Ethernet and Fast Ethernet Flexible 10Mbps and 100Mbps media, speed, and distance solutions Layer 1 to Layer 1 10Mbps or 100Mbps unit (R141) • Copper-to-fiber and fiber-to-fiber • 2km, 20km, 40km and 100km • NEBS Level 3 certifi ed (R133 line cards) • Fully IEEE 802.3 compliant Flexible Managed Solutions for Mixed-Media Networks Metrobility's Ethernet and Fast Ethernet interface 10Mbps - Preconfigured The Metrobility® Difference The Radiance R111 and 2111 preconfigured media products offer versatile speed, media, distance, and converter offers transparent integration of fiber optic con- redundancy options to cost-effectively distribute fiber Managed options - NetBeacon® nectivity or copper-to-coaxial integration for 10Mbps Ethernet optic connections. These units provide seamless connec- and WebBeacon™ - when con- networks. figured with a management card tivity within the LAN, or between the LAN and public or Key features include: in a Radiance chassis private networks. The devices are available as a precon- • 820nm multimode fi ber support Unique troubleshooting features figured 10Mbps unit, a selectable 10 or 100Mbps unit, • Transparency mode for automatic link loss detection at both ends of the link (x111-xx-B only) or Link a preconfigured 100Mbps unit, or an autonegotiating High-quality, reliable design low- Loss Carry Forward 1 ers long term cost of ownership 10/100Mbps unit. • Full or half-duplex support Full signal restoration - with low These mixed-media devices offer seamless inte- • Distances up to 2km bit delay - allows for maximum gration of copper and fi ber connections providing 10 and 100Mbps - DIP-switch or software settable segment length full signal restoration for accurate data transmission The Radiance R141 is a transparent two-port, copper-to- Class B certified models and maximum cable length support. Singlemode-to- fi ber media converter that can be set to either 10Mbps on both multimode fi ber conversion also provides distance ports or 100Mbps on both ports. Offered only as an interface Product Highlights line card, standalone versions require either an R200 or R400 extension capabilities which enable network builders to chassis. leverage existing multimode infrastructure while taking Key features include: Complete range of fiber optic advantage of the distance capabilities of singlemode • 1310nm multimode and singlemode fi ber support connector types provide network fi ber. • Transparency mode for automatic link loss detection design flexibility Metrobility Ethernet and Fast Ethernet devices are at both ends of the link Interoperates with half-duplex or available as interface line cards or standalone units for • Duplex autonegotiation full-duplex mode devices • Single-strand, bi-directional wavelength multiplex- flexibile integration into your network. Strict standards compliance ing (BWDM) option ensures compatibility with other The interface line cards are supported in all • Distances up to 20km vendors’ equipment for fl exible Metrobility's Radiance chassis and can be managed connectivity 100Mbps Fast Ethernet - Preconfigured when configured with a management card. DC ver- The R133, R131, 2133, 2131 and M133 family of media sions of the R5000 and R1000 are NEBS certified. The converters offers the widest range of options for Fast Ethernet R200 and R400 are standalone chassis that also can connectivity. be rackmounted either as single units or two units. Key features include: • Copper-to-fi ber and fi ber-to-fi ber options, 1310nm The standalone options utilize a rugged fabrica- and 1550nm tion to offer superior reliability for the most demanding • Software-controlled or DIP-switch enabled remote environments. Each standalone is equipped with an loopback and Far End Fault (x133 only) external, universal AC power supply. • Link Loss Carry Forward • Full or half duplex, or autonegotiation (x133 only) 1 • Single-strand, bi-directional wavelength multiplex- Information on the 10/100Mbps product line is available in a sepa- rate datasheet. The 10/100Mbps product is configured with a switch ing (BWDM) option chip which allows it to support both media conversion and autonegotia- • Distances up to 100km tion. As a Layer 2 device, the device offers additional troubleshooting capabilities including LLCF, LLR and AutoRecovery. Network Configuration Layer 2 or 3 Copper Switch Copper NetBeacon Element Management Software R5000 Chassis 10M or 100M Standalone Workgroup Switch (21xx) 10M or 100M Interface Line Card 10M or 100M SM or MM Fiber Management • Comprehensive monitoring and control for flexible management • Real-time data collection • Workstation-based and browser-based options • RADIUS (Remote Authentication Dial-In Service) enables authentication, authorization and accounting of multiple users An SNMP agent embedded in the management card communicates with Workstation-Based Element Management Software the NetBeacon software to provide management statistics, control functions, and NetBeacon® Element Management Software (EMS) supports complete alert network administrators to alarm conditions. Extensive real-time information monitoring and control for all of Metrobility's Radiance chassis-based line cards. on MIB-II and Metrobility-specific MIB objects — plus alarm thresholds and NetBeacon utilizes an R502-M management card which is connected through the notification procedures — enable early problem identification, fast fault isolation backplane to the line cards in the chassis. and proactive management. As an alternative to the command line interface (CLI) and/or SNMP-based applications, NetBeacon enables network managers to perform all platform configuration updates, maintenance, and diagnostics from a central management Browser-Based Element Management Software station. WebBeacon Element Management System is a web browser-based element NetBeacon can be used to: and service provisioning software enabled through an embedded kernel which • Display device information resides on the management card. (See Management Hardware data sheet). • Configure a device WeBeacon offers the same features found in NetBeacon and provides an efficient, • Monitor the chassis user-friendly way to manage and configure a single Metrobility® chassis through • Ping a device an Internet connection. • Open a telnet session • Download software to a device • Send email notifications 10Mbps and 100Mbps Single Interface Connectivity Solutions LINE CARD SPEED WAVELENGTH DISTANCE CONNECTOR FIBER TYPE STANDALONE OPTIONS 10Mbps - Pre-configured R111-12 x 100m 185m RJ-45 BNC - - 2111-12-01 R111-13-B x x 100m 2km RJ-45 SC - mm x x 2111-13-B R111-15-B x x 100m 2km RJ-45 ST - mm x x 2111-15-B 10 and 100Mbps - DIP-switch or Software Settable R141-13 x x x 100m 2km RJ-45 SC - mm x x Use line card in R200 chassis R141-14 x x x 100m 20km RJ-45 SC - sm x x Use line card in R200 chassis x 5km R141-15 x 100m RJ-45 ST - mm x x Use line card in R200 chassis x 2km R141-16 x x x 100m 20km RJ-45 ST - sm x x Use line card in R200 chassis R141-1X x x x x 100m 20km RJ-45 SC - sm/bwdm x x Use line card in R200 chassis R141-1Y x x x x 100m 20km RJ-45 SC - sm/bwdm x x Use line card in R200 chassis 100Mbps Copper-to-Fiber - Pre-configured R133-13 x x 100m 2km RJ-45 SC - mm x x x x x x 2133-13-01 or M133-13 R133-14 x x 100m 20km RJ-45 SC - sm x x x x x x 2133-14-01 or M133-14 R133-15 x x 100m 2km RJ-45 ST - mm x x x x x x 2133-15-01 or M133-15 R133-16 x x 100m 20km RJ-45 ST - sm x x x x x x 2133-16-01 or M133-16 R133-17 x x 100m 40km RJ-45 SC - sm x x x x x x 2133-17-01 or M133-17 R133-1E x x 100m 2km RJ-45 MTRJ - mm x x x x x x 2133-1E-01 or M133-1E R133-1J x x 100m 100km RJ-45 SC - sm x x x x x x 2133-1J-01 or M133-1J R133-1K x x 100m 2km RJ-45 LC - mm x x x x x x 2133-1K-01 or M133-1K R133-1M x x 100m 20km RJ-45 LC - sm x x x x x x 2133-1M-01 or M133-1M R133-1X x x x 100m 20km RJ-45 SC - sm/bwdm x x x x x x 2133-1X-01 R133-1Y x x x 100m 20km RJ-45 SC - sm/bwdm x x x x x x 2133-1Y-01 100Mbps Fiber-to-Fiber - Pre-configured R131-33 x x 2km 2km SC SC mm mm x 2131-33-01 R131-34 x x 2km 20km SC SC mm sm x 2131-34-01 R131-36 x x 2km 20km SC ST mm sm x 2131-36-01 R131-44 x x 20km 20km SC SC sm sm x 2131-44-01 R131-47 x x 20km 40km SC SC sm sm x 2131-47-01 R131-54 x x 2km 20km ST SC mm sm x 2131-54-01 R131-55 x x 2km 2km ST ST mm mm x 2131-55-01 R131-56 x x 2km 20km ST ST mm sm x 2131-56-01 R131-66 x x 20km 20km ST ST sm sm x 2131-66-01 R131-77 x x 40km 40km SC SC sm sm x 2131-77-01 x x x 20km 100km SC SC x R131-4J sm sm 2131-4J-01 R131-JJ x x 100km 100km SC SC sm sm x 2131-JJ-01 Other 10Mbps and 100Mbps Solutions See separate data sheets for the following options: 100Mbps Access Line Cards Patented Line Protection and Restoration 10/100Mbps AutoTwister with rate adaption Access Line Cards provide the ability to Metrobility's patented dual port interface The AutoTwister is a Layer 2 device reach across a metropolitan area network to line cards and standalone units offer redundant which provides media conversion and 10/ communicate, test and reconfigure a remote data paths for line protection and restoration 100 rate adaption in a single unit, extending device, without reducing the available band- (LPR) to prevent data loss due to cable failure, copper-based networks up to 100km over width to the customer site. port failure, or catastrophic switch failures. singlemode fiber. 10Mbps 100Mbps 820nm 1310nm 1550nm PORT 1 PORT 2 PORT 1 PORT 2 PORT 1 PORT 2 Class B NEBS Level 3 Link Loss Carry Forwad Far End Fault Transparency Mode Remote Loopback Duplex Auto-Negotiation Delta Class "twister" (M133) The 100Mbps Delta Class "twister" is a standalone devices that incorporates a lightweight, impact resistant enclosure that is made of high durability, fade resistant engineered plastic. The unit is wall mountable and provides channels for cable Metrobility Optical Systems, Inc. and power cord management and cable protection. Link and activity LEDs 25 Manchester Street are easily viewed on the top cover. Merrimack, NH USA 03054 For Delta Class "twister" specifications, see the Delta Class "twister" phone 1.603.880.1833 data sheet or user manual. fax 1.603.594.2887 www.metrobility.com Radiance Chassis Options R200: Single slot unit with an internal AC or DC • power supply for continuous uptime R R5 50 00 00 0 Metrobility Optical Systems is R400: Two-slot unit with an optional second • • • power supply for continuous uptime an innovative next generation optical networking company R R2 20 00 0 R1000: Two-slot 19" 1U rack-mount with single or dual AC • • • R R4 40 00 0 whose focus is on deliver- or DC power options ing optical access platforms R5000: 17-slot 2U rack-mount with an optional redundant R1000 • and to harness the power of AC or DC power supply for continuous uptime Ethernet and fiber optics to For industrial applications, see Metrobility's RD20 DIN-rail • deliver superior network edge chassis Accessories access, connectivity and wave- length multiplexing solutions. 2100-WM Wall-mount kit for 21xx standalone R200-WM-1 Wall-mount kit for the R200 or R400 R200-RM-1A 19" rack-mount kit (ears) for single R200 or R400 R200-RM-2A 19" rack-mount kit (tray) for two R200 or R400 R200-RM-EXT23 23" rack-mount extension kit (ears) for the R200-RM-1A and R200-RM-2A The information in this publication is accurate as of its publication date; such information is subject to change without notice. Metrobility Optical Systems is not responsible for any inadvertent errors. Metrobility, Metrobility Optical Systems, Specifications Lancast, AutoTwister, MicroChassis, “twister,” and NetBeacon are registered trademarks, and “redundant twister” and WebBeacon are trade- Environmental Standards Compliance IEEE 802.3/IEEE 802.3u marks of Metrobility Optical Systems. All other Operating Temperature 0°C to 50°C trademarks are the property of their respective owners. -20°C to 70°C (R133 only) Safety and EMC Compliance Operating Humidity 5% to 95% non-condensing Copyright 2003 Revised December 2004 UL Metrobility Optical Systems, Inc. Storage Temperature -25°C to 70°C CE Printed in U.S.A. -30°C to 70°C (R133 only) CSA CB EN60950 (safety) Standalone (21xx) FCC Part 15, Class A (x111, x133, x131) Dimensions 4.8”L x 3.3”W x 1.7”H FCC Part 15, Class B (R141) 12.3cm x 8.3cm x 4.3cm EN55022 Class A emissions (x111, x133, x131) Weight 1 lb; .45 kg EN55022 Class B emissions (R141) ICES-003 Class A emissions (x111, x133, x131) Power, Universal 90-250V AC 50/60Hz ICES-003 Class B emissions (R141) EN55024: 1998 (immunity) IEC 825-1 Classification A6285 ISO 9001 Class 1 Laser Product Metrobility Optical Systems,Inc.