F9 Data Sheet - 2004-10-06 F9 - 3U CompactPCI PentiumM SBC u Pentium M (LV) up to 1.8 GHz u Celeron M (ULV) 600 MHz u 1-slot 32-bit CompactPCI system master u 1 GB DDR RAM (SO-DIMM), CompactFlash u Graphics controller / DVI-I (front) u Gigabit Ethernet (front) u Dual USB 2.0 (front) u COM 1, IDE, 2 USB, keyboard/mouse via rear I/O Equipped with either the Intel (LV) Pentium M (Banias, displays and CRT monitors (D-Sub connector optional). Dothan) or the Celeron M processor, the 3U single-The F9 is also equipped with a Gigabit Ethernet board computer is a versatile 4HP/3U (single size controller. The onboard CompactFlash socket allows for Eurocard) CompactPCI board, designed especially for utilization of a CompactFlash card or an IBM systems which require low power consumption.Microdrive. A local expansion interface connector may Available either with the 1.8-GHz Pentium M Dothan745, be used to directly attach a companion I/O board, or the 1.4-GHz low-voltage Pentium M Dothan, or the which can carry in addition a 2.5" hard-disk drive. As 1.6-GHz Pentium M Banias, or the 1.1-GHz low voltage an option, rear I/O across the J2/P2 connector is Pentium M Banias, or a 600-MHz Celeron M processor and available. up to 1 GB RAM, the F9 covers a wide range of Equipped with a PCI-bridge chip, the F9 offers a full industrial applications.CompactPCI interface for reliable system expansion. The DVI-I video interface allows for attachment of Last but not least, the F9's Phoenix BIOS was both advanced (digital) and legacy (analog) flat panel especially designed for embedded system applications. ® 1 Embedded Solutions F9 Data Sheet - 2004-10-06 Technical Data CompactPCI Bus · Data throughput up to 480Mbits/s • 3U CompactPCI CPU board PICMG Spec. 2.0 R3.0 compliant Mass Storage • 32-bit CompactPCI system slot functionality with 7 • Fast IDE ports possible external loads · One IDE hard-disk/CD-ROM port via ribbon cable connector • PCI-to-PCI bridge Ultra ATA/100; for connection to mezzanine expansion • Single-slot solution board with onboard hard disk drive or external device • V(I/O): +5V (+3.3V on request) (Secondary IDE) CPU · One IDE port for local CompactFlash (Secondary IDE) • Intel Celeron M (ULV) or Pentium M Banias or Pentium M · One IDE port via rear I/O transition module (Primary IDE) Dothan Rear I/O Options • 600MHz..1.8GHz • Via rear I/O transition module Chipset • Primary IDE • Intel i855 chip set consisting of: • Two USB 2.0 ports · 82855GME Graphics/Memory Controller Hub (GMCH) • Keyboard/mouse · 82801D I/O Controller Hub (ICH4) • COM1 (TTL level) · 82802 Firmware Hub (FWH) • Gigabit Ethernet (option) • VGA analog video (option) Graphics • Integrated VGA graphics controllerFurther Options - Only on Request · Connection at front panel or via rear I/O / transition • F9 for 64-bit CompactPCI systems only in combination with module special rear I/O and extension board versions · Maximum resolution: 2048 x 1536, 16M colors • Extension possibility for F9 to 6U height · PanelLink Digital technology • Second Ethernet port via special I/O extension board • More different legacy I/O combinations via special I/O Memory extension board • CPU L2 Cache • One-piece 3U/8TE front panel for F9 in combination with · Celeron M: 512KB different I/O extension boards · Pentium M Banias: 1MB · Pentium M Dothan: 2MBElectrical Specifications • Up to 1 GB DRAM • Supply voltage/power consumption: · One 200-pin SO-DIMM socket for DDR SDRAM modules · +5V (4.85V..5.25V), 