MEAN WELL USP-350-15
Specifications
AC CURRENT (Typ.)
4A/115VAC 2A/230VAC
CURRENT RANGE
0 ~ 20A
DC VOLTAGE
15V
DIMENSION
235.2*101.5*38mm (L*W*H)
EFFICIENCY (Typ.)
88%
FREQUENCY RANGE
47 ~ 63Hz
HOLD UP TIME (Typ.)
16ms/230VAC 16ms/115VAC at full load
INRUSH CURRENT (Typ.)
22A/115VAC 44A/230VAC
LINE REGULATION
0.5%
LOAD REGULATION
1.0%
OVER LOAD
105 ~ 130% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE
17 ~ 21V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
POWER FACTOR (Typ.)
0.95/230VAC 0.98/115VAC at full load
RATED CURRENT
23.4A
RATED POWER
300W
RIPPLE & NOISE (max.)
100mVp-p
SETUP, RISE TIME
2000ms, 100ms/230VAC 4000ms, 100ms/115VAC at full load
VOLTAGE ADJ. RANGE
13.5 ~ 16.5V
VOLTAGE RANGE
90 ~ 264VAC 127 ~ 370VDC
VOLTAGE TOLERANCE
2.0%
Features
- Active AC surge current limiting
- Built in active PFC circuit compliance to EN61000-3-2
- Free air convection for 300W and 350W with 23.5CFM forced air
- High power density 6.3w/in
- Protections: Short circuit / Overload / Over voltage / Over temperature
- U-bracket low profile:38mm
- Universal AC input / Full range
- ZVS technology to reduce power dissipation
Datasheet
Extracted Text
350W Single Output with PFC Function USP-350 series Features : Universal AC input / Full range Built in active PFC circuit compliance to EN61000-3-2 Protections: Short circuit / Overload / Over voltage / Over temperature Free air convection for 300W and 350W with 23.5CFM forced air 3 High power density 6.3w/in ZVS technology to reduce power dissipation Active AC surge current limiting U-bracket low profile:38mm 3 years warranty SPECIFICATION MODEL USP-350-3.3 USP-350-5 USP-350-12 USP-350-15 USP-350-24 USP-350-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 70A 70A 29.2A 23.4A 14.6A 7.3A CURRENT RANGE (convection) 0 ~ 50A 0 ~ 50A 0 ~ 25A 0 ~ 20A 0 ~ 12.5A 0 ~ 6.25A CURRENT RANGE (23.5CFM FAN) 0 ~ 70A 0 ~ 70A 0 ~ 29.2A 0 ~ 23.4A 0 ~ 14.6A 0 ~ 7.3A RATED POWER (convection) 165W 250W 300W 300W 300W 300W RATED POWER (23.5CFM FAN) 231W 350W 350.4W 351W 350.4W 350.4W OUTPUT RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p VOLTAGE ADJ. RANGE 2.97 ~ 3.6V 4.5 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V 43.2 ~ 52.8V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 2000ms, 100ms/230VAC 4000ms, 100ms/115VAC at full load HOLD UP TIME (Typ.) 12ms/230VAC 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) 0.94/230VAC 0.95/230VAC 0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 78% 84% 88% 88% 88% 89% 4A/115VAC 2A/230VAC AC CURRENT (Typ.) 22A/115VAC 44A/230VAC INRUSH CURRENT (Typ.) LEAKAGE CURRENT <2mA / 240VAC 105 ~ 120% rated output power 105 ~ 130% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.7 ~ 4.6V 5.7 ~ 7V 13.5 ~ 16.3V 17 ~ 21V 26.7 ~ 32.4V 53 ~ 64.8V OVER VOLTAGE PROTECTION Protection type : Hiccup mode, recovers automatically after fault condition is removed 80 5 (TSW1) detect on heatsink of power transistor 80 5 (TSW2 ) detect on heatsink of power diode OVER TEMPERATURE Protection type : Shut down o/p voltage with auto-recovery -10 ~ +65 (Refer to output load derating curve) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 45 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes VIBRATION SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B (Note 4) HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, light industry level, criteria A MTBF 106.3K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 235.2*101.5*38mm (L*W*H) 1.1Kg; 16pcs/18Kg/0.72CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:USP-350-SPEC 2010-10-18 350W Single Output with PFC Function USP-350 series Mechanical Specification Case No. 941A-D Unit:mm FAN 23.5CFM Air flow 4.85 38 direction 1 CN4 2 1 2 3 4 5 CN2 6 7 8 9 10 11 12 13 14 CN3 15 CN1 16 1 17 2 5-M3 L=2 18 3 FS1 4 LED1 5 54.6 81 24.5 4.85 235.2 DC Output Connector (CN2,CN3) : JST B9P-VH*2 or equivalent AC Input Connector (CN1) : JST B5P-VH or equivalent Pin No. Assignment Mating Housing Terminal Pin No. Assignment Mating Housing Terminal 1~9 -V JST VHR JST SVH-21T-P1.1 1 FG or equivalent or equivalent 10~18 +V 2,4 No Pin JST VHR JST SVH-21T-P1.1 Remote Sense(CN4) : Molex 5045-02 or equivalent 3 AC/N or equivalent or equivalent Pin No. Assignment Mating Housing Terminal 5 AC/L 1 RS+ Molex 5051 Molex 4809 or equivalent or equivalent 2 RS- Block Diagram fosc : 100KHz +S ACTIVE RECTIFIERS RECTIFIERS POWER +V EMI INRUSH & I/P & CURRENT SWITCHING FILTER -V P.F.C. FILTER LIMITING -S O.T.P. FG DETECTION CIRCUIT PWM O.L.P. CONTROL O.V.P. O.C.P. Derating Curve Static Characteristics (5V) Ta=25 100 100 90 Others 80 80 70 60 3.3V,5V 50 60 40 50 20 40 -10 0 10 20 30 40 45 50 60 65 70 (HORIZONTAL) 90 100 110 135 155 230 260 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:USP-350-SPEC 2010-10-18 LOAD (%) 101.5 28 33.5 17.38 12 50mm LOAD(%) 12
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the USP-350-15 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Mean Well ES18U09-P1J Power Supply 18W; 9.0V@2.00A; 2.1*5.5*11/C+/6F1185 (79x54x33 mm) Wallmount Enc...
Mean Well ES25B48-P1J Power Supply - 25W; 48V@0.52A; 2.1*5.5*11/C+/6F1185 (79 x 54 x 33mm) Desktop E...
Manufacturers






What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods