T1/E1 Interface Extending T1/E1 distance up to 100km • Copper-to-multimode fiber conversion to 2km, or copper-to singlemode fiber conversion up to 100km • AMI or B8ZS (T1)/HDB3 (E1) bipolar line code support on the copper interface • Local and remote loopback monitoring and BERT 511 testing • No jitter for maximum transmission quality • Eight LED indicators for easy visual diagnostics • MDI-II to MDI-X switch on the copper port eliminates the need for crossover cables T1/E1 Copper-to-Fiber The standalone version is enclosed in a Product Highlights The Metrobility® T1/E1 interface provides rugged metal fabrication to offer superior reli- Extends T1/E1 distances up to ability for the most demanding environments. cost effective high-speed integration and con- 100km without repeaters Each standalone is equipped with an external, version of T1 (1.544Mbps) or E1 (2.048Mbps) Local and remote loopback capability universal AC power supply. serial copper telco communication lines to fiber ST or SC connectors on the fiber optic ports Extensive SNMP Management optic links. The T1/E1 interface line card can Metrobility's easy to use NetBeacon® Management statistics including: connect to PBX's, multiplexers, ATM/Frame Built-in BERT element management software provides end- Relay devices, routers, network servers and Far end fiber fault (FEF) to-end remote management to easily monitor Bit error rate video CODECS achieving extended distances, Bipolar violations framing errors, parity errors, CRC errors, bipolar high density, high quality of transmission, and Automatically transmits all ones over violations, and far end fault alarms. NetBeacon improved security. fiber link (TAOS) displays information about port type (T1/E1), Regardless of line codes or framing, the Signal retiming, regeneration and reamplification for maximum transmit code configuration, line length con- copper data stream is converted to optical transmission quality figuration, line status, and loopback status signals for greater noise immunity and longer Supports all common line codes as well as standard information such as serial transmission. The T1/E1 interface line card Optional network management with number, revision level, date installed, etc. supports remote fiber optic links up to 2km NetBeacon Element Management System 3.1 or higher or any standard Unique Remote Test Capability over multimode (1310nm) and 100km over SNMP management system The T1/E1 Interface provides time and singlemode fiber (1550nm). The T1/E1 is Remote monitoring via the web using cost saving features such as local and remote available in a bi-directional wavelength divi- the WebBeacon management kernel loopback testing, built-in BERT (Bit Error Rate sion multiplexing (BWDM) model. T1/E1 RJ-45 copper to multimode or singlemode conversion Testing) and intelligent software management. The T1/E1 interface operates seamlessly Low power consumption A service technician can initiate out-of-band with low bit delay, and all signal activity is loopback by using NetBeacon to set the fiber High MTBF converted ensuring accurate communication port in loopback mode. For remote trouble- within connected segments NEBS Level III compliant shooting, the on-board BERT routine can be Flexible Platform Options used to determine line quality. All errors will These modular interfaces are supported in Metrobility chassis. DC versions of the R5000 generate fault messages for diagnostic action and R1000 chasis are NEBS certified. and can be accomplished without a technician visiting the far end location. PBX Configuration Metrobility Optical Systems, Inc. 1.5km 1.5km T1/E1 25 Manchester Street T1/E1 PBX PBX R400 R400 Merrimack, NH USA 03054 phone 1.603.880.1833 2km multimode fiber fax 1.603.594.2887 100km singlemode www.metrobility.com T1/E1 Router Configuration Metrobility Optical Systems is an innovative next generation 1.5km 1.5km T1/E1 T1/E1 optical networking company R5000 R5000 router PBX whose focus is on deliver- 2km multimode fiber ing optical access platforms 100km singlemode and to harness the power of T1/E1 Copper Ethernet and fiber optics to Fiber deliver superior network edge NOTE: Maximum distances shown, distances may vary based on cable plant installations access, connectivity and wave- lenght multiplexing solutions. The information in this publication is accurate as T1/E1 Models Specifications of its publication date; such information is subject Standalone: Max. Supported to change without notice. Metrobility Optical Power (input) +5.0vdc @ 1.0 A, 5W average Systems is not responsible for any inadvertent Segment Length errors. Metrobility, Metrobility Optical Systems, * Oper. Temp. 0°C to 55°C Line Card Standalone Port 1 Port 2 Port 1 Port 2 Lancast, AutoTwister, MicroChassis, “twister,” Storage Temp. -30°C to 70°C and NetBeacon are registered trademarks, and R105-13 2105-13-01 T1 copper T1 fiber “redundant twister” and WebBeacon are trade- Relative Humidity 5% to 95% non-condensing RJ-45 multimode SC 1.5km 2km marks of Metrobility Optical Systems. All other Weight 3 lb, 1.36kg trademarks are the property of their respective R105-14 2105-14-01 T1 copper T1 fiber Dimensions 4.83”L x 3.26”W x 1.71”H owners. RJ-45 singlemode SC 1.5km 15km 12.3 cm x 8.3 cm x 4.3 cm Copyright 2001 Revised February 2004 Metrobility Optical Systems, Inc. R105-15 2105-15-01 T1 copper T1 fiber Printed in U.S.A. RJ-45 multimode ST 1.5km 2km Network Connections R105-16 2105-16-01 T1 copper T1 fiber RJ-45 singlemode ST 1.5km 15km Twisted Pair Interface Connector Shielded RJ-45, 8 pin jack R105-17 2105-17-01 T1 copper T1 fiber, LH RJ-45 singlemode SC 1.5km 40km Impedance 100 Ohms T1 (balanced pair) R105-1J 2105-1J-01 T1 copper T1 fiber ELH 120 Ohms E1 (balanced pair) RJ-45 singlemode SC 1.5km 100km Link Length Up to 1,310 feet (short haul) R165-13 2165-13-01 E1 copper E1 fiber Up to 4,500 feet (22.5 dbm) (long haul CSU) RJ-45 multimode SC 1.0km 2km R165-14 2165-14-01 E1 copper E1 fiber Multimode Fiber Interface RJ-45 singlemode SC 1.0km 15km Connector ST or SC R165-15 2165-15-01 E1 copper E1 fiber Link Length Up to 2km full duplex RJ-45 multimode ST 1.0km 2km Rx Input Sensitivity -31dbm peak minimum R165-16 2165-16-01 E1 copper E1 fiber RJ-45 singlemode ST 1.0km 15km Output Power -20 dbm to -14 dbm R165-17 2165-17-01 E1 copper E1 fiber, LH RJ-45 singlemode SC 1.0km 40km Singlemode Fiber Interface Connector ST or SC R165-1J 2165-1J-01 E1 copper E1 fiber ELH RJ-45 singlemode SC 1.0km 100km Link Length 15km 40km 100km BWDM Output Power -23 to -17 -5 to 0 -3 to 0 R105-1X 2105-1X-01 T1 100BASE-FX 20km Rx Input RJ-45 singlemode SC 1550/1310 Sensitivity R105-1Y 2105-1Y-01 T1 100BASE-FX 20km (dbm peak min) -32.5 -35 -37 RJ-45 singlemode SC 1310/1550 ISO 9001 R165-1X 2165-1X-01 E1 100BASE-FX 20km A6285 Additional specifications for the BWDM models, including copper port RJ-45 singlemode SC 1550/1310 and fiber port specifications, may be found in the BWDM User Manual. R165-1Y 2165-1Y-01 E1 100BASE-FX 20km RJ-45 singlemode SC 1310/1550 Metrobility Optical Systems,Inc. * - Connector is an 8-pin modular jack wired as RJ-48