5.8A max. @ 1.6GHz (0.96A WinXP idle · PC2100/2700 mode) · DDR266/333-SDRAM · +3.3V (3.2V..3.47V), 3.5A max. @ 1.6GHz (2.1A WinXP idle • CompactFlash interface mode) · Type I and Type II • MTBF: tbd. @ 50°C · True IDE Mechanical Specifications · For CFA ATA memory card or Microdrive • Dimensions: conforming to CompactPCI specification for 3U Interfaces boards • 10/100/1000Mbits/s Gigabit Ethernet controller • Weight: tbd. · RJ45 interface at front panel or via rear I/O transition Environmental Specifications module • Temperature range (operation): · Two display LEDs in RJ45 connector to signal LAN Link and · 0..+60°C Activity status · Industrial temperature range on request · Supports network boot · Airflow: min. 10m³/h • USB 2.0 interfaces • Temperature range (storage): -40..+85°C · Conforming to Open HCI 1.0a • Relative humidity (operation): max. 95% non-condensing · Two ports via Type A connectors at front panel • Relative humidity (storage): max. 95% non-condensing · Two ports via rear I/O transition module ® 2 Embedded Solutions F9 Data Sheet - 2004-10-06 Technical Data • Altitude: -300m to + 3,000m • Shock: 15g/11ms • Bump: 10g/16ms • Vibration (sinusoidal): 2g/10..150Hz Safety • PCB manufactured with a flammability rating of 94V-0 by UL recognized manufacturers EMC • Tested according to EN 55022 / 1999-05 (radio disturbance) and EN 55024 / 1999-05 (immunity) with regard to CE conformity Software Support • Phoenix BIOS, single or dual FWH (8/16-Mbit Flash Memory) ® 3 Embedded Solutions F9 Data Sheet - 2004-10-06 Diagram ® 4 Embedded Solutions F9 Data Sheet - 2004-10-06 Related Products Standard Hardware 02F009E00 F9E, 1-slot 3U I/O extension for F9 with PS/2 keyboard/mouse, USB, 1 COM, audio, prepared for 2.5" hard disk (replaces CompactFlash facility), mounting on top or bottom of F9, 0..+60°C 02F009-00 F9, 3U 4HP 32-bit CompactPCI system slot SBC with ULV Celeron M 600MHz (512KB L2 cache, 7W), SO-DIMM slot, CompactFlash slot, 1 Gigabit Ethernet (front), 2 USB 2.0 (front), CRT/LCD graphics (DVI-I front); operation temperature 0..+60°C 02F009-01 F9, 3U 4HP 32-bit CompactPCI system slot SBC with LV Pentium M 1.4GHz (Dothan 738 with 2MB L2 cache, 10W), SO-DIMM slot, CompactFlash slot, 1 Gigabit Ethernet (front), 2 USB 2.0 (front), CRT/LCD graphics (DVI-I front); operation temperature tbd. F9 offers different combination possibilities with I/O extension and rear I/O cards. Please refer to our 3U CompactPCI compare chart for a selection of further single-board computers with different processors and on-board functionality. Systems & Card Cages Disk drives for basic systems are delivered as requested. Different rack sizes, power supplies and backplanes on request. Accessories 05A000-10 Keyboard/mouse Y-cable 0.1m, 6-pin Mini DIN plug to two 6-pin Mini DIN receptacles 05F007-02 DVI-to-VGA cable, DVI plug to 15-pin HD-Sub plug, 2m, -40..+85°C 05F007-03 Adapter, DVI analog plug to VGA 15-pin HD-Sub receptacle, -20..+85°C 0501-0001 DVI-I to DVI-D and VGA Y-adapter cable (for example for D4, F7/N, F8, F9, P17) You can download the data sheet for hard disk 0710-0012 from MEN's website. 0710-0009 IDE hard disk 2.5", 9.5mm, 20GB; for mounting on-board (harddisk mounting kit may be additionally required) 0710-0012 Industrial IDE hard disk 2,5", 40GB, 24 hours/7 days, 0..+60°C; for on-board mounting (hard disk mounting kit may be required additionally) 0713-0001 CompactPCI 1-slot 3U I/O midplane 0751-0006 CompactFlash card, 512MB, Type I, 0..+60°C 0751-0007 CompactFlash card, 512MB, Type I, -40..+85°C ® 5 Embedded Solutions F9 Data Sheet - 2004-10-06 Related Products 0751-0008 CompactFlash card, 64MB, Type I, 0..+60°C 0751-0009 CompactFlash card, 128MB, Type I, 0..+60°C 0751-0012 CompactFlash card, 256MB, Type I, 0..+60°C 0751-0013 Compact Flash card, 64MB, -40..+85°C 0751-0014 Compact Flash card, 128MB, -40..+85°C 0751-0018 CompactFlash card, 256MB, Type I, -40..+85°C 0752-0176 512 MB DDRAM 0..+60°C for 02F009-00 0752-0177 1 GB DDRAM 0..+60°C for 02F009-00 0752-0178 512 MB DDRAM 0..+60°C for 02F009-01 0752-0179 1 GB DDRAM 0..+60°C for 02F009-01 08F009R00 F9R, 1-slot 3U rear I/O transition module for F9 for 32-bit PCI systems; with primary IDE, USB ports 3 and 4, PS/2 keyboard/mouse, COM1 (TTL level); optional: VGA analog video and Gigabit Ethernet, 0..+60°C 08SA01-00 Serial interface adapter, RS232, not optically isolated, 0..+60°C 08SA02-00 Serial interface adapter, RS422/485, half duplex, optically isolated, 0..+60°C 08SA02-01 Serial interface adapter, RS422/485, full duplex, optically isolated, 0..+60°C 08SA02-07 Serial interface adapter, RS422/485, full duplex, optically isolated, temperature range: -40..+85°C 08SA03-00 Serial interface adapter, RS232, optically isolated, 0..+60°C 08SA03-01 Serial interface adapter, RS232, optically isolated, -40..+85°C 08SA04-00 Serial interface adapter, TTY, optically isolated, 0..+60°C For more functions realized with SA adapters, see the listing on MEN's website. You can also view our SA adapter compare chart for a quick overview of different functions. Please contact sales to make sure that these SA adapters can be used in the board configuration you are looking for. Software This MEN board is designed to work in a Microsoft Windows environment. For additional Windows driver packages provided or recommended by MEN please refer to the ordering numbers below. VxWorks software for this MEN board is available from WindRiver Systems. For VxWorks BSP and driver support provided by MEN please refer to the ordering numbers below. ® 6 Embedded Solutions F9 Data Sheet - 2004-10-06 Related Products This board is an MEN product running Linux. For Linux BSP and driver support provided by MEN please refer to the ordering numbers below. To use MDIS4 low-level drivers, you also need one of the MDIS4 system packages available for Windows, Linux, VxWorks, QNX, RTX or OS-9 (MDIS4 = MEN Driver Interface System). Documentation 20ABMX-00 Phoenix BIOS user manual 20APPN001 Application Note: Using MEN +5V CompactPCI Boards with +3.3V V(I/O) For the most up-to-date ordering information and direct links to other data sheets and downloads, see the F9 online data sheet under www.men.de. --> Click here! Germany France UK USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro LtdMEN Micro, Inc. Neuwieder Straße 5-718, rue René CassinWhitehall, 75 School LanePO Box 4160 90411 NurembergZA de la ChâtelaineHartford, NorthwichLago Vista, TX 78645-4160 Phone +49-911-99 33 5-074240 GaillardCheshire UK, CW8 1PFPhone (512) 267-8883 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Phone +44 (0) 1477-549-185Fax (512) 267-8803 E-mail info@men.deFax +33 (0) 450-955-211Fax +44 (0) 1477-549-178E-mail sales@menmicro.com www.men.deE-mail info@men-france.frE-mail info@menmicro.co.ukwww.menmicro.com www.men-france.frwww.menmicro.co.uk The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2004 MEN Mikro Elektronik GmbH. All rights reserved. ® 7 Embedded Solutions