MEAN WELL SP-150-3.3

150W Single Output with PFC Function SP-150 s e ri e s Features : Universal AC input / Full range Built-in active PFC function, PF>0.93 Protections: Short circuit / Overload / Over voltage / Over temperature Built-in constant current limiting circuit Remote ON-OFF control(Optional) LED indicator for power on 100% full load burn-in test Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty SPECIFICATION MODEL SP-150-3.3 SP-150-5 SP-150-7.5 SP-150-12 SP-150-13.5 SP-150-15 SP-150-24 SP-150-27 SP-150-48 DC VOLTAGE 3.3V 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 30A 30A 20A 12.5A 11.2A 10A 6.3A 5.6A 3.2A CURRENT RANGE 0 ~ 30A 0 ~ 30A 0 ~ 20A 0 ~ 12.5A 0 ~ 11.2A 0 ~ 10A 0 ~ 6.3A 0 ~ 5.6A 0 ~ 3.2A RATED POWER 99W 150W 150W 150W 151.2W 150W 151.2W 151.2W 153.6W RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p OUTPUT VOLTAGE ADJ. RANGE 3.14 ~ 3.63V 4.75 ~ 5.5V 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 600ms, 30ms at full load HOLD UP TIME (Typ.) 20ms at full load VOLTAGE RANGE Note.5 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC PF>0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 67% 75% 79% 80% 80% 81% 83% 84% 84% AC CURRENT (Typ.) 2.5A/115VAC 1.2A/230VAC INRUSH CURRENT (Typ.) COLD START 40A/230VAC LEAKAGE CURRENT <2mA / 240VAC 105 ~ 150% rated output power OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.63 ~ 4.46V 5.5 ~ 6.75V 8.25 ~ 10.13V 13.2 ~ 16.2V 14.85 ~ 18.2V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 95 5 (TSW1 : detect on heatsink of power transistor) OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF FUNCTION REMOTE CONTROL(OPTION) WORKING TEMP. -10 ~ +60 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH TEMP. COEFFICIENT 0.05%/ (0 ~ 50 VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 191.2K hrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 199*99*50mm (L*W*H) PACKING 0.76Kg; 20pcs/16.4Kg/1.28CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:SP-150-SPEC 2011-08-23 150W Single Output with PFC Function SP-150 s e ri e s Mechanical Specification Case No. 916A Unit:mm 199 20 35 133 25 117 70 65 CN1 1 R.C. 2 +V ADJ. LED 7 6 5 2-M4 L=5mm 4 5-M3 L=3mm 3 2 1 Terminal Pin No. Assignment 15 Pin No. Assignment Pin No. Assignment 142 1 AC/L 4,5 DC OUTPUT -V 25 2 AC/N 6,7 DC OUTPUT +V 3 FG 11 max. Remote ON/OFF(CN1):JST S2B-XH or equivalent(optional) Pin No. Assignment Mating Housing Terminal 1 RC+ JST XHP JST SXH-001T-P0.6 or equivalent or equivalent 2 RC- 6-M4 L=6mm PFC fosc : 67KHz Block Diagram PWM fosc : 134KHz EMI FILTER RECTIFIERS POWER PFC +V I/P & & CIRCUIT SWITCHING -V RECTIFIERS FILTER CONSTANT CURRENT LIMITING & FG DETECTION O.L.P. PWM & PFC CIRCUIT ACTIVE CONTROL START O.V.P. CIRCUIT O.T.P. REMOTE CN1 CONTROL Derating Curve Output Derating VS Input Voltage SP-150-12~48 100 100 SP-150-3.3~7.5 (With 18CFM FAN) 90 80 80 70 60 SP-150-3.3 SP-150-5 SP-150-7.5 60 40 50 20 40 -10 0 10 20 30 40 45 50 (HORIZONTAL) 85 100 115 135 155 230 264 -10 0 10 20 35 45 50 55 (VERTICAL) AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz File Name:SP-150-SPEC 2011-08-23 9.5 8 LOAD (%) 16 25 49.5 12.5 25 38 51 10 79 50 LOAD (%) 99 119