTAGE (V) I , COLLECTOR CURRENT (A) I , COLLECTOR CURRENT (A) CES CE C C VOLTAGE (NORMALIZED) I DC COLLECTOR CURRENT(A) V , COLLECTOR-TO-EMITTER VOLTAGE (V) V , GATE-TO-EMITTER VOLTAGE (V) I , COLLECTOR CURRENT (A) C, CE GE C 050-7458 Rev A 10-2005 APT75GP120JDQ3 30 350 300 V = 15V GE 250 20 V =15V,T =125°C GE J 200 150 V =15V,T =25°C 10 GE J 100 V = 600V CE V = 600V T = 25°C, T =125°C 50 CE J J R = 5Ω R = 5Ω G G L = 100 µH L = 100 µH 0 0 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 I , COLLECTOR TO EMITTER CURRENT (A) I , COLLECTOR TO EMITTER CURRENT (A) CE CE FIGURE 9, Turn-On Delay Time vs Collector Current FIGURE 10, Turn-Off Delay Time vs Collector Current 100 160 R = 5Ω, L = 100µH, V = 600V R = 5Ω, L = 100µH, V = 600V G CE G CE 140 T = 125°C, V = 15V J GE 80 120 100 60 80 40 60 40 T = 25°C, V = 15V 20 J GE 20 T = 25 or 125°C,V = 15V J GE 0 0 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 I , COLLECTOR TO EMITTER CURRENT (A) I , COLLECTOR TO EMITTER CURRENT (A) CE CE FIGURE 11, Current Rise Time vs Collector Current FIGURE 12, Current Fall Time vs Collector Current 15000 12000 V = 600V V = 600V CE CE V = +15V V = +15V GE GE R = 5Ω R = 5Ω G G 10000 T = 125°C,V =15V J GE T = 125°C, V = 15V J GE 10000 8000 6000 5000 4000 2000 T = 25°C, V = 15V T = 25°C,V =15V J GE J GE 0 0 0 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 I , COLLECTOR TO EMITTER CURRENT (A) I , COLLECTOR TO EMITTER CURRENT (A) CE CE FIGURE 13, Turn-On Energy Loss vs Collector Current FIGURE 14, Turn Off Energy Loss vs Collector Current 20000 15000 V = 600V V = 600V CE CE E 150A on2, V = +15V V = +15V E 150A GE GE on2, T = 125°C R = 5Ω J G 12500 E 150A off, 15000 10000 E 150A 10000 7500 off, E 75A on2, E 75A on2, 5000 E 75A 5000 off, E 37.5A on2, E 75A E 37.5A off, on2, 2500 E 37.5A off, E 37.5A off, 0 0 0 10 20 30 40 50 0 25 50 75 100 125 R , GATE RESISTANCE (OHMS) T , JUNCTION TEMPERATURE (°C) G J FIGURE 15, Switching Energy Losses vs. Gate Resistance FIGURE 16, Switching Energy Losses vs Junction Temperature 050-7458 Rev A 10-2005 SWITCHING ENERGY LOSSES (µJ) E , TURN ON ENERGY LOSS (µJ) t RISE TIME (ns) t , TURN-ON DELAY TIME (ns) ON2 r, d(ON) SWITCHING ENERGY LOSSES (µJ) E , TURN OFF ENERGY LOSS (µJ) t FALL TIME (ns) t , TURN-OFF DELAY TIME (ns) OFF f, d (OFF) TYPICAL PERFORMANCE CURVES APT75GP120JDQ3 20,000 350 1,000 C ies 300 500 250 100 200 50 C oes 150 10 100 C res 50 0 0 0 10 20 30 40 50 0 200 400 600 800 1000 V , COLLECTOR-TO-EMITTER VOLTAGE (VOLTS) V , COLLECTOR TO EMITTER VOLTAGE CE CE Figure 17, Capacitance vs Collector-To-Emitter Voltage Figure 18,Minimim Switching Safe Operating Area 0.25 0.9 0.20 0.7 0.15 0.5 Note: 0.10 0.3 t 1 t 2 0.05 0.1 t 1 t Duty Factor D = / 2 SINGLE PULSE 0.05 Peak T = P x Z + T J DM θJC C 0 -5 -4 -3 -2 -1 10 10 10 10 10 1.0 RECTANGULAR PULSE DURATION (SECONDS) Figure 19a, Maximum Effective Transient Thermal Impedance, Junction-To-Case vs Pulse Duration 50 RC MODEL Junction temp (°C) 0.0221 0.0014 10 F = min (f , f ) max max2 max 0.05 Power f = 0.0498 0.0416 max1 5 (watts) t + t + t + t d(on) r d(off) f P - P diss cond f = T = 125°C max2 J E + E on2 off T = 75°C 0.158 0.543 C D = 50 % T - T J C V = XXXV P = CE diss Case temperature (°C) R R = 5Ω θJC G 1 20 35 50 60 80 95 110 I , COLLECTOR CURRENT (A) C FIGURE 19b, TRANSIENT THERMAL IMPEDANCE MODEL Figure 20, Operating Frequency vs Collector Current Z , THERMAL IMPEDANCE (°C/W) θJC C, CAPACITANCE ( F) P F , OPERATING FREQUENCY (kHz) MAX I , COLLECTOR CURRENT (A) C P DM 050-7458 Rev A 10-2005 APT75GP120JDQ3 10% Gate Voltage APT60DQ120 T = 125°C J t d(on) V V I CC C CE t r Collector Current 90% 5% 5% A 10% Collector Voltage Switching Energy D.U.T. Figure 21, Inductive Switching Test Circuit Figure 22, Turn-on Switching Waveforms and Definitions V TEST *DRIVER SAME TYPE AS D.U.T. 90% Gate Voltage A T = 125°C J t t V CE d(off) f Collector Voltage I C 90% 100uH V CLAMP B A 10% 0 DRIVER* D.U.T. Collector Current Switching Energy Figure 24, E Test Circuit Figure 23, Turn-off Switching Waveforms and Definitions ON1 050-7458 Rev A 10-2005 TYPICAL PERFORMANCE CURVES APT75GP120JDQ3 ULTRAFAST SOFT RECOVERY ANTI-PARALLEL DIODE MAXIMUM RATINGS All Ratings: T = 25°C unless otherwise specified. C Symbol APT75GP120JDQ3 Characteristic / Test Conditions UNIT I (AV) Maximum Average Forward Current (T = 105°C, Duty Cycle = 0.5) 60 F C I (RMS) RMS Forward Current (Square wave, 50% duty) Amps 88 F I Non-Repetitive Forward Surge Current (T = 45°C, 8.3ms) 540 FSM J STATIC ELECTRICAL CHARACTERISTICS Symbol UNIT Characteristic / Test Conditions MIN TYP MAX I = 75A 2.8 F Volts Forward Voltage I = 150A V 3.48 F F I = 75A, T = 125°C 2.17 F J DYNAMIC CHARACTERISTICS Characteristic Symbol Test Conditions MIN TYP MAX- UNIT Reverse Recovery Time t I = 1A, di /dt = -100A/µs, V = 30V, T = 25°C - 60 rr F F R J ns t Reverse Recovery Time - 265 rr I = 60A, di /dt = -200A/µs F F Q - 560 Reverse Recovery Charge nC rr V = 800V, T = 25°C R C I - 5 - Maximum Reverse Recovery Current Amps RRM t - 350 Reverse Recovery Time ns rr I = 60A, di /dt = -200A/µs F F Q - 2890 Reverse Recovery Charge nC rr V = 800V, T = 125°C R C I - 13 - Maximum Reverse Recovery Current Amps RRM t - 150 Reverse Recovery Time ns rr I = 60A, di /dt = -1000A/µs F F Q - 4720 - Reverse Recovery Charge nC rr V = 800V, T = 125°C R C I Maximum Reverse Recovery Current - 40 Amps RRM 0.60 0.9 0.50 0.7 0.40 0.30 0.5 Note: t 1 0.20 0.3 t 2 0.10 t 1 t Duty Factor D = / 0.1 2 SINGLE PULSE Peak T = P x Z + T J DM θJC C 0.05 0 -5 -4 -3 -2 -1 10 10 10 10 10 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 25a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL Junction temp. (°C) 0.148 0.006 Power 0.238 0.0910 (watts) 0.174 0.524 Case temperature. (°C) FIGURE 25b, TRANSIENT THERMAL IMPEDANCE MODEL Z , THERMAL IMPEDANCE (°C/W) θJC P DM 050-7458 Rev A 10-2005 APT75GP120JDQ3 200 400 T = 125°C J 120A V = 800V 180 R 350 160 300 140 60A T = 175°C J 250 120 30A 100 200 T = 125°C J 80 150 60 T = 25°C 100 J 40 T = -55°C J 50 20 0 0 0 1 2 3 4 0 200 400 600 800 1000 1200 V , ANODE-TO-CATHODE VOLTAGE (V) -di /dt, CURRENT RATE OF CHANGE(A/µs) F F Figure 26. Forward Current vs. Forward Voltage Figure 27. Reverse Recovery Time vs. Current Rate of Change 7000 50 T = 125°C J T = 125°C 120A J V = 800V R 45 V = 800V R 6000 120A 40 5000 35 30 4000 60A 25 3000 60A 20 30A 15 2000 30A 10 1000 5 0 0 0 200 400 600 800 1000 1200 0 200 400 600 800 1000 1200 -di /dt, CURRENT RATE OF CHANGE (A/µs) -di /dt, CURRENT RATE OF CHANGE (A/µs) F F Figure 28. Reverse Recovery Charge vs. Current Rate of Change Figure 29. Reverse Recovery Current vs. Current Rate of Change 1.2 100 Q Duty cycle = 0.5 rr T = 175°C t J 90 rr 1.0 80 t rr 70 0.8 60 I RRM 0.6 50 40 0.4 30 Q rr 20 0.2 10 0.0 0 0 25 50 75 100 125 150 25 50 75 100 125 150 175 T , JUNCTION TEMPERATURE (°C) Case Temperature (°C) J Figure 30. Dynamic Parameters vs. Junction Temperature Figure 31. Maximum Average Forward Current vs. CaseTemperature 350 300 250 200 150 100 50 0 1 10 100 200 V , REVERSE VOLTAGE (V) R Figure 32. Junction Capacitance vs. Reverse Voltage 050-7458 Rev A 10-2005 C , JUNCTION CAPACITANCE K , DYNAMIC PARAMETERS Q , REVERSE RECOVERY CHARGE I , FORWARD CURRENT J f rr F (pF) (Normalized to 1000A/µs) (nC) (A) I (A) I , REVERSE RECOVERY CURRENT t , REVERSE RECOVERY TIME F(AV) RRM rr (A) (ns) TYPICAL PERFORMANCE CURVES APT75GP120JDQ3 V r di /dt Adjust +18V F APT10035LLL 0V D.U.T. t Q 30µH / rr rr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 33. Diode Test Circui t 1 I - Forward Conduction Current F 1 4 2 di /dt - Rate of Diode Current Change Through Zero Crossing. F Zero 3 I - Maximum Reverse Recovery Current. RRM 5 0.25 I RRM 4 t - Reverse Recovery Time, measured from zero crossing where diode 3 rr current goes from positive to negative, to the point at which the straight 2 line through I and 0.25 I passes through zero. RRM RRM 5 Q - Area Under the Curve Defined by I and t . rr RRM rr Figure 34, Diode Reverse Recovery Waveform and Definitions ® SOT-227 (ISOTOP ) Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 8.9 (.350) 9.6 (.378) W=4.1 (.161) 7.8 (.307) W=4.3 (.169) 8.2 (.322) Hex Nut M4 H=4.8 (.187) (4 places) H=4.9 (.193) (4 places) 25.2 (0.992) r = 4.0 (.157) 4.0 (.157) 25.4 (1.000) 0.75 (.030) 12.6 (.496) (2 places) 4.2 (.165) 0.85 (.033) 12.8 (.504) (2 places) 3.3 (.129) 1.95 (.077) 3.6 (.143) 2.14 (.084) 14.9 (.587) * Emitter/Anode Collector/Cathode 15.1 (.594) 30.1 (1.185) * Emitter/Anode terminals are 30.3 (1.193) shorted internally. Current handling capability is equal 38.0 (1.496) for either Emitter/Anode terminal. 38.2 (1.504) * Emitter/Anode Gate Dimensions in Millimeters and (Inches) ® ISOTOP is a Registered Trademark of SGS Thomson. APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved. 050-7458 Rev A 10-2005
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the APT75GP120JDQ3 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Manufacturers


What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods