Manufacturers
MICRO/SYS USB1024
Description
Micro/Sys USB1024 - PIC24 Industrial Host StackableUSB Microcontroller
Part Number
USB1024
Price
Request Quote
Manufacturer
MICRO/SYS
Lead Time
Request Quote
Category
PRODUCTS - U
Specifications
Analog Features
16-channel 10-bit analog-to-digital converter. 500 KSPS conversion rate. Conversion available during sleep, idle. Three (3) analog comparators with programmable input/output configuration. Charge Time Measurement Unit (CTMU).
Debug Features
2-wire ICSP interface with unintrusive access and real-time data exchange with application. 4-wire MIPS standard enhanced JTAG interface. Unintrusive hardware-based instruction trace. IEEE Std 1149.2 compatible (JTAG) boundary scan.
Development Kit
Module with all options installed. Complete cable set. Documentation, schematics, sample software.
Environmental
-40 to +85°C operating. -40° to +85°C storage. 5%-95% relative humidity, non-condensing.
External Connections
2-pin power terminal. StackableUSB. 20-pin header for RS232. 6-pin ICSP debug port. 6-pin JTAG debug port. 2x50-pin headers for I/O and peripherals.
Internal Electrical Interface
StackableUSB. USB 1.1 & 2.0 compatible, full-speed.
LEDs/Switches
Eight (8) programmable user LEDs. One (1) PB reset switch.
Mechanical
1.85” x 1.78” StackableUSB. ¼-Size 104 Form Factor.
Peripheral Features
Peripheral pin select: Allows independent I/O mapping of many peripherals at run time. Continuous hardware integrity checking and safety interlocks prevent unintentional configuration changes. Up to 44 available pins (100-pin devices). Three (3) 3-Wire/4-Wire SPI modules(supports 4 Frame modes) with 8-level FIFO buffer. Three (3) I2C modules support multi-master/slave modes and 7-bit/10-bit addressing. Four (4) UART modules with:RS485, RS232, LIN/J6202 protocols, and IrDA. IrDA with on-chip hardware encoder and decoder. Auto-wake-up and auto-baud detect (ABD). 4-level deep FIFO buffer. Five (5) 16-bit timers/counters with programmable prescaler. Nine (9) 16-bit capture inputs, each with a dedicated time base. Nine (9) 16-bit compare/PWM outputs, each with a dedicated time base. 8-bit parallel master port (PMP/PSP): Up to 16 address pins. Programmable polarity on control lines. Hardware real-time clock/calendar (RTCC): Provides clock, calendar and alarm functions. Programmable cyclic r
Power Requirements
+5v ±5% at 40mA typical.
Processor
Modified Harvard architecture Up to 16MIPS operation at 32MHz. 8MHz internal oscillator. 17-bit by 17-bit single-cycle hardware multiplier. 32-bit by 16-bit hardware divider. 16-bit by 16-bit working register array. C compiler optimized instruction set architecture with flexible addressing modes. Linear program memory addressing, up to 12Mbytes. Linear data memory addressing, up to 64Kbytes. Two (2) address generation units for separate read and write addressing of data memory.
Serial Ports:
RS232 available from 20-pin header.
Special Microcontroller Features
Self-reprogrammable under software control. 5.5V tolerant Input (digital pins only). Configurable open-drain outputs on digital I/O. High-current sink/source (18 mA/18mA) on all I/O. Selectable power management modes:Sleep, idle, and doze modes with fast wake-up. Fail-safe clock monitor operation: Detects clock failure and switches to on-chip, low-power RC oscillator. Power-on reset (POR), power-up timer (PWRT), low-voltage detect (LVD) and oscillator start-up timer (OST). Flexible watchdog timer (WDT) with on-chip. low-power RC oscillator for reliable operation. Brown-out reset (BOR). Flash program memory: 10,000 erase/write cycle endurance (minimum). 20-year data retention minimum • Selectable write protection boundary. Write protection option for Flash configuration words.
Features
- -40° to +85°C operation
- 16 MIPS performance
- 256KB Flash, 16KB SRAM memory
- 32MHz system clock
- Easy development with Microchip’s MPLAB IDE
- On-board RS232 transceiver
- Single-cycle multiply and high-performance divide unit
- Small 1.85” x 1.78” board
Datasheet
Extracted Text
PIC24™ Industrial Host StackableUSB™ Microcontroller USB1024 Features 9 32MHz system clock 9 16 MIPS performance 9 256KB Flash, 16KB SRAM memory 9 Single-cycle multiply and high- performance divide unit 9 On-board RS232 transceiver 9 Easy development with Microchip’s MPLAB IDE 9 Small 1.85” x 1.78” board 9 -40° to +85°C operation The USB1024 is a moderate-performance Available onboard is a host of control features USB Host microcontroller board designed for including 16-channel, 500ksps 10-bit ADC, low-power projects. Well-suited for RS232, 8 programmable LEDs, and abundant applications confined to small, tight spaces, digital I/Os. Developers will appreciate the the 16MIPS performance typically requires PIC24’s easy-to-use and solidly-supported only 40mA power - figure small enough for software tools as they program and debug. battery-powered applications. The 1.85” x 1.78” module is USB 2.0 compliant The USB1024 is powered by the PIC24 micro- providing users the advantages of plug-and-play controller whose USB 2.0 On-The-Go (OTG) interfacing. The module stacks onto the top or functionality allows the microcontroller to be used bottom of any StackableUSB client single board as a Host. Operating as a Host device, design computer or microcontroller forming a small, engineers can easily and cost-effectively stack rugged, embeddable system, ideal for harsh StackableUSB client I/O devices onto the environments. The USB1024 can be connected controller making a small, embedded controller to desktop PCs and laptops via ICSP connector ideally suited to harsh environments. for development. Software/Driver Support Compatible Hardware Mounting/Packaging Windows XP, Vista StackableUSB Client devices ¼-Size 104™ Form Factor MPLAB IDE ICE Standoffs, STDOFFUSB MPLAB C30 C Compiler ICD2, ICD3 USB Host stack Graphics & audio library 16- and 32-bit File System Sample software Power Mixed I/O Input RS232 PIC24 Mixed I/O Specifications: Mechanical: LEDs/Switches: 1.85” x 1.78” StackableUSB Eight (8) programmable user LEDs ¼-Size 104™ Form Factor One (1) PB reset switch Power Requirements: Peripheral Features: +5v ±5% at 40mA typical Peripheral pin select: • Allows independent I/O mapping of Environmental: many peripherals at run time -40 to +85°C operating • Continuous hardware integrity -40° to +85°C storage checking and safety interlocks 5%-95% relative humidity, non-condensing prevent unintentional configuration changes Processor: • Up to 44 available pins (100-pin Modified Harvard architecture devices) Up to 16MIPS operation at 32MHz Three (3) 3-Wire/4-Wire SPI modules 8MHz internal oscillator (supports 4 Frame modes) with 8- 17-bit by 17-bit single-cycle hardware level FIFO buffer multiplier Three (3) I2C modules support multi- 32-bit by 16-bit hardware divider master/slave modes and 7-bit/10-bit 16-bit by 16-bit working register array addressing C compiler optimized instruction set Four (4) UART modules with: architecture with flexible addressing • RS485, RS232, LIN/J6202 modes protocols, and IrDA® Linear program memory addressing, • IrDA with on-chip hardware encoder up to 12Mbytes and decoder Linear data memory addressing, up to • Auto-wake-up and auto-baud detect 64Kbytes (ABD) Two (2) address generation units for • 4-level deep FIFO buffer separate read and write addressing of Five (5) 16-bit timers/counters with data memory programmable prescaler Nine (9) 16-bit capture inputs, each Serial Ports: with a dedicated time base RS232 available from 20-pin header StackableUSB ICSP JTAG Nine (9) 16-bit compare/PWM outputs, Analog Features: each with a dedicated time base 16-channel 10-bit analog-to-digital 8-bit parallel master port (PMP/PSP): converter 500 KSPS conversion rate • Up to 16 address pins Conversion available during sleep, idle • Programmable polarity on control Three (3) analog comparators with lines programmable input/output Hardware real-time clock/calendar configuration (RTCC): Charge Time Measurement Unit (CTMU) • Provides clock, calendar and alarm functions Debug Features: Programmable cyclic redundancy 2-wire ICSP interface with unintrusive check (CRC) generator access and real-time data exchange Up to 5 external interrupt sources with application 4-wire MIPS standard enhanced Special Microcontroller Features: JTAG interface Self-reprogrammable under software Unintrusive hardware-based control instruction trace 5.5V tolerant Input (digital pins only) IEEE Std 1149.2 compatible (JTAG) Configurable open-drain outputs on boundary scan digital I/O High-current sink/source (18 mA/18 External Connections: mA) on all I/O 2-pin power terminal Selectable power management modes: StackableUSB • Sleep, idle, and doze modes with 20-pin header for RS232 fast wake-up 6-pin ICSP debug port Fail-safe clock monitor operation: 6-pin JTAG debug port • Detects clock failure and switches 2x50-pin headers for I/O and to on-chip, low-power RC oscillator peripherals Power-on reset (POR), power-up timer (PWRT), low-voltage detect Internal Electrical Interface: (LVD) and oscillator start-up timer StackableUSB (OST) USB 1.1 & 2.0 compatible, full-speed Flexible watchdog timer (WDT) with on-chip. low-power RC oscillator for Development Kit: reliable operation Module with all options installed Brown-out reset (BOR) Complete cable set Flash program memory: Documentation, schematics, sample • 10,000 erase/write cycle endurance software (minimum) • 20-year data retention minimum • Selectable write protection boundary • Write protection option for Flash configuration words Ordering Information: OEM Single Board Computers: USB1024 PIC24 Industrial Host Microcontroller CS1024 Complete cable set Related Products: STDOFFUSB StackableUSB standoff kit BA4052 50-pin mixed I/O header breakout cable BA2017 20-pin RS232 header to DB9 breakout cable CA4142 ICSP programming/ debugging cable TB50550 50-pin screw terminal breakout board Development Board Kits* . DK1024 PIC24 Industrial Host Microcontroller; Windows- ready development kit *See Development Kit Specifications
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the USB1024 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods