D-120B - MEAN WELL - Elite.Parts

Description

Mean Well D-120B Power Supply. 120W | +5V6A +24V4A (199x110x50 mm) | Dual Output

Part Number

D-120B

Price

Request Quote

Manufacturer

MEAN WELL

Lead Time

Request Quote

Category

POWER SUPPLY

Specifications

AC CURRENT (Typ.)

2.2A/115VAC | 1.3A/230VAC

AC Current(Typ)

2.2A/115VAC; 1.3A/230VAC

Current Range

2 ~12A | 0.5 ~ 5A

DC VOLTAGE

5V | 12V

Dimension

199*110*50mm (L*W*H)
199*110*50mm(L*W*H)

EFFICIENCY (Typ.)

78%

Efficiency(Typ)

80%

EMC Emission

Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3

EMC Immunity

Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
Compliance to EN610000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A

FREQUENCY RANGE

47 ~ 63Hz

HOLD UP TIME (Typ.)

24ms at full load

Hold Up Time(Typ)

24ms at full load

Humidity

Operating:20 ~ 90% RH non-condensing; Storage:10 ~ 95% RH

Input Frequency Range

47 ~ 63Hz

Input Voltage Range

88 ~ 132VAC/176 ~ 264VAC selected by switch; 248 ~ 370VDC

INRUSH CURRENT (Typ.)

COLD START 32A

Inrush Current(Typ)

COLD START 32A

Isolation resistance

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C / 70% RH

Line Regulation

±0.5% | ±1.0%

Load Regulation

±0.5% | ±5.0%

MTBF

272.8K hrs min. | MIL-HDBK-217F(25°C)
272.8K hrs min.; MIL-HDBK-217F (25°C)

Output Number

CH1 | CH2

OVER VOLTAGE

CH1:5.75 ~ 6.75VDC | Protection type: Shut down o/p voltage, re-power on to recover

OVERLOAD

105 ~ 135% rated output power | Protection type: Shut down o/p voltage, re-power on to recover

Overload Protection

105 ~ 135% rated output power; Protection type : Shut down o/p voltage, re-power on to recover

Overload Voltage

CH1:5.75 ~ 6.75VDC; Protection type : Shut down o/p voltage, re-power on to recover

Packing

0.82Kg; 16pcs/14.2Kg/0.95CUFT

Rated Current

12A | 5A

Rated Power

120W

RIPPLE & NOISE (max.)

60mVp-p | 120mVp-p

Safety standards

UL60950-1, TUV EN60950-1, CCC GB4943 approved

SETUP, RISE TIME

200ms, 50 ms at full load
200ms, 50ms at full load

Storage temp., humidity

-20 ~ +85°C, 10 ~ 95% RH

Temp. Coefficient

±0.03%°C (0~50°C) on +5V output

Temperature

Operating:-10 ~ +60°C(Refer to "Derating Curve"); Storage:-20 ~ +85°C

Temperature Coefficient

0.03%/°C (0~50°C) on +5V output

Vibratio

10 ~ 500HZ, 2G 10 min./1 cycle, 60 min. each along X, Y, Z axes

Vibration

10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes

VOLTAGE ADJ. RANGE

CH1: 4.75 ~ 5.5V

VOLTAGE RANGE

88 ~ 132VAC/176 ~ 264VAC selected by switch | 248 ~ 370VDC

VOLTAGE TOLERANCE

±2.0% | ±6.0%

WITHSTAND VOLTAGE

I/P-O/P:3KVAC | I/P-FG:1.5KVAC | O/P-FG:0.5KVAC
I/P-O/P:3KVAC; I/P-FG:1.5KVAC; O/P-FG:0.5KVAC

Working Humidity

20 ~ 90% RH non-condensing

Working temp.

-10 ~ +60°C

Features

100% full load burn-in test
AC input range selected by switch
Cooling by free air convection
Fixed switching frequency at 28KHz
Protections: Short circuit / Overload / Over voltage

Datasheet

Meanwell=D-120B=datasheet-7272061211.pdf

455 KiB

Download

Extracted Text

120W Dual Output Switching Power Supply D-120 series Features : AC input range selected by switch Protections: Short circuit / Overload / Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 28KHz 2 years warranty SPECIFICATION MODEL D-120A D-120B OUTPUT NUMBER CH1 CH2 CH1 CH2 DC VOLTAGE 5V 12V 5V 24V RATED CURRENT 12A 5A 6A 4A CURRENT RANGE 2 ~ 12A 0.5 ~ 5A 2 ~ 10A 0.4 ~ 4A RATED POWER 120W 126W RIPPLE & NOISE (max.) Note.2 60mVp-p 120mVp-p 60mVp-p 150mVp-p OUTPUT VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% 6.0% 2.0% 7.0% LINE REGULATION 0.5% 1.0% 0.5% 1.0% LOAD REGULATION 0.5% 5.0% 0.5% 6.0% SETUP, RISE TIME 200ms, 50ms at full load HOLD UP TIME (Typ.) 24ms at full load VOLTAGE RANGE 88 ~ 132VAC/176 ~ 264VAC selected by switch 248 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 78% 80% INPUT AC CURRENT (Typ.) 2.2A/115VAC 1.3A/230VAC INRUSH CURRENT (Typ.) COLD START 32A LEAKAGE CURRENT <3.5mA / 240VAC 105 ~ 135% rated output power OVERLOAD Protection type : Shut down o/p voltage, re-power on to recover PROTECTION CH1:5.75 ~ 6.75VDC OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0~50 ) on +5V output VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1, CCC GB4943 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 272.8K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 199*110*50mm (L*W*H) 0.82Kg; 16pcs/14.2Kg/0.95CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) File Name:D-120-SPEC 2011-06-17 3-M3 120W Dual Output Switching Power Supply D-120 series Mechanical Specification Case No. 906 Unit:mm 192 5 172 100 1 2 3 4 5 6 5-M3 7 8 199 6 190.5 Terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment 1 AC/L 4 DC OUTPUT +V2 2 AC/N 5,6 DC OUTPUT COM 3 7,8 DC OUTPUT +V1 FG 20 159 Block Diagram fosc : 28KHz RECTIFIERS 230 & +V2 115 FILTER RECTIFIERS RECTIFIERS POWER EMI +V1 I/P & & FILTER SWITCHING COM FILTER FILTER O.L.P. O.V.P. FG PWM DRIVER CONTROL Derating Curve Static Characteristics(B) 25 5.2 300 100 +24V 250 24 5.0 +5V 80 23 4.8 200 22 4.6 150 60 +24V 100 21 4.4 40 20 4.2 50 20 +5V 25 19 4.0 -10 0 10 20 30 40 50 60 (VERTICAL) 60 85 90 95 100 105 110 115 120 125 132 -10 0 45 55 (HORIZONTAL) 120 170 180 190 200 210 220 230 240 250 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:D-120-SPEC 2011-06-17 3.5 110 LOAD (%) 50 8.2 9.5 12 16.5 24.5 37 OUTPUT VOLTAGE (V) 12 25 3.5 3.5 97 6.5 6 20 OUTPUT RIPPLE (mVp-p)

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products