Name: MEAN WELL TP-75C
Brand: MEAN WELL
SKU: TP-75C

Description

Mean Well TP-75C Power Supplies-75W, 5V 15V -15V Triple Output with PFC Function

Part Number

TP-75C

Price

Request Quote

Manufacturer

MEAN WELL

Lead Time

Request Quote

Category

POWER SUPPLY

Specifications

AC CURRENT (Typ.)

1.5A/115VAC 0.8A/230VAC

CURRENT RANGE

1.5 ~ 10A 0.2 ~ 3A 0 ~ 0.6A

DC VOLTAGE

5V 15V -15V

DIMENSION

179*99*33mm (L*W*H)

EFFICIENCY (Typ.)

70%

FREQUENCY RANGE

47 ~ 63Hz

HOLD UP TIME (Typ.)

36ms at full load

INRUSH CURRENT (Typ.)

COLD START 20A/230VAC

LINE REGULATION

1.0% 1.0% 1.0%

LOAD REGULATION

3.0% 4.0% 8.0%

OVER LOAD

105 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed

OVER VOLTAGE

5.75 ~ 6.75V on +5V
Protection type : Shut down o/p voltage, re-power on to recover

POWER FACTOR (Typ.)

PF>0.95/230VAC PF>0.98/115VAC at full load

RATED CURRENT

6A 2.5A 0.5A

RATED POWER

75W

RIPPLE & NOISE (max.)

100mVp-p 120mVp-p 120mVp-p

SETUP, RISE TIME

800ms, 60ms at full load

VOLTAGE ADJ. RANGE

CH1: 4.75 ~ 5.5V

VOLTAGE RANGE

90 ~ 264VAC 127 ~ 370VDC

VOLTAGE TOLERANCE

3.0% 4.0% 8.0%

Features

Built-in active PFC function, PF>0.95
Cooling by free air convection
Fixed switching frequency at PFC:67KHz PWM:134KHz
LED indicator for power on
Low profile: 33mm thickness
Protections: Short circuit / Overload / Over voltage
Universal AC input / Full range

Datasheet

MeanWell-TP75series-d-1148234108s.pdf

602 KiB

Download

Extracted Text

75W Triple Output with PFC Function TP-75 series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections: Short circuit / Overload / Over voltage Low profile: 33mm thickness LED indicator for power on Cooling by free air convection Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty SPECIFICATION MODEL TP-75A TP-75B TP-75C OUTPUT NUMBER CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 DC VOLTAGE 5V 12V -5V 5V 12V -12V 5V 15V -15V RATED CURRENT 7A 3A 0.6A 7A 3A 0.4A 6A 2.5A 0.5A CURRENT RANGE 1.5 ~ 10A 0.2 ~ 4A 0 ~ 0.6A 1.5 ~ 10A 0.2 ~ 4A 0 ~ 0.6A 1.5 ~ 10A 0.2 ~ 3A 0 ~ 0.6A RATED POWER 74W 75.8W 75W RIPPLE & NOISE (max.) Note.2 100mVp-p 120mVp-p 100mVp-p 100mVp-p 120mVp-p 120mVp-p 100mVp-p 120mVp-p 120mVp-p OUTPUT VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 3.0% 4.0% 8.0% 3.0% 4.0% 8.0% 3.0% 4.0% 8.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 3.0% 4.0% 8.0% 3.0% 4.0% 8.0% 3.0% 4.0% 8.0% SETUP, RISE TIME 800ms, 60ms at full load HOLD UP TIME (Typ.) 36ms at full load VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC PF>0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 70% AC CURRENT (Typ.) 1.5A/115VAC 0.8A/230VAC INRUSH CURRENT (Typ.) COLD START 20A/230VAC LEAKAGE CURRENT <2mA / 240VAC 105 ~ 150% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 5.75 ~ 6.75V on +5V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to "Derating Curve") WORKING TEMP. WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT -20 ~ +85 , 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50 VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1min. SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 198.4K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 179*99*33mm (L*W*H) 0.65Kg; 20pcs/12.7Kg/0.64CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:TP-75-SPEC 2012-02-21 75W Triple Output with PFC Function TP-75 series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections: Short circuit / Overload/ Over voltage Low profile: 33mm thickness LED indicator for power on Cooling by free air convection Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty SPECIFICATION MODEL TP-75D TP-7503 OUTPUT NUMBER CH1 CH2 CH3 CH1 CH2 CH3 DC VOLTAGE 5V 24V 12V 5V 3.3V 12V RATED CURRENT 7A 1.5A 0.4A 9A 8A 0.3A CURRENT RANGE 1.5 ~ 10A 0.2 ~ 2.5A 0 ~ 0.6A 1.5 ~ 10A 0.2 ~ 8A 0 ~ 0.6A RATED POWER 75.8W 75W RIPPLE & NOISE (max.) Note.2 100mVp-p 120mVp-p 120mVp-p 100mVp-p 50mVp-p 120mVp-p OUTPUT VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 3.0% 4.0% 8.0% 3.0% 4.0% 8.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 3.0% 4.0% 8.0% 3.0% 4.0% 8.0% SETUP, RISE TIME 800ms, 60ms at full load HOLD UP TIME (Typ.) 36ms at full load VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC PF>0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 70% AC CURRENT (Typ.) 1.5A/115VAC 0.8A/230VAC INRUSH CURRENT (Typ.) COLD START 20A/230VAC LEAKAGE CURRENT <2mA / 240VAC 105 ~ 150% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 5.75 ~ 6.75V on +5V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to "Derating Curve") WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1min. SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 198.4K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 179*99*33mm (L*W*H) 0.65Kg; 20pcs/12.7Kg/0.64CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:TP-75-SPEC 2012-02-21 75W Triple Output with PFC Function TP-75 series Mechanical Specification Case No. 920A Unit:mm 60 65 LED +ADJ. 1 2 3 4 5 5 6 2-M4 L=4mm 7 8 15 Terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment 9 max. 1 DC OUTPUT +V2 6 FG 2,3 COM 7 AC/N 4 DC OUTPUT +V1 8 AC/L 5 DC OUTPUT +V3 25 117 6-M4 L=6mm 179 Block Diagram PFC fosc : 67KHz PWM fosc : 134KHz EMI FILTER RECTIFIERS PFC POWER +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER CONSTANT CURRENT LIMITING & FG DETECTION O.L.P. PWM & PFC CIRCUIT CONTROL O.V.P. Derating Curve Output Derating VS Input Voltage With 18CFM 100 100 Forced AIR 90 (15cm) 80 80 70 60 Convection 60 40 50 20 40 -10 0 10 20 30 40 50 60 70 (HORIZONTAL) 85 100 115 125 155 230 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:TP-75-SPEC 2012-02-21 LOAD (%) 33 7.62 6.15 16 18 8 49.5 LOAD (%) 99 17 32.5 119

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

MEAN WELL TP-75C

Why buy from GID?

What they say about us

Related Products