MEAN WELL SP-750-5
Specifications
AC CURRENT (Typ.)
8.8A/115VAC 4.2A/230VAC
CURRENT RANGE
0 ~ 120A
DC VOLTAGE
5V
DIMENSION
278*127*63.5mm (L*W*H)
EFFICIENCY (Typ.)
80%
FREQUENCY RANGE
47 ~ 63Hz
HOLD UP TIME (Typ.)
16ms/230VAC 16ms/115VAC at full load
INRUSH CURRENT (Typ.)
27A/115VAC 45A/230VAC
LINE REGULATION
0.5%
LOAD REGULATION
2.0%
OVER LOAD
105 ~ 125% rated output power
Protection type : Constant current limiting, unit will Hiccup after 3 sec.
OVER VOLTAGE
5.75 ~ 6.75V
Protection type : Shut down o/p voltage, re-power on to recover
POWER FACTOR (Typ.)
PF>0.96/230VAC PF>0.99/115VAC at full load
RATED CURRENT
120A
RATED POWER
600W
REMOTE CONTROL(OPTION)
RC+/RC- short power on, open power off
RIPPLE & NOISE (max.)
120mVp-p
SETUP, RISE TIME
1500ms, 50ms/230VAC 1500ms, 50ms/115VAC at full load
VOLTAGE ADJ. RANGE
4.75 ~ 5.5V
VOLTAGE RANGE
90 ~ 264VAC 127 ~ 370VDC
VOLTAGE TOLERANCE
2.0%
Features
- AC input active surge current limiting
- Built-in active PFC function,PF>0.96
- Built-in constant current limiting circuit
- Built-in remote ON-OFF control
- Built-in remote sense function
- Forced air cooling by built-in DC ball bearing fan
- High power density 5.48/inch
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Universal AC input / Full range
- With power good and fail signal output
Datasheet
Extracted Text
750W Single Output Power Supply SP-750 series Features : Universal AC input / Full range AC input active surge current limiting Built-in active PFC function,PF>0.96 Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC ball bearing fan 3 High power density 5.48/inch Built-in constant current limiting circuit With power good and fail signal output Built-in remote ON-OFF control Built-in remote sense function 3 years warranty SPECIFICATION MODEL SP-750-5 SP-750-12 SP-750-15 SP-750-24 SP-750-27 SP-750-48 DC VOLTAGE 5V 12V 15V 24V 27V 48V RATED CURRENT 120A 62.5A 50A 31.3A 27.8A 15.7A CURRENT RANGE 0 ~ 120A 0 ~ 62.5A 0 ~ 50A 0 ~ 31.3A 0 ~ 27.8A 0 ~ 15.7A RATED POWER 600W 750W 750W 751.2W 750.6W 753.6W RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p OUTPUT VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 10 ~ 13.5V 13.5 ~ 16.5V 22 ~ 26.4V 24 ~ 30V 43 ~ 56V VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.3% 0.3% 0.2% 0.2% 0.2% LOAD REGULATION 2.0% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 1500ms, 50ms/230VAC 1500ms, 50ms/115VAC at full load HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.96/230VAC PF>0.99/115VAC at full load INPUT EFFICIENCY (Typ.) 80% 85% 87% 89% 89% 90% AC CURRENT (Typ.) 8.8A/115VAC 4.2A/230VAC INRUSH CURRENT (Typ.) 27A/115VAC 45A/230VAC LEAKAGE CURRENT <2.0mA / 240VAC 105 ~ 125% rated output power OVERLOAD Protection type : Constant current limiting, unit will Hiccup after 3 sec. 5.75 ~ 6.75V 13.8 ~ 16.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 85 5 (TSW1 ) detect on heatsink of power transistor 85 5 (TSW2 ) detect on heatsink of power diode OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down POWER GOOD/FAIL 50ms/1ms FUNCTION REMOTE CONTROL Note.5 RC+/RC- short power on, open power off -20 ~ +60 (Refer to "Derating Curve") WORKING TEMP. 20~90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.05%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved SAFETY & WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH (Note 4) EMC EMISSION Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A MTBF 124K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 278*127*63.5mm (L*W*H) 2.9Kg; 6pcs / 18.4Kg / 0.98CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. The power supply unit will have no output if the shorting connector is not assembled between RC+ & RC-. File Name:SP-750-SPEC 2011-08-23 750W Single Output Power Supply SP-750 series Mechanical Specification Case No.919A Unit:mm 113 7 220 16 4-M3 6-M3 L=6 4-M3 Air flow O/P direction 1 I/P 1 33 72 2 2 5 1 3 6 2 7 3 8 4 5 240 CONTROL 24.5 251 278 19 max. 20 max. 4-M3 28 max. 2-M6 220 15 BOTTOM VIEW TOP VIEW AC Input Terminal DC Output Terminal Control Pin No. Assignment : MOLEX 5559-NP uses 5558male crimp terminal Pin No. Assignment Pin No. Assignment Pin No. Assignment Pin No. Assignment Pin No. Assignment Mating connector Terminal Pin No. Assignment 1 AC/L 1 DC OUTPUT +V 1 NC 5 NC MOLEX 5556 2 AC/N 2 -S 6 PF(Power fail signal) 2 DC OUTPUT -V Female crimp MOLEX 5557-NR Terminal 3 FG G +S 3 7 receptacle RC- RC+ 4 8 Block Diagram PFC fosc : 100KHz PWM fosc : 140KHz +S ACTIVE PFC PWM RECTIFIERS +V EMI INRUSH I/P RECTIFIERS POWER POWER & CURRENT FILTER -V SWITCHING SWITCHING FILTER LIMITING -S CURRENT O.T.P. DETECTION LIMIT CIRCUIT O.L.P. DETECTION PFC PWM CIRCUIT PF CONTROL CONTROL O.V.P. O.T.P. REMOTE RC CONTROL AUX FAN FAN LOCK POWER PROTECTION File Name:SP-750-SPEC 2011-08-23 127 7 10 113 7 20 30 34.5 20 63.5 +V ADJ. 40.5 39 91 149 5 11 750W Single Output Power Supply SP-750 series Derating Curve Static Characteristics 100 100 90 80 85 60 70 60 40 50 20 40 -20 0 10 20 30 40 50 60 70 (HORIZONTAL) 90 95 100 115 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz Control Terminal Instruction Manual Remote Sensing Power Fail Signal PF Signal is the voltage difference between "G" and "PF" pin output G PF RC+ +S PF NC RC+ +S PF NC RC- G -S NC RC- G -S NC -V +V -V +V LOAD LOAD - -S - + + +S Remote Control Power ON: RC+/RC- Short Power OFF: RC+/RC- open RC- RC+ RC+ +S PF NC RC- G -S NC -V +V LOAD - + File Name:SP-750-SPEC 2011-08-23 LOAD (%) LOAD (%)
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SP-750-5 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Mean Well ES18U09-P1J Power Supply 18W; 9.0V@2.00A; 2.1*5.5*11/C+/6F1185 (79x54x33 mm) Wallmount Enc...
Mean Well ES25B48-P1J Power Supply - 25W; 48V@0.52A; 2.1*5.5*11/C+/6F1185 (79 x 54 x 33mm) Desktop E...
Manufacturers






What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods