D3c Data Sheet - 2004-11-02 D3c - 6U CompactPCI PowerPC SBC with PMCs u PowerPC MPC8245 with 603e core u 1-slot CompactPCI system slot u 512MB DRAM, CompactFlash u Graphics via PMC u Dual Fast Ethernet u 4 COMs, USB, IDE, keyboard/mouse u 2 PMC slots The D3 is a single-board computer for embedded In addition, the D3c CPU board can be equipped with applications based on the Kahlua II PowerPC. It can be PMC mezzanine cards. PMCs may particularly be used for used in a CompactPCI system slot or as a stand-alone intelligent telecom I/O. card.The modular combination of I/O functionality on a The D3 comes with the MPC8245 PowerPC with 300MHz single-board computer allows to build up tailored clock frequency and a local 32-bit/33-MHz PCI data control systems which appear as customized solutions bus. It is a complete state-of-the-art SBC offering based on standard components. DRAM, Flash and CompactFlash memory, dual Fast Depending on the kind of I/O requirements, further Ethernet, 4 COMs, USB, IDE and keyboard/mouse standard versions of D3 are availabe for other interfaces as well as an optional onboard hard disk.mezzanine standards. ® 1 Embedded Solutions D3c Data Sheet - 2004-11-02 Technical Data CPU • Compact PCI hot-swap support • PowerPC PXI · MPC8245 • Two trigger lines compliant with PXI Specification · 300MHz Mezzanine ExtensionsMemory • D3a: three PC-MIPs Type I/II on local PCI bus • Level 1 Cache integrated in MPC8245 · Compliant with PC-MIP specification • SO-DIMM slot for up to 512MB SDRAM • D3b: three M-Modules • 100MHz memory bus operation · Compliant with M-Module standard • Flash 2MB · Characteristics: D16, D32, A08, A24, INTA, INTC · 8-bit data bus • D3c: two PMCs • Serial EEPROM 2KB for factory settings · Compliant with PMC standard IEEE P1386 • CompactFlash (TM) card interface for Flash ATA (true IDE) via on-board IDE Miscellaneous • Serial real-time clock with integrated 56-byte NVRAMInterfaces • Serial hardware watchdog in supervisory circuit • Two 10/100Mbits/s Ethernet channels • Temperature sensor · Intel 82559ER • Hex switch for user settings · RJ45 at front panel with two LEDs • User LEDs (external) • One UART RS232 serial interface (COM1) · 16-byte send/receive buffer Electrical Specifications · RJ45 at front panel • Supply voltage/power consumption: • One UART (COM2) · +5V (4.85V..5.25V), 1.65 A typ. · 16-byte send/receive buffer · ±12V for mezzanines only, tbd. · Physical interface using SA adapter via 10-pin ribbon • MTBF: 63,000h @ 50°C cable on I/O connector · RS232..RS485, isolated or not: for free use in system (e. Mechanical Specifications g. cable to front) • Dimensions: standard double Eurocard, 233.3mm x 160mm • Two MPC8245 UARTs • Weight (without mezzanines and accessories): · Accessible via I/O connector · D3a: 318g • IDE port for hard disk drives · D3b: 315g · Drive can be connected via ribbon cable or mounted · D3c: 315g directly on the CPU board using MEN's adapter kit · Only one CompactPCI slot needed even with hard diskEnvironmental Specifications • Keyboard/mouse • Temperature range (operation): · PS/2 compatible · 0..+60°C or -40..+85°C · External adapters for line drivers required · Airflow: min. 10m³/h • USB port • Temperature range (storage): -40..+85°C · External line drivers • Relative humidity (operation): max. 95% non-condensing • Relative humidity (storage): max. 95% non-condensing Local PCI Bus • Altitude: -300m to + 3,000m • PCI Spec. 2.2 compliant • Shock: 15g/11ms • 32-bit data bus, 33MHz, 3.3V • Bump: 10g/16ms • Vibration (sinusoidal): 2g/10..150Hz CompactPCI Bus • CompactPCI system slot Safety · PICMG Spec. 2.0 R3.0 compliant • PCB manufactured with a flammability rating of 94V-0 by · 32-bit data bus UL recognized manufacturers · 33MHz • V(I/O): +3.3V or +5V (Universal Board) • Concurrent primary and secondary bus operation ® Embedded Solutions D3c Data Sheet - 2004-11-02 Technical Data EMC • Tested according to EN 55022 (radio disturbance), IEC1000-4-2 (ESD) and IEC1000-4-4 (burst) with regard to CE conformity Software Support • MENMON • Linux • VxWorks • QNX • OS-9 ® 3 Embedded Solutions D3c Data Sheet - 2004-11-02 Diagram ® 4 Embedded Solutions D3c Data Sheet - 2004-11-02 Related Products Standard Hardware 02D003A00 D3a, CompactPCI 6U, single-board computer, CPU MPC8245-300MHz, 2MB Flash, 3 PC-MIP slots, 0..+60°C 02D003A01 D3a, CompactPCI 6U, single-board computer, CPU MPC8245-300MHz, 2MB Flash, 3 PC-MIP slots, -40..+85°C 02D003B00 D3b, CompactPCI 6U, single-board computer, CPU MPC8245-300MHz, 2MB Flash, 3 M-Module slots, 0..+60°C 02D003B01 D3b, CompactPCI 6U, single-board computer, CPU MPC8245-300MHz, 2MB Flash, 3 M-Module slots, -40..+85°C 02D003C00 D3c, CompactPCI 6U, single-board computer, CPU MPC8245-300MHz, 2MB Flash, 2 PMC slots,0..+60°C 02D003C01 D3c, CompactPCI 6U, single-board computer, CPU MPC8245-300MHz, 2MB Flash, 2 PMC slots,-40..+85°C Please refer to our 6U CompactPCI compare chart for a selection of further single-board computers with different processors and on-board functionality. Systems & Card Cages Disk drives for basic systems are delivered as requested. Different rack sizes, power supplies and backplanes on request. 0701-0004 CompactPCI 19" 3U rack-mount enclosure, 5-slot 6U CompactPCI midplane, ATX power supply, fan, 2 batteries; obsolete as of October 13, 2004 0701-0010 CompactPCI 19" 7U/84HP rack-mount enclosure for 6U cards vertical, 8-slot 6U CompactPCI backplane, system slot left, prepared for rear I/O, space for hard-disk drive, floppy drive, CD-ROM drive, 300W ATX power supply, incl. 1U fan tray Accessories 05AD67-00 IDE mounting kit 44-pin to 44-pin; 50.8 mm; installation kit for Kahlua Box or A12, D3, A15 with AD67, temperature range: -40..+85°C 05A012-00 Hard disk 2.5", 9.5mm adapter for A12, D3, SC13 05A012-01 Mounting kit for 2 SA adapters for A12/A15/D3, incl. 6U 1-slot VME or CompactPCI front panel incl. ribbon cable, without SA adapters 05F006-00 RS232 interface cable 9-pin D-Sub plug to 8-pin RJ45 plug, 2m 05M000-17 25 mounting screw sets to fix M-Modules on carrier boards ® 5 Embedded Solutions D3c Data Sheet - 2004-11-02 Related Products You can download the data sheet for hard disk 0710-0012 from MEN's website. 0710-0009 IDE hard disk 2.5", 9.5mm, 20GB; for mounting on-board (harddisk mounting kit may be additionally required) 0710-0012 Industrial IDE hard disk 2,5", 40GB, 24 hours/7 days, 0..+60°C; for on-board mounting (hard disk mounting kit may be required additionally) 0751-0006 CompactFlash card, 512MB, Type I, 0..+60°C 0751-0007 CompactFlash card, 512MB, Type I, -40..+85°C 0751-0008 CompactFlash card, 64MB, Type I, 0..+60°C 0751-0009 CompactFlash card, 128MB, Type I, 0..+60°C 0751-0012 CompactFlash card, 256MB, Type I, 0..+60°C 0751-0013 Compact Flash card, 64MB, -40..+85°C 0751-0014 Compact Flash card, 128MB, -40..+85°C 0751-0018 CompactFlash card, 256MB, Type I, -40..+85°C 0752-0048 64MB DRAM 0..+60°C for 02D003x00 0752-0049 128MB DRAM 0..+60°C for 02D003x00 0752-0050 256MB DRAM 0..+60°C for 02D003x00 0752-0051 512MB DRAM 0..+60°C for 02D003x00 0752-0132 512MB DRAM -40..+85°C for 02D003x01 08AD67-01 I/O extension 19" 6U 4HP incl. 1 USB connector, 1 keyboard connector, 1 mouse connector; prepared for 3 SA adapters, prepared for HDD 2.5", reset, abort, 0..+60°C 08SA01-00 Serial interface adapter, RS232, not optically isolated, 0..+60°C 08SA02-00 Serial interface adapter, RS422/485, half duplex, optically isolated, 0..+60°C 08SA02-01 Serial interface adapter, RS422/485, full duplex, optically isolated, 0..+60°C 08SA02-07 Serial interface adapter, RS422/485, full duplex, optically isolated, temperature range: -40..+85°C 08SA03-00 Serial interface adapter, RS232, optically isolated, 0..+60°C 08SA03-01 Serial interface adapter, RS232, optically isolated, -40..+85°C 08SA04-00 Serial interface adapter, TTY, optically isolated, 0..+60°C For more functions realized with SA adapters, see the listing on MEN's website. You can also view our SA adapter compare chart for a quick overview of different functions. Please contact sales to make sure that these SA adapters can be used in the board configuration you are looking for. Software ® 6 Embedded Solutions D3c Data Sheet - 2004-11-02 Related Products 10ABMX-20 ELinOS V.3.0 - Embedded Linux incl. RTAI real-time extension for PowerPC, English version. The Sysgo Development Kit includes the board support packages (BSPs) for MEN cards F1N, B11, A12, A15, D3, SC13, F6, EM04/N and PP01. The package includes 1 year ELinOS development support and all ELinOS updates and upgrades during this period for free. It additionally includes the BSP support for MEN hardware by MEN. --- N.B.: For correct handling of the ELinOS software suppvort it is mandatory to sign and return the enclosed support agreement directly to Sysgo! The Sysgo support agreement is automatically prolonged for another year if not cancelled 3 months prior to expiration. 10ABMX-21 ELinOS V.3.0 - Embedded Linux incl. RTAI real-time extension for PowerPC, German version. The Sysgo Development Kit includes the board support packages (BSPs) for MEN cards F1N, B11, A12, D3, SC13, F6, EM04/N and PP01. The package includes 1 year ELinOS development support and all ELinOS updates and upgrades during this period for free. It additionally includes the BSP support for MEN hardware by MEN. --- N.B.: For correct handling of the ELinOS software support it is mandatory to sign and return the enclosed support agreement directly to Sysgo! The Sysgo support agreement is automatically prolonged for another year if not cancelled 3 months prior to expiration. 10F001N01 OS-9(000) V.2.2/3.x: BSP for F1N, B11, A12, D3, SC13, Kahlua Box (object code, MEN) 10F001N02 OS-9(000) V4.2: BSP for F1N, B11, A12, A15, D3, SC13, Kahlua Box (object code, MEN) 10F001N40 QNX 6 BSP for F1N, B11, A12, A15, D3, SC13, Kahlua Box (object code, MEN) 10F001N60 VxWorks V.5.4..5.5 / Tornado 2.0..2.2 BSP for F1N, B11, A12, D3, SC13, Kahlua Box, A15 This board is an MEN product running Sysgo's ELinOS Embedded Linux. Sysgo provides full support for MEN hardware. Please contact www.sysgo.de. QNX software for this MEN board is available from QNX (www.qnx.com). For QNX BSP and driver support provided by MEN please refer to the ordering numbers below. VxWorks software for this MEN board is available from WindRiver Systems. For VxWorks BSP and driver support provided by MEN please refer to the ordering numbers below. For OS-9 BSP and driver support provided by MEN please refer to the ordering numbers below. XiBase9, a graphical user interface for Linux and OS-9 from XiSys, is running on the MEN graphics controller PC-MIP and PMC modules P1, P17 and P517 in combination with the PowerPC-based Single-Board Computers A11, A12, D3, F1N, B11 and SC13 (further SBCs on request). For more information, purchase and support please apply to www.xisys.de. ® 7 Embedded Solutions D3c Data Sheet - 2004-11-02 Related Products 14A012-00 MENMON (Firmware) for A12, D3, SC13 (object code) You can download the data sheet for the MENMON firmware for PowerPC platforms from MEN's website. Documentation 20D003-00 D3 user manual 21APPN003 Application Note: Using P1/P501 Graphics on MEN 824x/ALI boards under ELinOS For the most up-to-date ordering information and direct links to other data sheets and downloads, see the D3c online data sheet under www.men.de. --> Click here! Germany France UK USA MEN Mikro Elektronik GmbHMEN Mikro Elektronik SAMEN Micro LtdMEN Micro, Inc. Neuwieder Straße 5-718, rue René CassinWhitehall, 75 School LanePO Box 4160 90411 NurembergZA de la ChâtelaineHartford, NorthwichLago Vista, TX 78645-4160 Phone +49-911-99 33 5-074240 GaillardCheshire UK, CW8 1PFPhone (512) 267-8883 Fax +49-911-99 33 5-901Phone +33 (0) 450-955-312Phone +44 (0) 1477-549-185Fax (512) 267-8803 E-mail info@men.deFax +33 (0) 450-955-211Fax +44 (0) 1477-549-178E-mail sales@menmicro.com www.men.deE-mail info@men-france.frE-mail info@menmicro.co.ukwww.menmicro.com www.men-france.frwww.menmicro.co.uk The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue. All brand or product names are trademarks or registered trademarks of their respective holders. Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of the application or use of the products described in this document. The products of MEN Mikro Elektronik are not suited for use in nuclear reactors and for application in medical appliances used for therapeutical purposes. Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik has consequently adapted and released the product. Copyright © 2004 MEN Mikro Elektronik GmbH. All rights reserved. ® 8 Embedded Solutions