MEAN WELL SP-480-24
Specifications
AC CURRENT (Typ.)
6.5A/115VAC 3.5A/230VAC
CURRENT RANGE
0 ~ 22A
DC VOLTAGE
24V
DIMENSION
278*127*43mm (L*W*H)
EFFICIENCY (Typ.)
87%
FREQUENCY RANGE
47 ~ 63Hz
HOLD UP TIME (Typ.)
18ms/230VAC 18ms/115VAC at full load
INRUSH CURRENT (Typ.)
20A/115VAC 40A/230VAC
LINE REGULATION
0.2%
LOAD REGULATION
0.5%
OVER LOAD
23.1 ~ 29.7A
Protection type : Constant current limiting, recovers automatically after conditions is removed
OVER VOLTAGE
28.8 ~ 33.6V
Protection type : Shut down o/p voltage, re-power on to recover
PEAK LOAD(10 min.)
528W
POWER FACTOR (Typ.)
PF>0.95/230VAC PF>0.98/115VAC at full load
RATED CURRENT
20A
RATED POWER
480W
REMOTE CONTROL(OPTION)
RC+/RC-: 0 ~ 0.8V
RIPPLE & NOISE (max.)
150mVp-p
SETUP, RISE TIME
1000ms, 80ms/230VAC 2500ms, 80ms/115VAC at full load
VOLTAGE ADJ. RANGE
22 ~ 27.6V
VOLTAGE RANGE
85 ~ 264VAC 120 ~ 370VDC
VOLTAGE TOLERANCE
1.0%
Features
- Active AC surge current limiting
- Built in active PFC function, PF>0.95
- Built-in remote ON-OFF control
- Built-in remote sense function
- Forced air cooling by built-in DC fan
- High power density 5.18w/in
- Low profile:43mm thickness
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Universal AC input / Full range
Datasheet
Extracted Text
480W Single Output with PFC Function S P -480 s e r i e s Features : Universal AC input / Full range Built in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage/Over temperature Forced air cooling by built-in DC fan 3 High power density 5.18w/in Low profile:43mm thickness Built-in remote ON-OFF control Built-in remote sense function Active AC surge current limiting 3 years warranty SPECIFICATION MODEL SP-480-3.3 SP-480-5 SP-480-12 SP-480-15 SP-480-24 SP-480-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 85A 85A 40A 32A 20A 10A CURRENT RANGE 0 ~ 85A 0 ~ 85A 0 ~ 43A 0 ~ 35A 0 ~ 22A 0 ~ 11A RATED POWER 280.5W 425W 480W 480W 480W 480W PEAK LOAD(10min.) Note.5 280.5W 425W 516W 525W 528W 528W OUTPUT RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 150mVp-p 150mVp-p 240mVp-p VOLTAGE ADJ. RANGE 2.9 ~ 3.6V 4.5 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 18V 22 ~ 27.6V 41~ 56V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 1.5% 1.5% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.3% 0.3% 0.2% 0.2% LOAD REGULATION 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% SETUP, RISE, HOLD TIME 1000ms, 80ms, 18ms/230VAC 2500ms, 80ms, 18ms/115VAC at full load VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47~63Hz POWER FACTOR PF>0.95/230VAC PF>0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 73% 79% 85% 85% 87% 89% AC CURRENT 6.5A/115VAC 3.5A/230VAC INRUSH CURRENT (max.) 25A/115VAC 40A/230VAC LEAKAGE CURRENT <2mA / 240VAC 87 ~ 103A 87 ~ 103A 45.15 ~ 58.05A 36.75 ~ 47.25A 23.1 ~ 29.7A 11.55 ~ 14.85A OVER LOAD Protection type : Constant current limiting, recovers automatically after conditions is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 18 ~ 21V 28.8 ~ 33.6V 57.6 ~ 67.2V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 80 (TSW1) Detect on heatsink of power transistor 90 (TSW2) Detect on heatsink of power diode OVER TEMPERATURE Note.4 Protection type : Shut down o/p voltage, recovers automatically after temperature goes down FUNCTION REMOTE CONTROL RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off -20 ~ +60 (Refer to output load derating curve) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 Approved WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:Short ISOLATION RESISTANCE I/P-O/P, I/P-FG:100M Ohms/500VDC SAFETY & EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B EMC (Note 6) HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) light industry level, criteria A MTBF 120.5K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 278*127*43mm (L*W*H) 1.7Kg; 6pcs/11.3Kg/0.67CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. TSW1: Detect on heatsink of power transistor. TSW2: Detect on heatsink of output diode. 5. 33% Duty cycle maximum within every 30 minute. Average output power should not exceed the rated power. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:SP-480-SPEC 2004-08-03 480W Single Output with PFC Function SP -480 s e r i e s Mechanical Specification Case No. 929 Unit:mm 216 31 21 36 25 CN51 4 1 ADJ. 4-M4 9 Air flow 8 direction 7 6 5 4 3 2 1 1.5 4-M4 L=6 216 31 19 278 Terminal pin number assignment : Connector pin number assignment (CN51) : JST B6B-PHDSS or equivalent Pin No. Assignment Pin No. Assignment Pin No. Assignment Pin No. Assignment Mating Housing Terminal 1 AC/L 4~6 -V 1 GND 4 N.C. JST PHDR-06VS JST SPHD-002T-P0.5 2 AC/N 7~9 +V 2 5 RC- RC+ or equivalent or equivalent 3 FG 3 -S 6 +S Block Diagram fosc : 100KHz FAN +S ACTIVE RECTIFIERS POWER RECTIFIERS +V EMI INRUSH I/P & SWITCH- & CURRENT FILTER -V (GND) P.F.C. ING FILTER LIMITING -S DETECTION FG O.L.P. CIRCUIT PFC/PWM CONTROL O.T.P. O.V.P. RC+ RC- Derating Curve Static Characteristics Ta=25 100 100 90 1 80 80 2 1 Others 70 60 3.3,5V Only 2 60 40 50 20 40 -20 0 10 20 30 40 50 60 85 90 115 120 140 165 180 200 220 240 260 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:SP-480-SPEC 2004-08-03 LOAD (%) 11.5 9.25 11 LOAD (%) 8.8 25.4 89 19 127 43 60 33.5
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the SP-480-24 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Mean Well ES18U09-P1J Power Supply 18W; 9.0V@2.00A; 2.1*5.5*11/C+/6F1185 (79x54x33 mm) Wallmount Enc...
Mean Well ES25B48-P1J Power Supply - 25W; 48V@0.52A; 2.1*5.5*11/C+/6F1185 (79 x 54 x 33mm) Desktop E...
Manufacturers






What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods