Manufacturers
MICRO/SYS USB1032
Description
Micro/Sys USB1032 - PIC32 Industrial Host StackableUSB Microcontroller
Part Number
USB1032
Price
Request Quote
Manufacturer
MICRO/SYS
Lead Time
Request Quote
Category
PRODUCTS - U
Specifications
Analog Features
16-channel 10-bit analog-to-digital converter. 500 KSPS conversion rate. Conversion available during sleep, idle. Two (2) analog comparators. 5.5V tolerant input pins (digital pins only)
Debug Features
2-wire ICSP interface with unobtrusive access and real-time data exchange with application.
Development Kit
Module. Complete cable set. Documentation, sample software.
Environmental
-40 to +85°C operating. -40° to +85°C storage. 5%-95% relative humidity, non-condensing.
External Connections
2-pin power terminal. StackableUSB. 20-pin header for COM1 and COM2. 6-pin ICSP debug port. 2x40-pin headers for I/O and peripherals.
Internal Electrical Interface
StackableUSB. USB 1.1 & 2.0 compatible, full-speed.
LEDs/Switches
Four (4) programmable user LEDs. One (1) reset header.
Mechanical
1.85” x 1.74” StackableUSB. ¼-Size 104™ Form Factor.
Peripheral Features
4-channel hardware DMA controller with automatic data size detection. USB 2.0 compliant full speed controller. USB has a dedicated DMA channel. Two (2) I2C modules. Two (2) UART modules with: RS232, RS485 and LIN 1.2 support. IrDA with on-chip hardware encoder and decoder. Parallel master and slave port. Hardware real-time clock/calendar. Five (5) 16-bit timers/counters (two 16-bit pairs combine to create two 32-bit timers). Five (5) capture inputs. Five (5) vompare/PWM outputs. Five (5) external interrupt pins. High-speed I/O pins capable of toggling at up to 80MHz. High-current sink/source (18 mA/18 mA) on all I/O pins. Configurable open-drain output on digital I/O pins.
Power Requirements
+5v ±5% at 100mA typical
Processor
MIPS32 M4K
Processor:
MIPS32 M4K 32-bit core. 80MHz, 1.56DMIPS/MHz. 5-stage pipeline, 32-bit ALU. Single-cycle multiply and high performance divide unit. User and kernel modes to enable robust embedded system. Prefetch cache module to speed execution from flash. 512KB Flash, 32KB SRAM.
Serial Ports
Two (2) RS232 available from 20-pin header.
Features
- -40° to +85°C operation
- 1.56 DMIPS/MHz performance
- 512KB Flash, 32KB SRAM memory
- 80MHz system clock
- Easy development with Microchip’s MPLAB IDE
- On-board RS232 transceiver
- Single-cycle multiply and high-performance divide unit
- Small 1.85” x 1.74” board
Datasheet
Extracted Text
PIC32™ Industrial Host StackableUSB™ Microcontroller USB1032 Features 9 80MHz system clock 9 1.56 DMIPS/MHz performance 9 512KB Flash, 32KB SRAM memory 9 Single-cycle multiply and high- performance divide unit 9 On-board RS232 transceiver 9 Easy development with Microchip’s MPLAB IDE 9 Small 1.85” x 1.74” board 9 -40° to +85°C operation The USB1032 is the ideal module for Available onboard is a host of control features applications requiring more performance than including 10-bit ADC, RS232, four (4) programmable typical micro-controllers have offered but not LEDs, and digital I/O. Developers will appreciate the needing the full blast offered by an SBC. Well- PIC32’s easy-to-use and solidly-supported software suited for applications confined to small, tight tools as they program and debug. spaces, the 125 DMIPS performance requires only The 1.85” x 1.74” module is USB 2.0 compliant 100mA power, considerably less than an SBC. providing users the advantages of plug-and-play The USB1032 is powered by the PIC32 micro- interfacing. The module stacks onto the top or bottom of any StackableUSB client single board controller whose USB 2.0 On-The-Go (OTG) computer or microcontroller forming a small, functionality allows the microcontroller to be rugged, embeddable system, ideal for harsh used as a Host. Operating as a Host device, environments. The USB1032 can be connected design engineers can easily and cost-effectively to desktop PCs and laptops via ICSP for stack StackableUSB client I/O devices onto the development. controller making a small, embedded controller ideally suited to harsh environments. Software/Driver Support Compatible Hardware Mounting/Packaging Windows XP, Vista StackableUSB Client devices ¼-Size 104™ Form Factor MPLAB IDE ICE Standoffs, STDOFFUSB MPLAB C32 C Compiler ICD3 USB Host stack Graphics & audio library 16- and 32-bit File System TCP/IP Stack Sample software Mixed I/O Mixed I/O 256K SPI PIC32 EEPROM Battery Backed RTC Reset Dual RS232 Header Power Input Specifications: Mechanical: Peripheral Features: 1.85” x 1.74” StackableUSB 4-channel hardware DMA controller ¼-Size 104™ Form Factor with automatic data size detection USB 2.0 compliant full speed controller Power Requirements: USB has a dedicated DMA channel +5v ±5% at 100mA typical Two (2) I2C modules Two (2) UART modules with: Environmental: • RS232, RS485 and LIN 1.2 support -40 to +85°C operating • IrDA® with on-chip hardware -40° to +85°C storage encoder and decoder 5%-95% relative humidity, non-condensing Parallel master and slave port Hardware real-time clock/calendar Processor: Five (5) 16-bit timers/counters (two 16-bit MIPS32® M4K™ 32-bit core pairs combine to create two 32-bit timers) 80MHz, 1.56DMIPS/MHz Five (5) capture inputs 5-stage pipeline, 32-bit ALU Five (5) vompare/PWM outputs Single-cycle multiply and high- Five (5) external interrupt pins performance divide unit High-speed I/O pins capable of User and kernel modes to enable toggling at up to 80MHz robust embedded system High-current sink/source (18 mA/18 Prefetch cache module to speed mA) on all I/O pins execution from flash Configurable open-drain output on 512KB Flash, 32KB SRAM digital I/O pins Serial Ports: Analog Features: Two (2) RS232 available from 20-pin 16-channel 10-bit analog-to-digital header converter 500 KSPS conversion rate LEDs/Switches: Conversion available during sleep, idle Four (4) programmable user LEDs Two (2) analog comparators One (1) reset header 5.5V tolerant input pins (digital pins only) 4 User LEDs StackableUSB ICSP Debug Features: Ordering Information: 2-wire ICSP interface with unobtrusive access and real-time data exchange OEM Single Board Computers: with application USB1032 PIC32 Industrial Host Microcontroller External Connections: CS1032 Complete cable set 2-pin power terminal 1032OPT1 Battery Backed RTC StackableUSB 1032OPT2 256K SPI EEPROM 20-pin header for COM1 and COM2 6-pin ICSP debug port Related Products: 2x40-pin headers for I/O and STDOFFUSB StackableUSB standoff kit peripherals BA4040 40-pin mixed I/O header breakout cable Internal Electrical Interface: BA2018 20-pin RS232 header to StackableUSB dual DB9 breakout USB 1.1 & 2.0 compatible, full-speed cable CA4142 ICSP programming/ Development Kit: debugging cable Module Complete cable set Documentation, sample software Development Board Kits* . DK1032 PIC32 Industrial Host Microcontroller; Windows- ready development kit *See Development Kit Specifications
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the USB1032 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods